A Distributed Power Proportional Clustering Algorithm to Improve Energy Efficiency for Wireless Sensor Networks

2008 ◽  
Author(s):  
Tengfei Zhu ◽  
Jun Peng ◽  
Ying Guo ◽  
Xiaoyong Zhang ◽  
Fu Jiang ◽  
...  
2021 ◽  
pp. 163-174
Author(s):  
Levente Klein ◽  
Sergio Bermudez ◽  
Fernando Marianno ◽  
Hendrik Hamann

2014 ◽  
Vol 666 ◽  
pp. 322-326
Author(s):  
Yu Yang Peng ◽  
Jae Ho Choi

Energy efficiency is one of the important hot issues in wireless sensor networks. In this paper, a multi-hop scheme based on a cooperative multi-input multi-outputspatial modulation technique is proposed in order to improve energy efficiency in WSN. In this scheme, the sensor nodes are grouped into clusters in order to achieve a multi-input multi-output system; and a simple forwarding transmission scenario is considered so that the intermediate clusters only forward packets originated from the source cluster down to the sink cluster. In order to verify the performance of the proposed system, the bit energy consumption formula is derived and the optimal number of hopsis determined. By qualitative experiments, the obtained results show that the proposed scheme can deliver the data over multiple hops consuming optimal energy consumption per bit.


2015 ◽  
Vol 785 ◽  
pp. 744-750
Author(s):  
Lei Gao ◽  
Qun Chen

In order to solve the energy limited problem of sensor nodes in the wireless sensor networks (WSN), a fast clustering algorithm based on energy efficiency for wire1ess sensor networks is presented in this paper. In the system initialization phase, the deployment region is divided into several clusters rapidly. The energy consumption ratio and degree of the node are chosen as the selection criterion for the cluster head. Re-election of the cluster head node at this time became a local trigger behavior. Because of the range of the re-election is within the cluster, which greatly reduces the complexity and computational load to re-elect the cluster head node. Theoretical analysis indicates that the timing complexity of the clustering algorithm is O(1), which shows that the algorithm overhead is small and has nothing to do with the network size n. Simulation results show that clustering algorithm based on energy efficiency can provide better load balancing of cluster heads and less protocol overhead. Clustering algorithm based on energy efficiency can reduce energy consumption and prolong the network lifetime compared with LEACH protocol.


2011 ◽  
Vol 03 (09) ◽  
pp. 307-312 ◽  
Author(s):  
A. P. Abidoye ◽  
N. A. Azeez ◽  
A. O. Adesina ◽  
K. K. Agbele

2020 ◽  
Vol 16 (1) ◽  
pp. 66-74
Author(s):  
René Bergelt ◽  
Wolfram Hardt

Wireless sensor networks (WSN) are deployed in a multitude of applications both in industrial and academic fields. In recent years, due to the emerge of Internet of Things (IoT) technologies and Vehicle2X communication scenarios, novel challenges for wireless sensor network platforms - regarding hardware and software - arose. Thus, challenges known from big data processing have reached the WSN scope and consequently approaches and methods have been devised to handle these. One such approach is queriable wireless sensor networks which enable their users the specification of sensing tasks in a declarative way without the need to re-program nodes in case the application requirements change. As many current WSN applications feature active parts with which nodes can directly influence their environment, the term wireless sensor actuator networks (WSAN) has been coined, setting such networks apart from solely passively measuring networks.In this article, we will present a short introduction to big data processing in wireless sensor networks which motivates the usage of queriable networks. We will show that in order to enable a WSAN to carry out actions energy-efficiently and in a timely manner, an event-based action model is favorable. Additionally, we will demonstrate how such an event system can be used to improve sub query performance in WSNs. We conclude with an evaluation regarding the benefit of combining this approach with wake-up receiver technologies based on a qualitative energy efficiency definition for WSN.


2020 ◽  
pp. 249-261
Author(s):  
Nivetha Gopal ◽  
Venkatalakshmi Krishnan

Enhancing the energy efficiency and maximizing the networking lifetime are the major challenges in Wireless Sensor Networks (WSN).Swarm Intelligence based algorithms are very efficient in solving nonlinear design problems with real-world applications.In this paper a Swarm based Fruit Fly Optimization Algorithm (FFOA) with the concept of K-Medoid clustering and swapping is implemented to increase the energy efficiency and lifetime of WSN. A comparative analysis is performed in terms of cluster compactness,cluster error and convergence. MATLAB Simulation results show that K-Medoid Swapping and Bunching Fruit Fly optimization (KMSB-FFOA) outperforms FFOA and K-Medoid Fruit Fly Optimization Algorithm (KM-FFOA).


2012 ◽  
Vol 6-7 ◽  
pp. 831-835
Author(s):  
Chang Lin Ma ◽  
Yuan Ruan

In order to improve the lifetime and throughput of wireless sensor networks under the limited power, an improved clustering algorithm is proposed in this paper on the basis of LEACH protocol. The energy factor is considered in this algorithm. The residual energy of all sensor nodes is referred to select cluster-heads of wireless sensor networks. The new clustering algorithm effectively improves the energy efficiency, throughput and lifetime of wireless sensor networks. The results are proved by simulations.


Author(s):  
Sangsoon Lim

<span>In battery-based wireless sensor networks, energy-efficient operation is one of the most important factors. Especially, in order to improve energy efficiency in wireless sensor networks, various studies on low power operation have been actively conducted in the MAC layer. In recent years, mutual interference among various radio technologies using the same radio frequency band has become a serious problem. Wi-Fi, ZigBee, and Bluetooth use the same frequency band of 2.4GHz at the same time, which causes various signal interference problems. In this paper, we propose a novel channel reservation scheme, called IACR, to improve the energy efficiency of wireless sensor networks in an environment where interference occurs between various wireless technologies. The proposed scheme inserts a PN code into a long preamble for exchanging transmission status information between a transmitting node and a receiving node, thereby improving the transmission success probability while receiving less influence on transmission of other radio technologies. We performed an event-driven simulation and an experiment to measure the signal detection rate. As a result, it can be seen that the proposed technique reduces the packet drop rate by 15% and increases the discoverable distance of the control packet for channel reservation.</span>


Author(s):  
Nivetha Gopal ◽  
Venkatalakshmi Krishnan

Enhancing the energy efficiency and maximizing the networking lifetime are the major challenges in Wireless Sensor Networks (WSN).Swarm Intelligence based algorithms are very efficient in solving nonlinear design problems with real-world applications.In this paper a Swarm based Fruit Fly Optimization Algorithm (FFOA) with the concept of K-Medoid clustering and swapping is implemented to increase the energy efficiency and lifetime of WSN. A comparative analysis is performed in terms of cluster compactness,cluster error and convergence. MATLAB Simulation results show that K-Medoid Swapping and Bunching Fruit Fly optimization (KMSB-FFOA) outperforms FFOA and K-Medoid Fruit Fly Optimization Algorithm (KM-FFOA).


Sign in / Sign up

Export Citation Format

Share Document