Broadband triangle slotted patch antenna for wireless local area network

2003 ◽  
Author(s):  
H.M. Elkamchouchi ◽  
H.E.M. Hafez
Keyword(s):  
Patch Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network

PERANCANGAN ANTENA MIKROSTRIPRECTANGULAR

Jurnal Teknik ◽  
2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Heru Abrianto
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Wireless Lan ◽  
Microstrip Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network ◽  
Dual Polarization ◽  
Feeding Technique

Microstrip antenna which designed with dual feeding at 2.4 GHz and 5.8 GHz can meet WLAN (Wireless Local Area Network) application.Antenna fabrication use PCB FR4 double layer with thickness 1.6 mm and dielectric constant value 4.4. The length of patch antenna according to calculation 28.63 mm, but to get needed parameter length of patch should be optimized to 53 mm. After examination, this antenna has VSWR 1.212 at 2.42 GHz and 1.502 at 5.8 GHz, RL -13.94 dB at 2.42 GHz and -20.357 dB at 5.8 GHz, gain of antenna 6.16 dB at 2.42 GHz and 6.91 dB at 5.8 GHz, the radiation pattern is bidirectional. Keywords : microstrip antenna, wireless LAN, dual polarization, single feeding technique

scholarly journals Trapezoid Shape Patch Antenna for WLAN Application

2019 ◽  
Vol 8 (9S) ◽  
pp. 512-516
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Area Network ◽  
S Parameter

In this paper,CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna andalso to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.

Rhombus-Shaped Cross-Slot and Notched Loaded Microstrip Patch Antenna

2020 ◽  
pp. 102-111
Author(s):  
Gaurav Varma ◽  
Rishabh Kumar Baudh
Keyword(s):  
Patch Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Dielectric Material ◽  
Local Area ◽  
Microstrip Patch Antenna ◽  
Area Network ◽  
Method Of Moment ◽  
Microstrip Patch ◽  
Ring Shape

The aim is to design a Rhombus microstrip patch antenna. The antenna operates at FL=1.447 GHz to FH=2.382 GHz frequency for wireless local area network (WLAN). This antenna operates at f=1.914 GHz resonant frequency. In microstrip patch antenna, many types of shapes like circular, triangular, rectangular, square, ring shape, etc. are used, but in this design a rectangular shape is used. In proposed antenna, the accuracy and efficiency are increased. Integral equation three-dimensional (3D) software (IE3D) is used for the optimize of the rhombus cross-slotted antenna design. The IE3D uses a full wave method of moment simulator. This antenna fabricated on FR4 glass epoxy double-sided copper dielectric material with relative permittivity of ∈ =4.4, thickness h= 1.60mm, and loss tangent is 0.013.

Multi-Band Rectangular Zig-Zag-Shaped Microstrip Patch Antenna for Wireless Applications

2020 ◽  
pp. 66-86
Author(s):  
Pranay Yadav ◽  
Bharat Bhushan Khare ◽  
Sudesh Gupta ◽  
Yash Kumar Kshirsagar ◽  
Swati Jain
Keyword(s):  
Patch Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Research Work ◽  
Local Area ◽  
Area Network ◽  
Fifth Generation ◽  
Communication Devices ◽  
Cut Set ◽  
Multi Band

In the era of fifth generation communication system, multi-band patch antenna is the key element of this system. Most of the wireless communication devices work in the range of 1 to 6 GHz such as wireless fidelity (Wi-Fi), Wi-Max, and wireless local area network. In this research work, a modified zig-zag-shaped multiband patch antenna with cross-cut set that covers 1 to 6 GHz range is designed. Proposed patch antenna shows five different bands at different resonant frequencies 1.4, 2.3, 2.5, 3.42, and 4.16 all in GHz. The proposed zig-zag-shaped patch antenna also calculates the radiation pattern and specific absorption rate (SAR).

scholarly journals Comparison and Performance Evaluation on Microstrip Patch Antenna for WLAN Application

2016 ◽  
Vol 4 (3) ◽  
pp. 80-84
Author(s):  
Meenal Kate ◽  
Anjana Goen
Keyword(s):  
Patch Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Area Network ◽  
Microstrip Patch ◽  
And Performance

This paper present a comparative study between two works proposed for microstrip patch antenna dual band operations. The comparison is made between a dual-band planar antenna with a compact radiator for 2.4/5.2/5.8-GHz Wireless Local Area Network (WLAN) applications and a printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane antenna. The comparative analysis between these two antennas consist of following parameters such as dimensions, bandwidth, gain, return loss, directivity etc.

Sign in / Sign up

Export Citation Format

Share Document