Determination of assistance to the poor by integrating fuzzy AHP and TOPSIS models: (Case study Bali Province)

2017 ◽  
Author(s):  
Ida Bagus Kresna Sudiatmika ◽  
Rupika Jimbara ◽  
Djoko Budiyanto Setyohadi
Keyword(s):  
Fuzzy Ahp ◽  
The Poor

scholarly journals Morphology of the invasive 'Carpobrotus' (Aizoaceae) in Europe: Malta as a case study

2021 ◽  
Vol 42 ◽  
pp. e71195
Author(s):  
Stephen Mifsud
Keyword(s):  
Morphological Study ◽  
Mediterranean Region ◽  
Vegetative State ◽  
Morphological Characters ◽  
Maltese Islands ◽  
The Poor ◽  
Poor Understanding ◽  
Method Of Assessment

Since the late 19th century, different taxonomic views have been reported for Carpobrotus species occurring in the Maltese Islands, where the latest treatments imply two varieties of C. edulis and the doubtful occurrence of C. acinaciformis. Taxonomic inconsistencies are possibly derived from the poor understanding or misinterpretation of morphological characters. Moreover, the hybridogenous morphotypes resulting from horticultural advances make the determination of Carpobrotus even harder, especially with the application of outdated identification keys which do not take hybrids into account. The difficulty in determining Carpobrotus spp. has been expressed in several recent accounts within the Mediterranean region. A taxonomic investigation was carried out by applying eleven morphological characters adopted from recent monographs on 25 populations present in Malta. Three taxonomic units have been retrieved from the analyzed sample, where C. acinaciformis s.l. has been confirmed to represent all the purple-flowering populations and C. edulis s.s. for the yellow-flowering ones. Emphasis was given on the interpretation and understanding of distinctive morphological characters by employing a standardized method of assessment aided by images.  This comparative morphological study resulted in a new characteristic in the leaves of C. edulis, by which it could be easily distinguished from C. acinaciformis in the vegetative state. A detailed discussion about the two different morphotypes of C. acinaciformis s.l. and dichotomous keys to distinguish Carpobrotus taxa are also provided.

An Integrated Fuzzy Multi-Criteria Approach for E-Waste Collection Center Location Problem

2021 ◽  
Vol 10 (2) ◽  
pp. 21-38
Author(s):  
Hür Bersam Bolat ◽  
İrem Otay ◽  
Gül Tekin Temur ◽  
Şükrü İmre
Keyword(s):  
Fuzzy Ahp ◽  
Waste Recycling ◽  
Waste Collection ◽  
Location Selection ◽  
Recycling Industry ◽  
Center Location ◽  
Hierarchy Process ◽  
Selection Of

Selection of locations for collecting end of life goods is a multi-dimensional problem. In this study, the objective is to propose a hybrid multi-criteria decision model for e-waste collection center location selection problem employing an integrated Pythagorean fuzzy AHP (analytical hierarchy process)-VIKOR (multi-criteria optimization and compromise solution) methodology. A case study from Turkish e-waste recycling industry is conducted in order to verify the success of the proposed methodology. Thirty-nine alternative collection center districts are evaluated and ranked by employing Pythagorean fuzzy VIKOR based on “cost, logistics, environment, socio-culture, and population” and 11 sub-criteria. The study involves 39 e-waste collection location centers, and the model was solved for 50 times for 10 scenarios for each criterion. The results of sensitivity analysis indicate that the evaluation of criteria and determination of their weights have critical effects on the results.

