Object Picking Using a Two-Fingered Gripper Measuring the Deformation and Slip Detection Based on a 3-Axis Tactile Sensing

Author(s):  
Satoshi Funabashi ◽  
Yuta Kage ◽  
Hiroyuki Oka ◽  
Yoshihiro Sakamoto ◽  
Shigeki Sugano
2019 ◽  
Vol 297 ◽  
pp. 111512 ◽  
Author(s):  
Yancheng Wang ◽  
Xin Wu ◽  
Deqing Mei ◽  
Lingfeng Zhu ◽  
Jianing Chen

2019 ◽  
Vol 139 (11) ◽  
pp. 375-380
Author(s):  
Harutoshi Takahashi ◽  
Yuta Namba ◽  
Takashi Abe ◽  
Masayuki Sohgawa

2021 ◽  
Vol 13 (11) ◽  
pp. 2078
Author(s):  
Ning Liu ◽  
Qin Zhang ◽  
Shuangcheng Zhang ◽  
Xiaoli Wu

Real-time cycle slip detection and repair is one of the key issues in global positioning system (GPS) high precision data processing and application. In particular, when GPS stations are in special environments, such as strong ionospheric disturbance, sea, and high-voltage transmission line interference, cycle slip detection and repair in low elevation GPS observation data are more complicated than those in normal environments. For low elevation GPS undifferenced carrier phase data in different environments, a combined cycle slip detection algorithm is proposed. This method uses the first-order Gauss–Markov stochastic process to model the pseudorange multipath in the wide-lane phase minus narrow-lane pseudorange observation equation, and establishes the state equation of the wide-lane ambiguity with the pseudorange multipath as a parameter, and it uses the Kalman filter for real-time estimation and detects cycle slips based on statistical hypothesis testing with a predicted residual sequence. Meanwhile, considering there are certain correlations among low elevation, observation epoch interval, and ionospheric delay error, a second-order difference geometry-free combination cycle slip test is constructed that takes into account the elevation. By combining the two methods, real-time cycle slip detection for GPS low elevation satellite undifferenced data is achieved. A cycle slip repair method based on spatial search and objective function minimization criterion is further proposed to determine the correct solution of the cycle slips after they are detected. The whole algorithm is experimentally verified using the static and kinematic measured data of low elevation satellites under four different environments: normal condition, high-voltage transmission lines, dynamic condition in the sea, and ionospheric disturbances. The experimental results show that the algorithm can detect and repair cycle slips accurately for low elevation GPS undifferenced data, the difference between the float solution and the true value for the cycle slip does not exceed 0.5 cycle, and the differences obey the normal distribution overall. At the same time, the wide-lane ambiguity and second-order difference GF combination sequence calculated by the algorithm is smoother, which give further evidence that the algorithm for cycle slip detection and repair is feasible and effective, and has the advantage of being immune to the special observation environments.


2021 ◽  
Vol 101 (3) ◽  
Author(s):  
Korbinian Nottensteiner ◽  
Arne Sachtler ◽  
Alin Albu-Schäffer

AbstractRobotic assembly tasks are typically implemented in static settings in which parts are kept at fixed locations by making use of part holders. Very few works deal with the problem of moving parts in industrial assembly applications. However, having autonomous robots that are able to execute assembly tasks in dynamic environments could lead to more flexible facilities with reduced implementation efforts for individual products. In this paper, we present a general approach towards autonomous robotic assembly that combines visual and intrinsic tactile sensing to continuously track parts within a single Bayesian framework. Based on this, it is possible to implement object-centric assembly skills that are guided by the estimated poses of the parts, including cases where occlusions block the vision system. In particular, we investigate the application of this approach for peg-in-hole assembly. A tilt-and-align strategy is implemented using a Cartesian impedance controller, and combined with an adaptive path executor. Experimental results with multiple part combinations are provided and analyzed in detail.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Wang Peng ◽  
Qingxi Liao ◽  
Han Song

AbstractBased on the related characteristics of optical waveguide and flexible optical materials, a flexible and stretchable optical waveguide structure oriented to tactile perception is proposed. The sensing principle of optical waveguide is based on mechanical deformation caused by output light loss. It overcomes the shortcomings of traditional optical waveguide devices, which are unable to conform to irregular surface. The flexible and stretchable optical waveguide is fabricated with nanoreplica molding method, and it has been applied to the measurement of pressure and strain in the field of tactile sensing. The flexible and stretchable optical waveguide had a strain detection range of 0 to 12.5%, and the external force detection range is from 0 to 23 × 10–3 N.


Sign in / Sign up

Export Citation Format

Share Document