scholarly journals Microstrip patch antenna with metamaterial using superstrate technique for wireless communication

2021 ◽  
Vol 10 (4) ◽  
pp. 2055-2061
Author(s):  
Rasha Mahdi Salih ◽  
Ali Khalid Jassim
Keyword(s):  
Wireless Communications ◽  
Reflection Coefficient ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Relative Permittivity ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Microstrip Patch ◽  
Antenna Performance

This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.

scholarly journals Enhancement of gain using a multilayer superstrate metasurface cell array with a microstrip patch antenna

2021 ◽  
Vol 24 (3) ◽  
pp. 1564
Author(s):  
ِAli Khalid Jassim ◽  
Malik Jasim Farhan ◽  
Fadia Noori Hummadi Al-Nuaimy
Keyword(s):  
Reflection Coefficient ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Cell Array ◽  
Hexagonal Cell ◽  
Insulating Material ◽  
Microstrip Patch

This research presents a new idea in the use of wireless communication antennas: it uses a multi-layered array of cells called a superstrate multi-layer metasurface (MTM) and is placed in front of a patch of microstrip antenna to absorb surface waves and prevent them from passing through the insulating material, which reduces the permeability of the insulator and thus improves the Antenna properties, The proposed hexagonal cell with resonators is placed on the flame resistant (FR4) substrate, with a relative permittivity of 4.3 and an area (14×14) mm2 . It was tested when the metasurface layer is 4 mm in front of the patch and the distance between the metasurface layers is 2 mm. The optimum distances were calculated by the sweep parameter, and the improved antenna gain and the input reflection coefficient were obtained together. (S11) has been improved from -31.217 to -38.338 dB and, the gain from 3.28 dB to 6.554 dB.

scholarly journals A Butterfly-Shaped Wideband Microstrip Patch Antenna for Wireless Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Liling Sun ◽  
Maowei He ◽  
Jingtao Hu ◽  
Yunlong Zhu ◽  
Hanning Chen
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Frequency Identification

A novel butterfly-shaped patch antenna for wireless communication is introduced in this paper. The antenna is designed for wideband wireless communications and radio-frequency identification (RFID) systems. Two symmetrical quasi-circular arms and two symmetrical round holes are incorporated into the patch of a microstrip antenna to expand its bandwidth. The diameter and position of the circular slots are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by means of a prototype having a bandwidth of about 40.1%. The return loss of the butterfly-shaped antenna is greater than 10 dB between 4.15 and 6.36 GHz. The antenna can serve simultaneously most of the modern wireless communication standards.

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

scholarly journals Simple Mail Box Design of Dual Band Microstrip Patch Antenna for Wireless LAN Communications

2018 ◽  
Vol 7 (4) ◽  
pp. 587-592
Author(s):  
K. Thana Pakkiam ◽  
K. Baskaran ◽  
J. S. Mandeep
Keyword(s):  
Patch Antenna ◽  
Relative Permittivity ◽  
Wireless Lan ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Antenna Gain ◽  
Radiation Patterns ◽  
Feed Line ◽  
Microstrip Patch

In this paper, a simple mail box design of a dual band microstrip patch antenna, is proposed, designed, fabricated and measured for wireless LAN communications. The proposed antenna is designed using the TLC 30 (TACONIC) substrate, with a relative permittivity of 4.3 and substrate height of 1.6mm. It is designed to operate at 2.44 GHz and 5. 30 GHz respectively. The proposed antenna is the size of 31mm x 34mm x1.6mm and is incited by a 50 Ω micro strip feed line. The characteristics of the antenna are designed and the performance of the modelled antenna is evaluated using CST Microwave Studio. The return loss, radiation patterns and peak antenna gain of 6.5 dBi for frequency 2.44 GHz and 6.2 dBi for 5.30 GHz is separately and successfully plotted. The fabricated prototype exhibits an agreement between the measured and simulated return loss.