A novel method for the determination of linting propensity of paper

TAPPI Journal ◽  
2012 ◽  
Vol 11 (10) ◽  
pp. 9-17
Author(s):  
ALESSANDRA GERLI ◽  
LEENDERT C. EIGENBROOD
Keyword(s):  
Ash Content ◽  
The Novel ◽  
Offset Printing ◽  
Excellent Correlation ◽  
End Conditions ◽  
Bottom Side ◽  
Novel Method ◽  
Total Fraction

A novel method was developed for the determination of linting propensity of paper based on printing with an IGT printability tester and image analysis of the printed strips. On average, the total fraction of the surface removed as lint during printing is 0.01%-0.1%. This value is lower than those reported in most laboratory printing tests, and more representative of commercial offset printing applications. Newsprint paper produced on a roll/blade former machine was evaluated for linting propensity using the novel method and also printed on a commercial coldset offset press. Laboratory and commercial printing results matched well, showing that linting was higher for the bottom side of paper than for the top side, and that linting could be reduced on both sides by application of a dry-strength additive. In a second case study, varying wet-end conditions were used on a hybrid former machine to produce four paper reels, with the goal of matching the low linting propensity of the paper produced on a machine with gap former configuration. We found that the retention program, by improving fiber fines retention, substantially reduced the linting propensity of the paper produced on the hybrid former machine. The papers were also printed on a commercial coldset offset press. An excellent correlation was found between the total lint area removed from the bottom side of the paper samples during laboratory printing and lint collected on halftone areas of the first upper printing unit after 45000 copies. Finally, the method was applied to determine the linting propensity of highly filled supercalendered paper produced on a hybrid former machine. In this case, the linting propensity of the bottom side of paper correlated with its ash content.

The Calculation of Turbulent Diffusion Coefficients in Aquatic Ecosystems

2019 ◽  
Vol 70 (11) ◽  
pp. 3903-3907
Author(s):  
Galina Marusic ◽  
Valeriu Panaitescu
Keyword(s):  
Transport Equation ◽  
Turbulent Diffusion ◽  
Diffusion Coefficients ◽  
Aquatic Ecosystems ◽  
Specific Area ◽  
Left Bank ◽  
The Right ◽  
Prut River

The paper deals with the issues related to the pollution of aquatic ecosystems. The influence of turbulence on the transport and dispersion of pollutants in the mentioned systems, as well as the calculation of the turbulent diffusion coefficients are studied. A case study on the determination of turbulent diffusion coefficients for some sectors of the Prut River is presented. A new method is proposed for the determination of the turbulent diffusion coefficients in the pollutant transport equation for specific sectors of a river, according to the associated number of P�clet, calculated for each specific area: the left bank, the right bank and the middle of the river.

scholarly journals Objective Evaluation of Drivability in Passenger Cars with Dual-Clutch Transmission: A Case Study of Static Gearshift Condition

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Wei Zhou ◽  
Xuexun Guo ◽  
Xiaofei Pei ◽  
Chengcai Zhang ◽  
Jun Yan ◽  
...  
Keyword(s):  
Fuzzy Ahp ◽  
Subjective Evaluation ◽  
Objective Evaluation ◽  
Dual Clutch Transmission ◽  
Evaluation Tool ◽  
Passenger Cars ◽  
Denoising Method ◽  
Fuzzy Matrix ◽  
Predictability Score

This paper is aimed at the problem that the subjective drivability evaluation by experienced test drivers is limited in time efficiency and is of high cost and poor repeatability. In this article, an intelligent drivability objective evaluation tool (I-DOET) for passenger cars with dual-clutch transmission (DCT) is developed and verified by real vehicle testing. First, the signal denoising method and its key parameters, which are suitable for drivability evaluation, are selected based on analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS). Besides, combined with the uncertainty characteristics of subjective judgment, a mathematical model of the objective drivability evaluation FARODE (fuzzy AHP-RS based on objective drivability evaluation) is proposed by using the fuzzy comprehensive assessment (FCA) method. The AHP and rough set (RS) method are used to calculate the subjective and objective weights of the drivability evaluation, respectively, and the proportion of subjective and objective weights is determined by the principle of minimum relative information entropy. The fuzzy matrix is built by membership function of the evaluation indexes. Finally, the static gearshift condition focused on by the subjective evaluation experts is taken as a case study. The predictability score is obtained by combining the drivability quantization lever vector, comprehensive weight, and fuzzy matrix. The experimental results indicate that the proposed method is applicable for objective drivability evaluation in passenger cars with DCT.

scholarly journals Investigations on historical monuments’ deterioration through chemical and isotopic analyses: an Italian case study

