Modeling and Measurement of Radiated EMI for Flyback Converter

2021 ◽  
Author(s):  
Shaohui Xu ◽  
Qingbin Chen ◽  
Xujia Long ◽  
Wei Chen ◽  
Yaodong Chen ◽  
...  
Keyword(s):  
Flyback Converter

scholarly journals Flyback Converter for Solid-State Lighting Applications with Partial Energy Processing

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 60
Author(s):  
Mario Ponce-Silva ◽  
Daniel Salazar-Pérez ◽  
Oscar Miguel Rodríguez-Benítez ◽  
Luis Gerardo Vela-Valdés ◽  
Abraham Claudio-Sánchez ◽  
...  
Keyword(s):  
Solid State ◽  
Power Supply ◽  
Design Methodology ◽  
Low Frequency ◽  
Solid State Lighting ◽  
Voltage Source ◽  
Flyback Converter ◽  
Partial Energy ◽  
In Series ◽  
Energy Processing

The main contribution of this paper is to show a new AC/DC converter based on the rearrangement of the flyback converter. The proposed circuit only manages part of the energy and the rest is delivered directly from the source to the load. Therefore, with the new topology, the efficiency is increased, and the stress of the components is reduced. The rearrangement consist of the secondary of the flyback is placed in parallel with the load, and this arrangement is connected in series with the primary side and the rectified voltage source. The re-arranged flyback is only a reductive topology and with no magnetic isolation. It was studied as a power supply for LEDs. A low frequency averaged analysis (LFAA) was used to determine the behavior of the proposed circuit and an equivalent circuit much easier to analyze was obtained. To validate the theoretical analysis, a design methodology was developed for the re-arranged flyback converter. The designed circuit was implemented in a 10 W prototype. Experimental results showed that the converter has a THDi = 21.7% and a PF = 0.9686.

scholarly journals A Novel Single-Switch Single-Stage LED Driver with Power Factor Correction and Current Balancing Capability

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1340
Author(s):  
Yih-Her Yan ◽  
Hung-Liang Cheng ◽  
Chun-An Cheng ◽  
Yong-Nong Chang ◽  
Zong-Xun Wu
Keyword(s):  
Power Factor ◽  
High Power ◽  
Pulse Width Modulation ◽  
Power Factor Correction ◽  
Harmonic Distortion ◽  
Boost Converter ◽  
Single Stage ◽  
Led Driver ◽  
Flyback Converter ◽  
High Power Factor

A novel single-switch single-stage high power factor LED driver is proposed by integrating a flyback converter, a buck–boost converter and a current balance circuit. Only an active switch and a corresponding control circuit are used. The LED power can be adjusted by the control scheme of pulse–width modulation (PWM). The flyback converter performs the function of power factor correction (PFC), which is operated at discontinuous-current mode (DCM) to achieve unity power factor and low total current harmonic distortion (THDi). The buck–boost converter regulates the dc-link voltage to obtain smooth dc voltage for the LED. The current–balance circuit applies the principle of ampere-second balance of capacitors to obtain equal current in each LED string. The steady-state analyses for different operation modes is provided, and the mathematical equations for designing component parameters are conducted. Finally, a 90-W prototype circuit with three LED strings was built and tested. Experimental results show that the current in each LED string is indeed consistent. High power factor and low THDi can be achieved. LED power is regulated from 100% to 25% rated power. Satisfactory performance has proved the feasibility of this circuit.

Analysis of an Active-Clamp Flyback Converter

2020 ◽  
Author(s):  
Jing-Sheng Wong ◽  
Hung-Chia Wang ◽  
Chih-Wei Lin ◽  
Hao-Yu Xu ◽  
Yan-Ying Su ◽  
...  
Keyword(s):  
Flyback Converter ◽  
Active Clamp

scholarly journals Analysis and Design for Output Voltage Regulation in Constant-on-Time-Controlled Fly-Buck Converter

Electronics ◽  
2021 ◽  
Vol 10 (16) ◽  
pp. 1886
Author(s):  
Younghoon Cho ◽  
Paul Jang
Keyword(s):  
Output Voltage ◽  
Voltage Regulation ◽  
Design Guidelines ◽  
Buck Converter ◽  
Design Guideline ◽  
Analysis And Design ◽  
Flyback Converter ◽  
Auxiliary Power ◽  
Primary Output ◽  
Output Capacitor

Fly-buck converter is a multi-output converter with the structure of a synchronous buck converter structure on the primary side and a flyback converter structure on the secondary side, and can be utilized in various applications due to its many advantages. In terms of control, the primary side of the fly-buck converter has the same structure as a synchronous buck converter, allowing the constant-on-time (COT) control to be applied to the fly-buck converter. However, due to the inherent energy transfer principle, the primary-side output voltage regulation of COT controlled fly-buck converters may be poor, which can deteriorate the overall converter performance. Therefore, the primary output capacitor must be carefully designed to improve the voltage regulation characteristics. In this paper, a theoretical analysis of the output voltage regulation in COT controlled fly-buck converter is conducted, and based on this, a design guideline for the primary output capacitor considering the output voltage regulation is presented. The validity of the analysis and design guidelines was verified using a 5 W prototype of the COT controlled fly-buck converter for telecommunication auxiliary power supply.

Flyback Converter for a Multi-Chemistry Battery Balancer

2021 ◽  
Author(s):  
Bogdan-Adrian Enache ◽  
George-Calin Seritan ◽  
Costin Cepisca ◽  
Sorin-Dan Grigorescu ◽  
Florin-Ciprian Argatu ◽  
...  
Keyword(s):  
Flyback Converter
Sign in / Sign up

Export Citation Format

Share Document