High efficiency 3-phase input quasi-single-stage PFC-DC/DC converter

Author(s):  
Jianping Ying ◽  
Bing Lu ◽  
Jianhong Zeng
Keyword(s):  
Author(s):  
L. S. Pioro ◽  
I. L. Pioro

It is well known that high-level radioactive wastes (HLRAW) are usually vitrified inside electric furnaces. Disadvantages of electric furnaces are their low melting capacity and restrictions on charge preparation. Therefore, a new concept for a high efficiency combined aggregate – submerged combustion melter (SCM)–electric furnace was developed for vitrification of HLRAW. The main idea of this concept is to use the SCM as the primary high-capacity melting unit with direct melt drainage into an electric furnace. The SCM employs a single-stage method for vitrification of HLRAW. The method includes concentration (evaporation), calcination, and vitrification of HLRAW in a single-stage process inside a melting chamber of the SCM. Specific to the melting process is the use of a gas-air or gas-oxygen-air mixture with direct combustion inside a melt. Located inside the melt are high-temperature zones with increased reactivity of the gas phase, the existence of a developed interface surface, and intensive mixing, leading to intensification of the charge melting and vitrification process. The electric furnace clarifies molten glass, thus preparing the high-quality melt for subsequent melt pouring into containers for final storage.


2006 ◽  
Vol 51 (1) ◽  
pp. 99-115 ◽  
Author(s):  
Predrag Vukosavljevic ◽  
Branka Bukvic ◽  
Miodrag Jankovic ◽  
Tanja Petrovic ◽  
Snezana Stevanovic

A change of anthocyanins under different conditions of enzymatic treatments, clarification and concentration was determined. A pectin preparation Klerzyme?120, manufactured by DSM, France, specific for "sour fruits" with pH below 3.2, was used for maceration and depectinization. Experiments were carried out by a laboratory hydraulic press. Raw raspberry juice was clarified either by membranes separation processes or by traditional treatments using gelatin and bentonite. For microfiltration and ultrafiltration processes, membrane cut-off should not be below 30,000 g/mol to prevent any color loss. Experiments with membrane separations processes were carried out with five different membranes. A raw depectinized raspberry juice was clarified by cross-flow microfiltration and ultrafiltration using ceramic tubular membranes and hollow fiber polymeric membranes of a molecular weight cut-off of 300, 50 and 30 kg /mol or with a mean pore size of 0.2 urn in the case of microfiltration. Fruit juice concentrations were carried out by a laboratory equipment for vacuum evaporation. Extraction yield by a laboratory hydraulic press was the same in case of single-stage maceration and two-stage maceration. However, due to a lower viscosity, it was observed that single-stage process provides raspberry juice with more color and high efficiency of extraction. It was noticed that thermal breaks of raspberry pulp provide juice containing more total anthocyanins. The clarification using gelatin and bentonite removed about 50% total anthocyanins, while a clarification by a cross-flow ultrafiltration using Carbosep M9, M8 and M7 membranes achieved the highest level of color loss. Total color loss after concentration was 70%. The best results in color protection were observed by a microfiltration through Kerasep membrane, due to its relatively large pores (0.2?m). .


2020 ◽  
Vol 67 (1) ◽  
pp. 192-202 ◽  
Author(s):  
Mohamed H. Ahmed ◽  
Chao Fei ◽  
Fred C. Lee ◽  
Qiang Li

2019 ◽  
Vol 12 (11) ◽  
pp. 3390-3399 ◽  
Author(s):  
Yunfei Xing ◽  
Ruiheng Liu ◽  
Jinchen Liao ◽  
Qihao Zhang ◽  
Xugui Xia ◽  
...  

Combined high performance of self-propagating synthesized materials and topological structures optimization, half-Heusler single-stage module and half-Heusler/Bi2Te3 segmented module attained record-high conversion efficiencies of 9.6% and 12.4%.


Sign in / Sign up

Export Citation Format

Share Document