Research on Sulfur Hexafluoride Management and Control Based on Radio Frequency Identification Method

Author(s):  
Qi Guodong ◽  
Xie Lianke ◽  
Qi Qiubo ◽  
Yu Naihai ◽  
Chen Yimin
2017 ◽  
Vol 29 (1) ◽  
pp. 136
Author(s):  
M. E. Kjelland ◽  
T. Loper ◽  
C. Woodley ◽  
T. M. Swannack ◽  
T. K. Stroud ◽  
...  

The assisted reproduction industry involving sales and services for gametes and embryos for domestic animals of commercial value is a large market totaling millions of dollars annually. The objective of this study was to develop and test gamete and embryo packaging—Inteli-Straws (I-S) equipped with radio-frequency identification (RFID) technology. Specifically, French straws (0.25 and 0.5 mL) were modified to include extreme cold-tolerant RFID microchips. Two groups of I-S were formed: Group (G)1: RFID chips that were autoclaved (n = 49), and G2: RFID chips that were not autoclaved (n = 47). Both groups had a control that was not exposed to liquid nitrogen (LN). Each group was exposed to LN up to 4 times: 2 slow freezes first and then 2 fast (i.e. vitrification) freezes, and I-S RFID chip survival was determined. I-S detection and readability (non-autoclaved) was also measured, placing I-S just above LN (in vapors, n = 43) or just below LN (n = 38). Statistical differences (α = 0.05) were determined using Fisher’s exact test. The results between G1 and G2 were not significantly different (P = 0.108) after 4 rounds of cryopreservation (and thawing). For G1, 98% (48/49) of the I-S RFID chips remained operational, and control and treatment were not significantly different (P = 1.000). For G2, 89.4% (42/47) of the autoclaved RFID chips remained operational, and control and treatment not significantly different (P = 0.099). RFID chip readability results; that is, the ability to detect the I-S versus not able to detect the I-S, comparing placement just above liquid nitrogen (LN) versus the placement just below LN were not significantly different (P = 0.105). Notably, detection differences varied within each group, with I-S in G1 (mean = 9.5; SD = 3.5 cm) readable at a larger distance, 5.2 cm farther than the mean of G2 (mean = 4.3; SD = 1.9 cm). During AI or embryo transfer (ET), a technician may not clearly identify the label or colour of straw, may incorrectly record the information, or may take more time than desirable to record it. Increased exposure times may lead to decreased viability of gametes and embryos. The results show that by using the I-S, one may quickly scan the straw within LN or LN vapors, thereby automatically detecting information and even uploading it to a database (e.g. scanner sophistication). We are not aware of comparable device to I-S for locating and retrieving associated information without removing the gamete/embryo packaging from LN or LN vapors; unlike traditionally labelled straws (e.g. laser etched or ink labels). Also, for AI and ET, the I-S can be quickly scanned and the straw information automatically detected and uploaded to a database.


2021 ◽  
Author(s):  
Narges Kasiri

Radio Frequency Identification (RFID) technology is one of the latest product tracking technologies being utilized by retailers. Operations management improvements were among the first recognized applications of this technology earlier in the century. RFID applications in managing retail operations, such as inventory management and control, lead to significant benefits. However, RFID applications are not limited to operations management and go beyond the operations side to offer improvements in other areas in retail such as marketing and managing customers’ shopping experiences. In this research, we review the applications of RFID technology in retail since its introduction and how those applications have evolved over the last two decades to help retailers provide omnichannel services to their customers in the current market. We will demonstrate what strategic and tactical factors have helped retailers implement this technology and what factors have slowed down the process of adoption. We will also report on the latest status of the utilization of RFID in the retail sector.


2019 ◽  
Vol 15 (5) ◽  
pp. 155014771984604 ◽  
Author(s):  
Liqian Zhang ◽  
Xueliang Fu ◽  
Honghui Li

In the mobile radio-frequency identification system, the accuracy and rapidity of tag recognition are undergoing great challenges. In this article, we proposed a novel tag anti-collision identification method based on tags’ priority called RPA in the mobile radio-frequency identification system. The algorithm sets the priority of recognition according to the sequence of tag entering the recognition area. The reader does not recognize the tags with low priority until the ones with high priority have been identified totally. The experimental results show that when the tags’ moving speed is lower than 4 m/s, the system can identify the total tags without loss, and the efficiency and identification speed can reach 73.7% and 762 tags per unit, respectively.


Author(s):  
Marco David Revelo ◽  
Victor Javier Montenegro

Ecuador subsidizes fuels, the problem with this benefit is that, many citizens are dedicated to illegally market these resources in border cities, among these fuels there are the cylinders of liquefied petroleum gas; the existing fragile control greatly benefits smuggling, representing a loss of resources for Ecuador.   There is no subsidy in neighboring countries such as Peru and Colombia, and unfortunately some citizens have chosen to engage in illegal fuel marketing, generating economic losses for the country. The actual cost of a 15 kilo gas cylinder is 12.00 dollars, however, it is sold at 1.60 dollar. It means that the government subsidizes 89% of the price of gas, with barely 11% being paid by consumers. (Diario el Comercio, 2013)   People who take advantage of the poor control of illegal marketing, reduce the number of cylinders in border areas of Ecuador and therefore increase the price, this situation has generated inconveniences for Ecuadorian citizens when they can not acquire gas cylinders. Currently, given the advance of technology in particular of microelectronics, it is very common to use portable electronic devices such as RFID (Radio Frequency Identifier) tags, for this project the active labels of 2.4 GHz allow the unique identification of each gas cylinder, as well as the portability of the information and the relation of belonging between gas cylinders and citizens, facilitating their monitoring and control.


Author(s):  
Rogério Teixeira Reis ◽  
Bruno Pereira Barella ◽  
Marcelo Henrique Stoppa

Here is presented a survey of the most common cattle identification methods comparing advantages, disadvantages and costs in the utilization of a new Identification model that uses tags with Radio Frequency Identification Devices (RFID). From there, a RFID system of evaluation is proposed for management automated. When the herd pass through a monitored portal, it can be obtained the immediate identification of each animal. Three tests were performed to verify the better position of the RFID reader in order to determine a setting for it and verify that the settings selected for the assembly of the system remains adequate. The use of this system gives the producer an electronic identification,  facilitating the management, identification and control of the herd.


Sign in / Sign up

Export Citation Format

Share Document