Low Temperature Transient Liquid Phase Sintering (LT-TLPS) enables the formation of joints robust to high temperatures at low process temperatures. TLPS systems consist of one or more low temperature constituents (i.e. Sn) and one or more high temperature constituents (i.e. Cu). The sinter joints are formed by intermetallic compound formation between these constituents. In this paper a paste based LT-TLPS approach is demonstrated. The organic binders and fluxes used to mix the pastes prevent the metal particles from oxidation and facilitate a vacuum-free process in air without the need of a reducing atmosphere. Pastes based on the Cu-Sn system have been developed enabling a completely pressure-less process. Furthermore sinter pastes for LT-TLPS at low pressure (<0.5MPa) applied during the initial stage of the sintering process have been developed which form almost void free joints. To assess the strength of the sintered joints a high-temperature shear fixture has been designed. Shear tests have been performed at 25°C, 400°C, and 600°C to characterize the influence of high temperature conditions on the joint performance. The shear strength of the joints formed without pressure has been assessed for different Cu-to-Sn ratios at all temperature levels. It is shown that the maximum application temperature and shear strength depends on the ratio of low melting temperature and high melting temperature constituents. The pastes introduced here can be used to form joints resilient to application temperatures of up to 600°C. They show the potential to form joints for reliable operation under extreme temperature conditions.
