Path Tracking Controller Design of Automatic Guided Vehicle Based on Four-Wheeled Omnidirectional Motion Model

2020 ◽  
Vol 17 (2) ◽  
pp. 7996-8010
Author(s):  
X. Wu ◽  
Y. Yang
Keyword(s):  
Control System ◽  
Fuzzy Controller ◽  
Controller Design ◽  
Threshold Value ◽  
Position Angle ◽  
Path Tracking ◽  
Global Coordinate System ◽  
Automatic Guided Vehicle ◽  
Input Variables ◽  
Industrial Pc

This paper presents a new design of omnidirectional automatic guided vehicle based on a hub motor, and proposes a joint controller for path tracking. The proposed controller includes two parts: a fuzzy controller and a multi-step predictive optimal controller. Firstly, based on various steering conditions, the kinematics model of the whole vehicle and the pose (position, angle) model in the global coordinate system are introduced. Secondly, based on the modeling, the joint controller is designed. Lateral deviation and course deviation are used as the input variables of the control system, and the threshold value is switched according to the value of the input variable to realise the correction of the large range of posture deviation. Finally, the joint controller is implemented by using the industrial PC and the self-developed control system based on the Freescale minimum system. Path tracking experiments were made under the straight and circular paths to test the ability of the joint controller for reducing the pose deviation. The experimental results show that the designed guided vehicle has excellent ability to path tracking, which meets the design goals.

scholarly journals Gain-Preserving Data-Driven Approximation of the Koopman Operator and Its Application in Robust Controller Design

Mathematics ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 949
Author(s):  
Keita Hara ◽  
Masaki Inoue
Keyword(s):  
Controller Design ◽  
Internal Model Control ◽  
Feedback Controller ◽  
Data Driven ◽  
Koopman Operator ◽  
Plant System ◽  
Dimensional Approximation ◽  
Model Control ◽  
Data Driven Modeling ◽  
L2 Gain

In this paper, we address the data-driven modeling of a nonlinear dynamical system while incorporating a priori information. The nonlinear system is described using the Koopman operator, which is a linear operator defined on a lifted infinite-dimensional state-space. Assuming that the L2 gain of the system is known, the data-driven finite-dimensional approximation of the operator while preserving information about the gain, namely L2 gain-preserving data-driven modeling, is formulated. Then, its computationally efficient solution method is presented. An application of the modeling method to feedback controller design is also presented. Aiming for robust stabilization using data-driven control under a poor training dataset, we address the following two modeling problems: (1) Forward modeling: the data-driven modeling is applied to the operating data of a plant system to derive the plant model; (2) Backward modeling: L2 gain-preserving data-driven modeling is applied to the same data to derive an inverse model of the plant system. Then, a feedback controller composed of the plant and inverse models is created based on internal model control, and it robustly stabilizes the plant system. A design demonstration of the data-driven controller is provided using a numerical experiment.

scholarly journals Adaptive Multivariable Super-Twisting Sliding Mode Controller and Disturbance Observer Design for Hypersonic Vehicle

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Wenru Fan ◽  
Bailing Tian
Keyword(s):  
Disturbance Observer ◽  
Controller Design ◽  
Sliding Mode ◽  
Hypersonic Vehicle ◽  
Observer Design ◽  
Sliding Mode Controller ◽  
Finite Time Convergence ◽  
Gain Adaptation ◽  
Chattering Reduction ◽  
Sliding Manifold

A multivariable super-twisting sliding mode controller and disturbance observer with gain adaptation, chattering reduction, and finite time convergence are proposed for a generic hypersonic vehicle where the boundary of aerodynamic uncertainties exists but is unknown. Firstly, an input-output linearization model is constructed for the purpose of controller design. Then, the sliding manifold is designed based on the homogeneity theory. Furthermore, an integrated adaptive multivariable super-twisting sliding mode controller and disturbance observer are designed in order to achieve the tracking for step changes in velocity and altitude. Finally, some simulation results are provided to verify the effectiveness of the proposed method.

Multi-objective adaptive cruise controller design using nonlinear predictive controller with the objective function with variable weights determined by fuzzy logic controller

2021 ◽  
pp. 095440702110147
Author(s):  
Behzad Samani ◽  
Amir H. Shamekhi
Keyword(s):  
Objective Function ◽  
Fuzzy Logic Controller ◽  
Fuzzy Controller ◽  
Controller Design ◽  
Hierarchical Control ◽  
Control Input ◽  
Cruise Control ◽  
Model Predictive Controller ◽  
Control Step ◽  
Predictive Controller

In this paper, an adaptive cruise control system with a hierarchical control structure is designed. The upper-level controller is a model predictive controller (MPC) that by minimizing an objective function in the presence of the constraints, calculates the desired acceleration as control input and sends it to the lower-level controller. So the lower-level controller, which is a fuzzy controller, determines the amount of throttle valve opening or brake pressure to get the car to this desired acceleration. The model predictive controller performs optimization at each control step to minimize the objective function and achieve the reference values. Usually, the objective function has predetermined and constant weights to meet objectives such as maintain the driver’s desired speed and increase safety and in some cases increase comfort and reduce fuel consumption. In this paper, it is suggested that instead of using constant weights in the objective function, these weights should be determined by a fuzzy controller, depending on the different conditions in which the car is placed. The simulation results show that the variability of the weights of the objective function achieves control objectives much better than the optimization of the objective function with constant weights.

scholarly journals Actuator Saturated Fuzzy Controller Design for Interval Type-2 Takagi-Sugeno Fuzzy Models with Multiplicative Noises

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 823
Author(s):  
Wen-Jer Chang ◽  
Yu-Wei Lin ◽  
Yann-Horng Lin ◽  
Chin-Lin Pen ◽  
Ming-Hsuan Tsai
Keyword(s):  
Nonlinear Systems ◽  
Fuzzy Controller ◽  
Controller Design ◽  
Actuator Saturation ◽  
Design Method ◽  
Fuzzy Model ◽  
The Stability ◽  
Interval Type ◽  
Takagi Sugeno

In many practical systems, stochastic behaviors usually occur and need to be considered in the controller design. To ensure the system performance under the effect of stochastic behaviors, the controller may become bigger even beyond the capacity of practical applications. Therefore, the actuator saturation problem also must be considered in the controller design. The type-2 Takagi-Sugeno (T-S) fuzzy model can describe the parameter uncertainties more completely than the type-1 T-S fuzzy model for a class of nonlinear systems. A fuzzy controller design method is proposed in this paper based on the Interval Type-2 (IT2) T-S fuzzy model for stochastic nonlinear systems subject to actuator saturation. The stability analysis and some corresponding sufficient conditions for the IT2 T-S fuzzy model are developed using Lyapunov theory. Via transferring the stability and control problem into Linear Matrix Inequality (LMI) problem, the proposed fuzzy control problem can be solved by the convex optimization algorithm. Finally, a nonlinear ship steering system is considered in the simulations to verify the feasibility and efficiency of the proposed fuzzy controller design method.

Sign in / Sign up

Export Citation Format

Share Document