scholarly journals Gain Enhancement of Microstrip Antenna using Ebg Structure for Wi-Fi Application

2019 ◽  
Vol 9 (1) ◽  
pp. 1213-1217
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Single Frequency ◽  
Total Size ◽  
Compact Structure ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile

A microstrip patch antenna is low profile antenna mounted over a high impedance electromagnetic bandgap (EBG) substrate is proposed. In this paper, Microstrip patch antenna with rectangular EBG structure is proposed and studied. The proposed antenna has compact structure with a total size of 29.44x38.036mm2 . The designed antenna resonates at Particular Single frequency with improved return loss, VSWR and gain. The resonant frequency of the antenna 2.4GHz without and with EBG and improved return loss of -17.61dB and -18.30dB. With rectangular EBG the antenna gives improved gain of 2.09 dB. The Proposed antenna is simulated by using Simulation software ie.(IE3D) and simulated results are in good with practical antenna characteristics.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals Performance Comparison of Swastika and Rectangular Shaped Microstrip Patch Antenna

2018 ◽  
Vol 1 (1) ◽  
pp. 11-14
Author(s):  
Suroj Burlakoti ◽  
Prakash Rai
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Performance Comparison ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch

In this paper, Microstrip patch antennas with rectangular and swastika shape of patch are designed and its performance parameters are compared with each other. Rectangular and Swastika shaped patch are considered in this paper with common rectangular ground plane. The antenna is simulated at 2.4 GHz using HFSS simulation software. This work mainly includes modification of antenna patch to improve the antenna parameters. The parameters of antenna such as Return loss, VSWR Bandwidth and radiation pattern are compared using simulation. The performance of Swastika shaped antenna was found to be better than rectangular shaped microstrip patch antenna with improved Return Loss, VSWR, Bandwidth and Radiation Pattern.

scholarly journals Gain Enhancement of a Microstrip Patch Antenna Using a Reflecting Layer

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Anwer Sabah Mekki ◽  
Mohd Nizar Hamidon ◽  
Alyani Ismail ◽  
Adam R. H. Alhawari
Keyword(s):  
Patch Antenna ◽  
Low Complexity ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile ◽  
Narrow Bandwidth ◽  
Military Systems ◽  
Small Antenna

A low profile, unidirectional, dual layer, and narrow bandwidth microstrip patch antenna is designed to resonate at 2.45 GHz. The proposed antenna is suitable for specific applications, such as security and military systems, which require a narrow bandwidth and a small antenna size. This work is mainly focused on increasing the gain as well as reducing the size of the unidirectional patch antenna. The proposed antenna is simulated and measured. According to the simulated and measured results, it is shown that the unidirectional antenna has a higher gain and a higher front to back ratio (F/B) than the bidirectional one. This is achieved by using a second flame retardant layer (FR-4), coated with an annealed copper of 0.035 mm at both sides, with an air gap of 0.04λ0as a reflector. A gain of 5.2 dB with directivity of 7.6 dBi, F/B of 9.5 dB, and −18 dB return losses (S11) are achieved through the use of a dual substrate layer of FR-4 with a relative permittivity of 4.3 and a thickness of 1.6 mm. The proposed dual layer microstrip patch antenna has an impedance bandwidth of 2% and the designed antenna shows very low complexity during fabrication.

A low profile miniaturized circular microstrip patch antenna for dual-band application

Frequenz ◽  
2020 ◽  
Vol 74 (9-10) ◽  
pp. 333-349
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Resonant Frequency ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Dual Band ◽  
Copper Sheet ◽  
Frequency Bands ◽  
Dedicated Short Range Communications ◽  
Microstrip Patch ◽  
Low Profile

AbstractA low profile Circular Microstrip Patch Antenna (CMPA) with radius 5 mm has been designed to generate two resonant frequency bands that can be used for WLAN 5.2 (5.15–5.25) GHz, Wi-Fi (5.725–5.850) GHz and Dedicated Short-Range Communications (DSRC) (5.85–5.925) GHz application bands. The designed antenna has been slitted with two slits and a stub has also been attached resulting in an additional resonant band alongside the primary resonant band. Also, primary resonant frequency shifted from 7.22 GHz to 5.87 GHz yielding about 18.7% antenna miniaturization. Frequency bands generated by the designed antenna are (5.15–5.25) GHz and (5.71–6.01) GHz having peak gain 2.3 and 4.9 dB with broadside radiation pattern. A square shape FR4 substrate having dimension 32 × 32 × 3.2 mm3 and very thin copper sheet for radiating patch and ground has been used in the proposed antenna, which can fulfill the requirement of smaller antenna with dual band application. Simulation software HFSS ver.13 has been used to design and analyze the proposed antenna. Very good matching has been obtained between simulated and measured results.

scholarly journals Wearable antenna gain enhancement using reactive impedance substrate

2019 ◽  
Vol 13 (2) ◽  
pp. 708 ◽  
Author(s):  
A.N. Suraya ◽  
T. Sabapathy ◽  
M. Jusoh ◽  
N.H. Ghazali ◽  
M.N. Osman ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Gain Bandwidth ◽  
Bandwidth Enhancement ◽  
Gain Enhancement ◽  
Wearable Antenna ◽  
Microstrip Patch

