Design and Manual Control of a 3 Degrees of Freedom Social Robotic Manipulator

Author(s):  
Pouria Khajehpour ◽  
Esmaeil Najafi
2016 ◽  
Vol 817 ◽  
pp. 150-161 ◽  
Author(s):  
Marcin Szuster ◽  
Piotr Gierlak

The article focuses on the implementation of the globalized dual-heuristic dynamic programming algorithm in the discrete tracking control system of the three degrees of freedom robotic manipulator. The globalized dual-heuristic dynamic programming algorithm is included in the approximate dynamic programming algorithms family, that bases on the Bellman’s dynamic programming idea. These algorithms generally consist of the actor and the critic structures realized in a form of artificial neural networks. Moreover, the control system includes the PD controller, the supervisory term and an additional control signal. The structure of the supervisory term derives from the stability analysis, which was realized using the Lyapunov stability theorem. The control system works on-line and the neural networks’ weight adaptation process is realized in every iteration step. A series of computer simulations was realized in Matlab/Simulink software to confirm performance of the control system.


2020 ◽  
Author(s):  
Sebastijan Veselic ◽  
Claudio Zito ◽  
Dario Farina

Designing robotic assistance devices for manipulation tasks is challenging. This work aims at improving accuracy and usability of physical human-robot interaction (pHRI) where a user interacts with a physical robotic device (e.g., a human operated manipulator or exoskeleton) by transmitting signals which need to be interpreted by the machine. Typically these signals are used as an open-loop control, but this approach has several limitations such as low take-up and high cognitive burden for the user. In contrast, a control framework is proposed that can respond robustly and efficiently to intentions of a user by reacting proactively to their commands. The key insight is to include context- and user-awareness in the controller, improving decision making on how to assist the user. Context-awareness is achieved by creating a set of candidate grasp targets and reach-to grasp trajectories in a cluttered scene. User-awareness is implemented as a linear time-variant feedback controller (TV-LQR) over the generated trajectories to facilitate the motion towards the most likely intention of a user. The system also dynamically recovers from incorrect predictions. Experimental results in a virtual environment of two degrees of freedom control show the capability of this approach to outperform manual control. By robustly predicting the user’s intention, the proposed controller allows the subject to achieve superhuman performance in terms of accuracy and thereby usability.


Author(s):  
H. Abbas ◽  
S. M. Hashemi ◽  
H. Werner

In this paper, low-complexity linear parameter-varying (LPV) modeling and control of a two-degrees-of-freedom robotic manipulator is considered. A quasi-LPV model is derived and simplified in order to facilitate LPV controller synthesis. An LPV gain-scheduled, decentralized PD controller in linear fractional transformation form is designed, using mixed sensitivity loop shaping to take — in addition to high tracking performance — noise and disturbance rejection into account, which are not considered in model-based inverse dynamics or computed torque control schemes. The controller design is based on the existence of a parameter-dependent Lyapunov function — employing the concept of quadratic separators — thus reducing the conservatism of design. The resulting bilinear matrix inequality (BMI) problem is solved using a hybrid gradient-LMI technique. Experimental results illustrate that the LPV controller clearly outperforms a decentralized LTI-PD controller and achieves almost the same accuracy as a model-based inverse dynamics and a full-order LPV controllers in terms of tracking performance while being of significantly lower complexity.


Author(s):  
Haitao Liu ◽  
Tie Zhang

Sliding mode control is a very attractive control scheme with strong robustness to structured and unstructured uncertainties as well as to external disturbances. In this paper, a robust fuzzy sliding mode controller, which is combined with an adaptive fuzzy logic system, is proposed to improve the control performance of the robotic manipulator with kinematic and dynamic uncertainties. In this controller, the sliding mode control is employed to improve the control accuracy and the robustness of the robotic manipulator, and the fuzzy logic control is adopted to approximate various uncertainties and to eliminate the chattering without the help of any prior knowledge of system uncertainties. The effectiveness of the proposed controller is then verified by the simulations on a 2-DOF (degrees of freedom) robotic manipulator and the experiments on an SCARA robot with four degrees of freedom. Simulated and experimental results indicate that the proposed controller is effective in the robust tracking of the robotic manipulator with kinematic and dynamic uncertainties.


Author(s):  
Mateus Cabral dos Santos ◽  
Rodrigo Henrique Cunha Palácios ◽  
Márcio Mendonça ◽  
José Augusto Fabri ◽  
Wagner Fontes Godoy

1991 ◽  
Vol 3 (5) ◽  
pp. 394-400 ◽  
Author(s):  
Hideki Hashimoto ◽  
◽  
Takashi Kubota ◽  
Motoo Sato ◽  
Fumio Harashima ◽  
...  

This paper describes a control scheme for a robotic manipulator system which uses visual information to position and orientate the end-effector. In the scheme the position and the orientation of the target workpiece with respect to the base frame of the robot are assumed to be unknown, but the desired relative position and orientation of the end-effector to the target workpiece are given in advance. The control system directly integrates visual data into the servoing process without subdividing the process into determination of the position, orientation of the workpiece and inverse kinematic calculation. An artificial neural network system is used for determining the change in joint angles required in order to achieve the desired position and orientaion. The proposed system can control the robot so that it approach the desired position and orientaion from arbitary initial ones. Simulation for the robotic manipulator with six degrees of freedom is done. The validity and the effectiveness of the proposed control scheme are varified by computer simulations.


2019 ◽  
Vol 9 (10) ◽  
pp. 2023 ◽  
Author(s):  
Hoai-Vu-Anh Truong ◽  
Duc-Thien Tran ◽  
Kyoung Kwan Ahn

The manipulator, in most cases, works in unstructured and changeable conditions. With large external variations, the demand for stability and robustness must be ensured. This paper proposes a neural network sliding mode control (NNSMC) to cope with uncertainties and improve the behavior of the robotic manipulator in the presence of an external disturbance. The proposed method is applied to the three degrees of freedom (DOF) manipulator. Some comparisons between the proposed and the conventional algorithms are given in both simulation and experiments to prove that the designed control can achieve higher accuracy in tracking motion.


Sign in / Sign up

Export Citation Format

Share Document