Martian: Message Broadcast via LED Lights to Heterogeneous Smartphones

2017 ◽  
Vol 35 (5) ◽  
pp. 1154-1162 ◽  
Author(s):  
Haohua Du ◽  
Junze Han ◽  
Xuesi Jian ◽  
Taeho Jung ◽  
Cheng Bo ◽  
...  
Keyword(s):  
2011 ◽  
Vol 187 ◽  
pp. 741-745 ◽  
Author(s):  
Juan Hua Zhu ◽  
Ang Wu ◽  
Juan Fang Zhu

A digital clock system designed by using VHDL hardware description language is presented in this paper. The proposed architecture fully utilizes the digital clock system available on FPGA chips based top-down design method in the Quartus II development environment. The Clock system is divided into four design modules: core module, frequency_division module, display module and tune module. It not only can time accurately and display time, but also can reset and adjust time. The LED lights will flash and the loudspeaker will tell time on the hour. The architecture is implemented and verified experimentally on a FPGA board. Because of the universality of digital clock and the portability of VHDL language, it can be applied directly in various designs based on FPGA chip.


Author(s):  
Johnny Verhoeff ◽  
Nambi S.N. Akshay Uttama ◽  
Marco Zuniga Zamalloa ◽  
Bontor Humala

Author(s):  
Min Ki Lee ◽  
◽  
Mariadhas Valan Arasu ◽  
Suhyoung Park ◽  
Dong Hae Byeon ◽  
...  
Keyword(s):  

2018 ◽  
Vol 8 (10) ◽  
pp. 1719 ◽  
Author(s):  
Wenshuai Tan ◽  
Hongxing Wei ◽  
Bo Yang

A new self-assembly modular robot (SMR) SambotII is developed based on SambotI, which is a previously-built hybird type SMR that is capable of autonomous movement and self-assembly. As is known, SambotI only has limited abilities of environmental perception and target recognition, because its STM-32 processor cannot handle heavy work, like image processing and path planning. To improve the computing ability, an x86 dual-core CPU is applied and a hierarchical software architecture with five layers is designed. In addition, to enhance its perception abilities, a laser-camera unit and a LED-camera unit are employed to obtain the distance and angle information, respectively, and the color-changeable LED lights are used to identify different passive docking surfaces during the docking process. Finally, the performances of SambotII are verified by docking experiments.


Author(s):  
Arjamand Khaliq ◽  
Rana Fahad ◽  
Junaid Shafique ◽  
Maryam Iqbal
Keyword(s):  

2018 ◽  
Author(s):  
Melanie U Knopp ◽  
Katherine Binzel ◽  
Chadwick L Wright ◽  
Jun Zhang ◽  
Michael V Knopp

BACKGROUND Conventional approaches to improve the quality of clinical patient imaging studies focus predominantly on updating or replacing imaging equipment; however, it is often not considered that patients can also highly influence the diagnostic quality of clinical imaging studies. Patient-specific artifacts can limit the diagnostic image quality, especially when patients are uncomfortable, anxious, or agitated. Imaging facility or environmental conditions can also influence the patient’s comfort and willingness to participate in diagnostic imaging studies, especially when performed in visually unesthetic, anxiety-inducing, and technology-intensive imaging centers. When given the opportunity to change a single aspect of the environmental or imaging facility experience, patients feel much more in control of the otherwise unfamiliar and uncomfortable setting. Incorporating commercial, easily adaptable, ambient lighting products within clinical imaging environments allows patients to individually customize their environment for a more personalized and comfortable experience. OBJECTIVE The aim of this pilot study was to use a customizable colored light-emitting diode (LED) lighting system within a clinical imaging environment and demonstrate the feasibility and initial findings of enabling healthy subjects to customize the ambient lighting and color. Improving the patient experience within clinical imaging environments with patient-preferred ambient lighting and color may improve overall patient comfort, compliance, and participation in the imaging study and indirectly contribute to improving diagnostic image quality. METHODS We installed consumer-based internet protocol addressable LED lights using the ZigBee standard in different PET/CT scan rooms within a clinical imaging environment. We recruited healthy volunteers (n=35) to generate pilot data in order to develop a subsequent clinical trial. The visual perception assessment procedure utilized questionnaires with preprogrammed light/color settings and further assessed how subjects preferred ambient light and color within a clinical imaging setting. RESULTS Technical implementation using programmable LED lights was performed without any hardware or electrical modifications to the existing clinical imaging environment. Subject testing revealed substantial variabilities in color perception; however, clear trends in subject color preference were noted. In terms of the color hue of the imaging environment, 43% (15/35) found blue and 31% (11/35) found yellow to be the most relaxing. Conversely, 69% (24/35) found red, 17% (6/35) found yellow, and 11% (4/35) found green to be the least relaxing. CONCLUSIONS With the majority of subjects indicating that colored lighting within a clinical imaging environment would contribute to an improved patient experience, we predict that enabling patients to customize environmental factors like lighting and color to individual preferences will improve patient comfort and patient satisfaction. Improved patient comfort in clinical imaging environments may also help to minimize patient-specific imaging artifacts that can otherwise limit diagnostic image quality. CLINICALTRIAL ClinicalTrials.gov NCT03456895; https://clinicaltrials.gov/ct2/show/NCT03456895


2015 ◽  
Vol 19 (6) ◽  
pp. 586-591 ◽  
Author(s):  
Myoung-geun Moon ◽  
Su-il Choi ◽  
Jaehyung Park ◽  
Jin Young Kim

MEDISAINS ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 35
Author(s):  
Runi Pramesti Putri ◽  
Endiyono Endiyono

Background: The success of basic life support is determined by the role of the individual(s) who first encountered a patient with a heart attack, and he will be a helper in the situation. Lack of socialization and training for laypeople makes them unable to implement a right first aid in cases of cardiac arrest. There is a need for innovations in cardiac, pulmonary resuscitation for ordinary people to facilitate them in practicing compression measures.Technique: CPR mannequin is made of a plywood material in the shape of the human body; it is 34 cm long, 34 cm wide, and 6.5 cm high. There are 2 LED lights to detect the accuracy of the compression depth.Conclusion: CPR mannequin can facilitate and improve the skills of laypeople in performing cardiopulmonary resuscitation


Sign in / Sign up

Export Citation Format

Share Document