A microstrip patch antenna is designed for a wearable antenna. The performance of microstrip patch antenna loaded with reactive impedance surface (RIS) is described in terms of gain, bandwidth and return loss. The antenna is investigated in two conditions which are conventional microstrip antenna with RIS and without RIS. The designed antenna is also aimed at size reduction therefore it will be suitable for a wearable application. This antenna which is made fully using textile and it is designed for operation in the 2.45 GHz band. The performance of microstrip patch antenna loaded with RIS is described in terms of gain, bandwidth, return loss and radiation pattern. The antenna designed with RIS operates at 2.45 GHz. Bandwidth enhancement is achieved with RIS where the designed antenna can cater frequency from 2.4 GHz to 3 GHz. A gain enhancement is achieved of 20% is achieved compared with the conventional patch antenna. Although the size of the patch is reduced with the introduction of RIS, the overall size of the antenna with the substrate is almost similar to the conventional patch antenna. However, the performance of the antenna is greatly enhanced with the use of RIS.

scholarly journals E SHAPE MICROSTRIP PATCH ANTENNA WITH RECTANGULAR AND CIRCULAR SLOT

2020 ◽  
Vol 5 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Priyanka Jain ◽  
Raghavendra Sharma ◽  
Vandana Vikas Thakre
Keyword(s):  
Loss Tangent ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Microstrip Patch ◽  
Rectangular Patch

In this proposed design a Rectangular E shaped micro-strip patch antenna is present with rectangular and circular slot within the Rectangular patch which operate at frequency 2.4 GHz. By proposed antenna design and coaxial feeding at suitable place  the resultant return loss, VSWR and bandwidth will be find out. For the propose microstrip antenna we have use FR-4 substrate which contain permittivity of 4.4 and thickness 1.5, loss tangent is 0.02. HFSS simulation software is used for designing and analysis.

scholarly journals Gain enhancement of microstrip patch antenna using artificial magnetic conductor

2019 ◽  
Vol 8 (1) ◽  
pp. 166-171
Author(s):  
Norfatihah Bahari ◽  
Mohd Faizal Jamlos ◽  
Muammar Mohamad Isa
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Size Reduction ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Fifth Generation

The paper presents an artificial magnetic conductor (AMC) structure to enhance the gain of the double microstrip patch antenna. By placing this kind of metamaterial in between the two Rogers RT5880 substrates, the antenna achieved lots of improvement especially in terms of size miniaturization, bandwidth, return loss, gain and efficiency. The antenna is intended to operate at 16 GHz where the prospect fifth generation (5G) spectrum might be located. Integration of AMC structure into the proposed antenna helps to improve nearly 16.3% of gain and almost 23.6% of size reduction.

scholarly journals Concave Shape Microstrip Patch Antenna using SRR for 5G Applications

2019 ◽  
Vol 8 (9S) ◽  
pp. 743-746
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Split Ring Resonator ◽  
Microstrip Patch Antenna ◽  
Radiation Efficiency ◽  
Single Frequency ◽  
Split Ring ◽  
Microstrip Patch ◽  
Concave Shape

A single band microstrip-fed patch antenna is presented which contains the radiating structure having concave shape slots and split ring resonator loaded in the partial ground plane. This partial ground plane has been used to enhance the bandwidth of proposed antenna. Both the partial ground plane and radiating patch are perfect electric conductors. The patch is imprinted on a substrate named as Epoxy Glass FR-4 having thickness 1.6 mm, relative permittivity 4.4, and loss tangent 0.0024. The designed concave shape microstrip patch antenna (MPA) is resonate at single frequency band from 3.4-3.8 GHz with 400 MHz bandwidth and corresponding return loss of -25dB. A parametric study has been performed for the concave shape slots located in the patch. Proposed MPA is simulated using Computer Simulation Technology Microwave Studio Version 14.0 (CST MWS V14.0). Furthermore, the radiation performance of antenna in terms of gain and radiation efficiency has been analyzed . The proposed antenna is having a peak gain of 3.2 dB and radiation efficiency of 94%.

scholarly journals Circularly Polarized Slotted Microstrip Patch Antenna with Finite Ground Plane

2012 ◽  
Vol 1 (2) ◽  
pp. 97-106
Author(s):  
Sanyog Rawat ◽  
K K Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper a new geometry of circularly polarized patch antenna is proposed with improved bandwidth. The radiation performance of proposed patch antenna is investigated using IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna. The simulated return loss, axial ratio and impedance with frequency for the proposed antenna are reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slots, the impedance bandwidth can be enhanced upto 10.15% as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.DOI: 10.18495/comengapp.12.097106

scholarly journals Design Inset Fed Microstrip Patch Antenna for L-Band Applications

2021 ◽  
Vol 10 (5) ◽  
pp. 4-7
Author(s):  
Saidulu V.
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Beam Width ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Gain Bandwidth ◽  
Dielectric Substrates ◽  
Microstrip Patch ◽  
Minimum Bandwidth ◽  
L Band

Present paper focuses on design and simulation of an inset fed rectangular microstrip patch antenna for GPS applications. The proposed antenna is designed at frequency 1.9 GHz which comes in L-Band region and simulated using Electromagnetic Simulator such as HFSS simulation software with three different dielectric substrates and comparing their performance characteristics such as gain, bandwidth, beam width, VSWR and return loss. The simulation results shows that the maximum bandwidth is obtained with FR4 substrate and the minimum bandwidth is found with Arlon AD320 substrate, where as the maximum gain obtained with air (vaccum) substrate. The proposed antenna has been designed for the range of 1.9 GHz and which is highly suitable for GPS applications.

Sign in / Sign up

Export Citation Format

Share Document