scholarly journals Applications of photonic crystal fibers in optical communications - What is in the future?

Author(s):  
A. Bjarklev ◽  
Chinlon Lin
2003 ◽  
Vol 797 ◽  
Author(s):  
Satoki Kawanishi ◽  
Takashi Yamamoto ◽  
Hirokazu Kubota ◽  
Masatoshi Tanaka ◽  
Syun-ichiro Yamaguchi

ABSTRACTRecent progress on photonic crystal fibers (PCFs) is reviewed aiming at their application to high performance optical communications sytems. The optical properties, for example dispersion characteristics, can be set by selecting the appropriate combination of air hole diameter and air hole pitch. A noteworthy characteristic of PCFs is their strong birefringence, which suggests optical components with better polarization maintaining characteristics.This paper describes the characteristics of dispersion controlled PCFs and polarization maintaining PCFs. It describes theoretical analyses and experimental results of fabricated PCFs that have short wavelength zero dispersion at 810 nm, polarization maintaining capability with birefringence of 1 × 10−3, polarization maintaining dispersion flattened functions, and absolute single polarization state support with polarization dependent loss of 1 dB/m at 1550 nm. A supercontinuum generation experiment with PM-PCF in the 1550 nm region is shown with symmetrical spectral broadening to over 40 nm. The potential of PCFs will be discussed with reference to the next generation optical communications systems.


2001 ◽  
Author(s):  
Timothy A. Birks ◽  
Jonathan C. Knight ◽  
Brian J. Mangan ◽  
Philip S. Russell

2021 ◽  
Vol 53 (4) ◽  
Author(s):  
Hieu Van Le ◽  
Van Thuy Hoang ◽  
Hue Thi Nguyen ◽  
Van Cao Long ◽  
Ryszard Buczynski ◽  
...  

AbstractThis study proposes a photonic crystal fiber made of fused silica glass, with the core infiltrated with tetrachloroethylene (C2Cl4) as a new source of supercontinuum (SC) spectrum. We studied numerically the guiding properties of the several different fiber structures in terms of characteristic dispersion, mode area, and attenuation of the fundamental mode. Based on the results, the structural geometries of three C2Cl4-core photonic crystal fibers were optimized in order to support the broadband SC generations. The first fiber structure with lattice constant 1.5 μm and filling factor 0.4 operates in all-normal dispersion. The SC with a broadened spectral bandwidth of 0.8–2 μm is generated by a pump pulse with a central wavelength of 1.56 μm, 90 fs duration and energy of 1.5 nJ. The second proposed structure, with lattice constant 4.0 μm and filling factor 0.45, performs an anomalous dispersion for wavelengths longer than 1.55 μm. With the same pump pulse as the first fiber, we obtained the coherence SC spectrum in an anomalous dispersion range with wavelength range from 1 to 2 μm. Meanwhile, the third selected fiber (lattice constant 1.5 μm, filling factor 0.55) has two zero dispersion wavelengths at 1.04 μm and 1.82 μm. The octave-spanning of the SC spectrum formed in this fiber was achieved in the wavelength range of 0.7–2.4 μm with an input pulse whose optical properties are 1.03 μm wavelength, 120 fs duration and energy of 2 nJ. Those fibers would be good candidates for all-fiber SC sources as cost-effective alternatives to glass core fibers.


Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 284
Author(s):  
Bowei Wan ◽  
Lianqing Zhu ◽  
Xin Ma ◽  
Tianshu Li ◽  
Jian Zhang

Due to their flexible structure and excellent optical characteristics hollow-core photonic crystal fibers (HC-PCFs) are used in many fields, such as active optical devices, communications, and optical fiber sensing. In this paper, to analyze the characteristics of HC-PCFs, we carried out finite element analysis and analyzed the design for the band gap cladding structure of HC-PCFs. First, the characteristics of HC19-1550 and HC-1550-02 in the C-band were simulated. Subsequently, the structural optimization of the seven-cell HC-1550-02 and variations in characteristics of the optimized HC-1550-02 in the wavelength range 1250–1850 nm were investigated. The simulation results revealed that the optimal number of cladding layers is eight, the optimal core radius is 1.8 times the spacing of adjacent air holes, and the optimal-relative thickness of the core quartz-ring is 2.0. In addition, the low confinement loss bandwidth of the optimized structure is 225 nm. Under the transmission bandwidth of the optimized structure, the core optical power is above 98%, the confinement loss is below 9.0 × 10−3 dB/m, the variation range of the effective mode field area does not exceed 10 μm2, and the relative sensitivity is above 0.9570. The designed sensor exhibits an ultra-high relative sensitivity and almost zero confinement loss, making it highly suitable for high-sensitivity gas or liquid sensing.


Sign in / Sign up

Export Citation Format

Share Document