2021 ◽  
Author(s):  
Maria Ricciardi ◽  
Concetta Pironti ◽  
Oriana Motta ◽  
Rosa Fiorillo ◽  
Federica Camin ◽  
...  
Keyword(s):  
Potassium Nitrate ◽  
Sewage Water ◽  
X Ray Diffraction ◽  
Italian Case ◽  
Historical Monuments ◽  
Isotopic Analyses ◽  
Historic Centre ◽  
The Church

AbstractIn this paper, we analysed the efflorescences present in the frescos of a monumental complex named S. Pietro a Corte situated in the historic centre of Salerno (Campania, Italy). The groundwater of the historic centre is fed by two important streams (the Rafastia and the Fusandola) that can be the sources of water penetration. The aims of this work are to (i) identify the stream that reaches the ancient frigidarium of S. Pietro a Corte and (ii) characterize the efflorescences on damaged frescos in terms of chemical nature and sources. In order to accomplish the first aim, the water of the Rafastia river (7 samples) and the water of the Fusandola river (7 samples) were analysed and compared with the water of a well of the Church (7 samples). The ionic chromatography measurements on the water samples allowed us to identify the Rafastia as the river that feeds the ancient frigidarium of S. Pietro a Corte. To investigate the nature and the origin of the efflorescences (our second aim), anionic chromatography analyses, X-ray diffraction measurements, and the isotopic determination of nitrogen were performed on the efflorescences (9 samples) and the salts recovered from the well (6 samples). Results of these analyses show that efflorescences are mainly made of potassium nitrate with a δ15N value of + 9.3 ± 0.2‰. Consequently, a plausible explanation for their formation could be the permeation of sewage water on the walls of the monumental complex.

Chemical sensing failed by aggregation-caused quenching? A case study enables liquid/solid two-phase determination of N2H4

2021 ◽  
Vol 415 ◽  
pp. 128975
Author(s):  
Xiangqian Li ◽  
Mengqing Li ◽  
Yuze Chen ◽  
Gongxi Qiao ◽  
Qian Liu ◽  
...  
Keyword(s):  
Chemical Sensing ◽  
Phase Determination ◽  
Two Phase

The impact of acid hydrolysis conditions on carbohydrate determination in lignocellulosic materials: a case study with Eucalyptus globulus bark

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ricardo Jorge Oliveira ◽  
Bruna Santos ◽  
Maria J. Mota ◽  
Susana R. Pereira ◽  
Pedro C. Branco ◽  
...  
Keyword(s):  
Acid Hydrolysis ◽  
Eucalyptus Globulus ◽  
Industrial Processes ◽  
Lignocellulosic Materials ◽  
Optimal Conditions ◽  
Hydrolysis Conditions ◽  
The Impact ◽  
Eucalyptus Bark

Abstract Lignocellulosic biomass represents a suitable feedstock for production of biofuels and bioproducts. Its chemical composition depends on many aspects (e.g. plant source, pre-processing) and it has impact on productivity of industrial bioprocesses. Numerous methodologies can be applied for biomass characterisation, with acid hydrolysis being a particularly relevant step. This study intended to assess the most suitable procedures for acid hydrolysis, taking Eucalyptus globulus bark as a case study. For that purpose, variation of temperature (90–120 °C) was evaluated over time (0–5 h), through monosaccharides and oligosaccharides contents and degradation. For glucose, the optimal conditions were 100 °C for 2.5 h, reaching a content of 48.6 wt.%. For xylose, the highest content (15.2 wt.%) was achieved at 90 °C for 2 h, or 120 °C for 0.5 h. Maximum concentrations of mannose and galactose (1.0 and 1.7 wt.%, respectively) were achieved at 90 and 100 °C (2–3.5 h) or at 120 °C (0.5–1 h). These results revealed that different hydrolysis conditions should be applied for different sugars. Using this approach, total sugar quantification in eucalyptus bark was increased by 4.3%, which would represent a 5% increase in the ethanol volume produced, considering a hypothetical bioethanol production yield. This reflects the importance of feedstock characterization on determination of economic viability of industrial processes.

Sign in / Sign up

Export Citation Format

Share Document