A Novel-Shaped Reduced Size FSS-Based Broadband High Gain Microstrip Patch Antenna for WiMAX/WLAN/ISM/X-Band Applications

2021 ◽  
pp. 2150290
Author(s):  
Kalyan Mondal
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Peak Gain

In this work, a broadband high gain frequency selective surface (FSS)-based microstrip patch antenna is proposed. The dimensions of the microstrip antenna and proposed FSS are [Formula: see text] and [Formula: see text]. A broadband high gain reference antenna has been selected to improve antenna performance. The reference antenna offers 1.2[Formula: see text]GHz bandwidth with 6.03[Formula: see text]dBi peak gain. Some modifications have been done on the patch and ground plane to enhance the bandwidth and gain. The impedance bandwidth of 7.70[Formula: see text]GHz (3.42–11.12[Formula: see text]GHz) with 4.9 dBi peak gain is achieved by the microstrip antenna without FSS. The antenna performance is improved by using FSS beneath the antenna structure. The maximum impedance bandwidth of 7.70[Formula: see text]GHz (3.32–11.02[Formula: see text]GHz) and peak gain of 8.6[Formula: see text]dBi are achieved by the proposed antenna with FSS. Maximum co- and cross-polarization differences are 21[Formula: see text]dB. The simulation and measurement have been done using Ansoft Designer software and vector network analyzer. The measured results are in good parity with the simulated one.

scholarly journals Wearable antenna gain enhancement using reactive impedance substrate

2019 ◽  
Vol 13 (2) ◽  
pp. 708 ◽  
Author(s):  
A.N. Suraya ◽  
T. Sabapathy ◽  
M. Jusoh ◽  
N.H. Ghazali ◽  
M.N. Osman ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Gain Bandwidth ◽  
Bandwidth Enhancement ◽  
Gain Enhancement ◽  
Wearable Antenna ◽  
Microstrip Patch

A microstrip patch antenna is designed for a wearable antenna. The performance of microstrip patch antenna loaded with reactive impedance surface (RIS) is described in terms of gain, bandwidth and return loss. The antenna is investigated in two conditions which are conventional microstrip antenna with RIS and without RIS. The designed antenna is also aimed at size reduction therefore it will be suitable for a wearable application. This antenna which is made fully using textile and it is designed for operation in the 2.45 GHz band. The performance of microstrip patch antenna loaded with RIS is described in terms of gain, bandwidth, return loss and radiation pattern. The antenna designed with RIS operates at 2.45 GHz. Bandwidth enhancement is achieved with RIS where the designed antenna can cater frequency from 2.4 GHz to 3 GHz. A gain enhancement is achieved of 20% is achieved compared with the conventional patch antenna. Although the size of the patch is reduced with the introduction of RIS, the overall size of the antenna with the substrate is almost similar to the conventional patch antenna. However, the performance of the antenna is greatly enhanced with the use of RIS.

scholarly journals Microstrip Patch Antenna Array Design Anaylsis for 5G Communication Applications

2020 ◽  
Vol 6 (5) ◽  
pp. 1-5
Author(s):  
Rovin Tiwari ◽  
Raghavendra Sharma ◽  
Rahul Dubey
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Basic Element ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Array Design ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Considerable Range

A research on Antenna design and simulation is a emerging area among researchers. Antenna is a basic element for wireless communication. There are various shaps and types of antenna, which uses in different allpication. Now a days Microstrip patch anteena is very useful in advance electronics devices applications. This paper focused on study based various types of microstrip antenna. Return loss, VSWR, bandwidth, resonant frequency and gain is key parameters to judge antenna performance. Good value of return loss is less than -10dB. Considerable range of VSWR is 1-2. CST microwave studio is a advance software to design and simulation of all types of antenna, filter etc.

Study of the Feeding Techniques of Microstrip Antenna at 28 GHz for 5G Applications

2015 ◽  
Vol 781 ◽  
pp. 49-52 ◽  
Author(s):  
Noor Ainniesafina Zainal ◽  
Muhammad Ramlee Kamarudin ◽  
Nor Hidayu Shahadan ◽  
Jamal Nasir ◽  
Mohsen Khalily ◽  
...  
Keyword(s):  
Reflection Coefficient ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Frequency Structure ◽  
Feeding Techniques

This work presents a simulation of two different feeding techniques of microstrip patch antenna for 28GHz, 5G applications. The antenna fed by inset feed line and coplanar feed line. The simulated results using High Frequency Structure Simulator (HFSS) shows that both the reflection coefficient of less than-10dB have been achieved over a frequency of 28GHz; demonstrate a gain of 7.96dBi and 5.72dBi for the inset feed line and coplanar feed line, respectively.

Sign in / Sign up

Export Citation Format

Share Document