Microstrip Patch Antenna Gain Enhancement using Near-zero Index Metamaterial Superstrate (NZIM Lens)

2019 ◽  
Author(s):  
Rohan Deshmukh ◽  
Dushyant Marathe ◽  
K. D. Kulat
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Zero Index

Gain Enhancement for Whole Ultra-Wideband Frequencies of a Microstrip Patch Antenna

2020 ◽  
Vol 17 (2) ◽  
pp. 1469-1473
Author(s):  
Ahmed Jamal Abdullah Al-Gburi ◽  
I. M. Ibrahim ◽  
Z. Zakaria
Keyword(s):  
Frequency Band ◽  
Parametric Study ◽  
Patch Antenna ◽  
Satellite Communication ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Antenna Gain ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

A rectangular microstrip patch antenna over ultra-wideband with superstrate are designed and analyzed. Four iterations A, B, C, D were designs. Iterations A and B represent the parametric study of the microstrip patch antenna. Iteration C represents Ultrawide band microstrip patch antenna with peak realized gain 4.196 dB at frequency 10.12 GHz, the gain was enhance using superstrate above the microstrip patch antenna as in iteration D, a novel enhancement happens for the whole ultra-wideband frequency band (3.1–10.6 GHz) with highest salient realised gain of 5.3 dB at frequency 10.55 GHz. The proposed antenna gain at iteration D is increased by 26.49%, which is useful for many applications such as satellite communication. Simulation and discussion results of the proposed antenna are present within this paper.

scholarly journals Wearable antenna gain enhancement using reactive impedance substrate

2019 ◽  
Vol 13 (2) ◽  
pp. 708 ◽  
Author(s):  
A.N. Suraya ◽  
T. Sabapathy ◽  
M. Jusoh ◽  
N.H. Ghazali ◽  
M.N. Osman ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Gain Bandwidth ◽  
Bandwidth Enhancement ◽  
Gain Enhancement ◽  
Wearable Antenna ◽  
Microstrip Patch

A microstrip patch antenna is designed for a wearable antenna. The performance of microstrip patch antenna loaded with reactive impedance surface (RIS) is described in terms of gain, bandwidth and return loss. The antenna is investigated in two conditions which are conventional microstrip antenna with RIS and without RIS. The designed antenna is also aimed at size reduction therefore it will be suitable for a wearable application. This antenna which is made fully using textile and it is designed for operation in the 2.45 GHz band. The performance of microstrip patch antenna loaded with RIS is described in terms of gain, bandwidth, return loss and radiation pattern. The antenna designed with RIS operates at 2.45 GHz. Bandwidth enhancement is achieved with RIS where the designed antenna can cater frequency from 2.4 GHz to 3 GHz. A gain enhancement is achieved of 20% is achieved compared with the conventional patch antenna. Although the size of the patch is reduced with the introduction of RIS, the overall size of the antenna with the substrate is almost similar to the conventional patch antenna. However, the performance of the antenna is greatly enhanced with the use of RIS.

scholarly journals Microstrip patch antenna with metamaterial using superstrate technique for wireless communication

2021 ◽  
Vol 10 (4) ◽  
pp. 2055-2061
Author(s):  
Rasha Mahdi Salih ◽  
Ali Khalid Jassim
Keyword(s):  
Wireless Communications ◽  
Reflection Coefficient ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Relative Permittivity ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Microstrip Patch ◽  
Antenna Performance

This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.

scholarly journals Gain Enhancement of Microstrip Antenna using Ebg Structure for Wi-Fi Application

2019 ◽  
Vol 9 (1) ◽  
pp. 1213-1217
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Single Frequency ◽  
Total Size ◽  
Compact Structure ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile

A microstrip patch antenna is low profile antenna mounted over a high impedance electromagnetic bandgap (EBG) substrate is proposed. In this paper, Microstrip patch antenna with rectangular EBG structure is proposed and studied. The proposed antenna has compact structure with a total size of 29.44x38.036mm2 . The designed antenna resonates at Particular Single frequency with improved return loss, VSWR and gain. The resonant frequency of the antenna 2.4GHz without and with EBG and improved return loss of -17.61dB and -18.30dB. With rectangular EBG the antenna gives improved gain of 2.09 dB. The Proposed antenna is simulated by using Simulation software ie.(IE3D) and simulated results are in good with practical antenna characteristics.

Sign in / Sign up

Export Citation Format

Share Document