Mechatronics Design and Kinematic Analysis of Mecanum Wheeled Mobile Robot for Covid-19 Disinfection with UV Rays applied on Indoor Environments

Author(s):  
Andy M. Reque ◽  
Edwin F. Garay ◽  
Jose Cornejo ◽  
Ricardo Palomares
2014 ◽  
Vol 532 ◽  
pp. 170-174 ◽  
Author(s):  
Fang Liu ◽  
Chang Qing Shen ◽  
Yong Bin Liu ◽  
Fan Rang Kong

This paper depicts the system design of a basketball-playing robot named BPR. BPR is a wheeled mobile robot equipped with a 3-DOF manipulator and a mechanical claw. The robot can grasp one basketball and then dunk under the players remote control. In this paper, the hardware design including the mechanical structure and the electrical system are introduced firstly. Then, the kinematic analysis of the manipulator is proposed to decide the manipulators posture control. Finally, simulation of the manipulator is implemented in ADAMS to verify the design efficiency of posture planning. BPR has been exhibited in a science museum in China and it is well welcomed by the audiences.


Author(s):  
Kiwon Sohn ◽  
Aurian Emami ◽  
Jaesung Yang

Abstract This paper presents the development of mobile transportation robot, i-Explore which has been designed and built by ART (Assistive Robot Team) in University of Hartford since 2018. The main objective of i-Explore is to assist and carry children who have severe physical disabilities in indoor environments, especially for domestic uses. In this paper, the mechanical design and building processes of i-Explore which focused on fast reactiveness and low-cost manufacturing as its main technical design requirements are described first. Then, the kinematic analysis and its implementation in the low-level body controller of the mobile robot are described. Lastly, i-Explore is tested and evaluated both in cleaned and cluttered works spaces with its semi-autonomous motions which are designed for the robot’s navigation in human centered environments.


Author(s):  
Roman Chertovskih ◽  
Anna Daryina ◽  
Askhat Diveev ◽  
Dmitry Karamzin ◽  
Fernando L. Pereira ◽  
...  

2016 ◽  
Vol 9 (3) ◽  
pp. 215-221
Author(s):  
Junpeng Shao ◽  
Tianhua He ◽  
Jingang Jiang ◽  
Yongde Zhang

2021 ◽  
pp. 107754632199918
Author(s):  
Rongrong Yu ◽  
Shuhui Ding ◽  
Heqiang Tian ◽  
Ye-Hwa Chen

The dynamic modeling and trajectory tracking control of a mobile robot is handled by a hierarchical constraint approach in this study. When the wheeled mobile robot with complex generalized coordinates has structural constraints and motion constraints, the number of constraints is large and the properties of them are different. Therefore, it is difficult to get the dynamic model and trajectory tracking control force of the wheeled mobile robot at the same time. To solve the aforementioned problem, a creative hierarchical constraint approach based on the Udwadia–Kalaba theory is proposed. In this approach, constraints are classified into two levels, structural constraints are the first level and motion constraints are the second level. In the second level constraint, arbitrary initial conditions may cause the trajectory to diverge. Thus, we propose the asymptotic convergence criterion to deal with it. Then, the analytical dynamic equation and trajectory tracking control force of the wheeled mobile robot can be obtained simultaneously. To verify the effectiveness and accuracy of this methodology, a numerical simulation of a three-wheeled mobile robot is carried out.


Sign in / Sign up

Export Citation Format

Share Document