Deconvolved electrical impedance spectra track distinct cell morphology changes

1996 ◽  
Vol 43 (6) ◽  
pp. 607-618 ◽  
Author(s):  
D.A. McRae ◽  
M.A. Esrick
1996 ◽  
Vol 226 (1) ◽  
pp. 59-69 ◽  
Author(s):  
Yoshiko Kita ◽  
Julia Tseng ◽  
Thomas Horan ◽  
Jie Wen ◽  
John Philo ◽  
...  

2015 ◽  
Vol 29 (1) ◽  
pp. 61-66 ◽  
Author(s):  
Ákos Kertész ◽  
Zuzana Hlaváčová ◽  
Eszter Vozáry ◽  
Lenka Staroňová

Abstract Electrical properties of food materials can give information about the inner structure and physiological state of biological tissues. Generally, the process of drying of fruits and vegetables is followed by weight loss. The aim of this study was to measure the impedance spectra of carrot slices during drying and to correlate impedance parameters to moisture content in different drying periods. Cylindrical slices were cut out from the carrot root along the axis. The slices were dried in a Venticell 111 air oven at 50°C. The weight of the slices was measured with a Denver SI-603 electronic analytical and precision balance. The weighing of the samples was performed every 30 min at the beginning of drying and every 60 min after the process. The moisture content of the samples was calculated on wet basis. The magnitude and phase angle of electrical impedance of the slices were measured with HP 4284A and 4285A precision LCR meters in the frequency range from 30 Hz to 1 MHz and from 75 kHz to 30 MHz, respectively, at voltage 1 V. The impedance measurement was performed after weighting. The change in the magnitude of impedance during drying showed a good correlation with the change in the moisture content.


Author(s):  
В.М. Капралова ◽  
И.Ю. Сапурина ◽  
Н.Т. Сударь ◽  
А.А. Третьяков ◽  
O. Gryshkov ◽  
...  

The impedance spectra of composite nonwoven materials based on nano- and microfibers of polyvinylidene fluoride-trifluoroethylene copolymer modified by polypyrrole with different doping degree were studied in the frequency range 1000 Hz-5 MHz. It was found that an increase in the doping degree of polypyrrole coating of nanofibers leads to a decrease in the imaginary and real components of the electrical impedance. Regardless of their magnitude, the shape of the hodographs is close to circular arc resting on the ReZ axis, which allows us to consider the studied material as a nanocomposite polymer electrolyte whose dielectric characteristics can be reversibly changed.


2010 ◽  
Vol 22 (12) ◽  
pp. 2949-2954
Author(s):  
任长虹 Ren Changhong ◽  
袁广江 Yuan Guangjiang ◽  
高艳 Gao Yan ◽  
吴永红 Wu Yonghong ◽  
徐志伟 Xu Zhiwei ◽  
...  

2019 ◽  
Vol 7 (1) ◽  
pp. 35-54 ◽  
Author(s):  
Tushar Kanti Bera ◽  
Nagaraju Jampana ◽  
Gilles Lubineau

Abstract Under an alternating electrical signal, biological tissues produce a complex electrical bioimpedance that is a function of tissue composition and applied signal frequencies. By studying the bioimpedance spectra of biological tissues over a wide range of frequencies, we can noninvasively probe the physiological properties of these tissues to detect possible pathological conditions. Electrical impedance spectroscopy (EIS) can provide the spectra that are needed to calculate impedance parameters within a wide range of frequencies. Before impedance parameters can be calculated and tissue information extracted, impedance spectra should be processed and analyzed by a dedicated software program. National Instruments (NI) Inc. offers LabVIEW, a fast, portable, robust, user-friendly platform for designing data-analyzing software. We developed a LabVIEW-based electrical bioimpedance spectroscopic data interpreter (LEBISDI) to analyze the electrical impedance spectra for tissue characterization in medical, biomedical and biological applications. Here, we test, calibrate and evaluate the performance of LEBISDI on the impedance data obtained from simulation studies as well as the practical EIS experimentations conducted on electronic circuit element combinations and the biological tissue samples. We analyze the Nyquist plots obtained from the EIS measurements and compare the equivalent circuit parameters calculated by LEBISDI with the corresponding original circuit parameters to assess the accuracy of the program developed. Calibration studies show that LEBISDI not only interpreted the simulated and circuit-element data accurately, but also successfully interpreted tissues impedance data and estimated the capacitive and resistive components produced by the compositions biological cells. Finally, LEBISDI efficiently calculated and analyzed variation in bioimpedance parameters of different tissue compositions, health and temperatures. LEBISDI can also be used for human tissue impedance analysis for electrical impedance-based tissue characterization, health analysis and disease diagnosis.


Sign in / Sign up

Export Citation Format

Share Document