Fuzzy graphic rule network and its application on water bath temperature control system

Author(s):  
C. Treesatayapun ◽  
S. Uatrongjit ◽  
K. Kantapanit
2014 ◽  
Vol 631-632 ◽  
pp. 743-746
Author(s):  
Wen Biao Wang ◽  
Zhan Yuan Ge ◽  
Si Yuan Wang ◽  
Shuang Chen

Aiming at the water bath temperature control system of great inertia, pure time-delay, non-linear and time changeable characteristics, a kind of simple and practical control algorithm is put forward in this paper:ITGC (Intelligent Track Guiding Control). ITGC and PID control system was carried out respectively step response test and the disturbance test in the MATLAB/SIMULINK simulation platform; And can be successfully applied in practical projects. Studies have shown that: ITGC control on the overshoot and adjustment time are better than the conventional PID method, the control scheme has stronger robustness and anti-jamming capability under various operating conditions and an increase in external disturbance case. Successfully resolved the difficulty of time-varying parameters and large lag in the temperature control system.


2012 ◽  
Vol 462 ◽  
pp. 753-756
Author(s):  
Zhi Yong Zhang ◽  
Tie Liang Guo

The features and working principle of single-wire digital temperature sensor DS18B20 are introduced. Through applying single chip microcontroller AT89C51, the water bath temperature control system is designed based on DS18B20. The paper also gives the structure of the hardware device, main design of software and the C51 program of DS18B20. In the end, the experimental result shows that the DS18B20 system has a higher accuracy.


1985 ◽  
Vol 15 (2) ◽  
pp. 472-474
Author(s):  
D. W. Waldren ◽  
M. K. McKinnis ◽  
W. C. Carlson

A soil temperature control system is described which allows control of soil temperature ± 1.1 °C, maintenance of water-bath level and pot placement during irrigation, and unrestricted soil drainage. The system also allows the use of a large number of pots (300) held at each soil temperature, with a capacity of three seedlings per pot, and is constructed of low-cost, readily available materials. This system facilitates the use of large experimental designs with relatively low labor inputs during the experiment.


2017 ◽  
Vol 3 (2) ◽  
pp. 88
Author(s):  
Suci Rahmatia ◽  
Marsah Zaysi Makhudzia

<p><em>Abstrak <strong>- </strong></em><strong>Transformator adalah peralatan listrik yang sangat vital dalam proses pembangkitan maupun transmisi energi listrik karena transformator dapat menaikkan atau menurunkan tegangan. Pada proses menaikkan dan menurunkan tegangan biasanya sering timbul panas akibat rugi – rugi tembaga pada inti besi dan kumparannya sehingga pada kondisi overload akan menimbulkan pemanasan yang berlebih dan dapat mempengaruhi kinerja transformator. Oleh karena itu dibuat sistem kontrol temperatur pada transformer yang dapat mengontrol temperatur di dalam transformator saat bekerja pada kondisi overload, sehigga transformatornya tidak terbakar. Dial thermometer digunakan sebagai alat yang mengontrol temperatur transformator pada sistem kontrol temperatur. Agar mendapatkan sistem kontrol yang optimal, maka setting temperatur pada dial thermometer di sesuaikan dengan temperatur maksimal tranformator dapat bekerja. Sehingga pada saat temperatur tertentu dial thermometer dapat memberikan sinyal untuk membunyikan alarm dan mengaktifkan kontrol kipas sehingga kipas dapat bekerja menurunkan temperatur transformator.<em></em></strong></p><p><strong><em> </em></strong></p><p><strong><em>Kata kunci - </em></strong><em>transformator, rugi – rugi tembaga, temperatur, sistem kontrol, dial thermometer<strong>.</strong></em></p><p><strong><em> </em></strong></p><p><em>Abstract <strong>- </strong></em><strong>A transformer is an electrical device that is vital in the generation and transmission of electrical energy because the transformer can raise (stepping up) or lower (stepping down) the voltage. In the process of raising and lowering the voltage is usually often caused heat loss of copper in iron core and coil so that the overload condition will cause excessive warming and can affect the performance of the transformer. Therefore, a temperature control system on the transformer can control the temperature inside the transformer while working under overload conditions, so the transformer is not burned. Dial thermometer is used as a device that controls the temperature of the transformer in the temperature control system. In order to obtain an optimal control system, the temperature setting on the dial thermometer adjusted to the maximum transformer temperature can work. So that when a certain temperature dial thermometer can provide a signal to sound the alarm and activate the fan control so that the fan can work down the transformer temperature.</strong></p><p><strong> </strong></p><p><strong><em>Keywords -  </em></strong><em>transformator, loss of copper, themperature, control system, dial thermometer<strong></strong></em></p>


Sign in / Sign up

Export Citation Format

Share Document