AbstractThe technical rules for connecting turbines to the medium, high or extra-high voltage grid in Germany require the certification of the UVRT characteristics of wind turbines. The state-of-art voltage divider-based test equipment, also named UVRT-Container, is well equipped for executing UVRT tests in field. To conduct the UVRT in field the full wind turbine should be already installed. A second option to perform UVRT tests are system level test benches. They enable the testing of the nacelle. The components that are not actually present, such as the turbine tower or the blades, are emulated via a mechanical hardware in the loop (HiL) system. In this work, for the first time, the performance of two different grid simulators installed at the DyNaLab at Fraunhofer IWES and at the CWD at RWTH Aachen University is compared with a field measurement of the same type of wind turbine. Thus, not only a system test bench measurement is compared to a field measurement. Rather, two system test benches with individual technical approaches are additionally compared with each other. The focus of this work is to investigate the characteristics of the grid simulators within the steady-state range of the UVRT tests to replicate identical fault shapes on the test benches and in the field.
First comparison of the electrical properties of two grid emulators for UVRT test against field measurement