A computationally efficient technique to extract diffused profiles and three dimensional collector resistances of high energy implanted bipolar devices

2002 ◽  
Author(s):  
S. Chaudhry ◽  
Y.F. Chyan ◽  
M.S. Carroll ◽  
A.S. Chen ◽  
W.J. Nagy ◽  
...  
Keyword(s):  
Three Dimensional ◽  
High Energy ◽  
Efficient Technique ◽  
Computationally Efficient ◽  
Bipolar Devices

scholarly journals POSSIBILITY OF FORMING A LARGE DCC IN ULTRA-RELATIVISTIC HEAVY-ION COLLISIONS

2000 ◽  
Vol 15 (15) ◽  
pp. 2269-2288
Author(s):  
SANATAN DIGAL ◽  
RAJARSHI RAY ◽  
SUPRATIM SENGUPTA ◽  
AJIT M. SRIVASTAVA
Keyword(s):  
Three Dimensional ◽  
Thermal Fluctuations ◽  
Heavy Ion ◽  
High Energy ◽  
Chiral Condensate ◽  
Relativistic Heavy Ion Collisions ◽  
Maximum Temperature ◽  
Chiral Field ◽  
Heavy Nuclei ◽  
True Vacuum

We demonstrate the possibility of forming a single, large domain of disoriented chiral condensate (DCC) in a heavy-ion collision. In our scenario, rapid initial heating of the parton system provides a driving force for the chiral field, moving it away from the true vacuum and forcing it to go to the opposite point on the vacuum manifold. This converts the entire hot region into a single DCC domain. Subsequent rolling down of the chiral field to its true vacuum will then lead to emission of a large number of (approximately) coherent pions. The requirement of suppression of thermal fluctuations to maintain the (approximate) coherence of such a large DCC domain, favors three-dimensional expansion of the plasma over the longitudinal expansion even at very early stages of evolution. This also constrains the maximum temperature of the system to lie within a window. We roughly estimate this window to be about 200–400 MeV. These results lead us to predict that extremely high energy collisions of very small nuclei (possibly hadrons) are better suited for observing signatures of a large DCC. Another possibility is to focus on peripheral collisions of heavy nuclei.

Propagation of cosmic rays and their secondaries in the intracluster medium

2020 ◽  
Vol 15 (S359) ◽  
pp. 178-179
Author(s):  
Saqib Hussain ◽  
Rafael Alves Batista ◽  
Elisabete Maria de Gouveia Dal Pino ◽  
Klaus Dolag
Keyword(s):  
Cosmic Rays ◽  
Gamma Rays ◽  
Intergalactic Medium ◽  
Three Dimensional ◽  
High Energy ◽  
Intracluster Medium ◽  
High Energy Cosmic Rays ◽  
Test Particles

AbstractWe present results of the propagation of high-energy cosmic rays (CRs) and their secondaries in the intracluster medium (ICM). To this end, we employ three-dimensional cosmological magnetohydrodynamical simulations of the turbulent intergalactic medium to explore the propagation of CRs with energies between 1014 and 1019 eV. We study the interaction of test particles with this environment considering all relevant electromagnetic, photohadronic, photonuclear, and hadronuclear processes. Finally, we discuss the consequences of the confinement of high-energy CRs in clusters for the production of gamma rays and neutrinos.

Molecular Dynamics Simulations of High Energy Cascades in Iron

1994 ◽  
Vol 373 ◽  
Author(s):  
Roger E. Stoller
Keyword(s):  
Molecular Dynamics ◽  
Three Dimensional ◽  
High Energy ◽  
Dynamics Simulation ◽  
Method Of Molecular Dynamics ◽  
Energy Cascades ◽  
Iron Based ◽  
The Many ◽  
Property Changes ◽  
Dynamics Simulations

AbstractA series of high-energy, up to 20 keV, displacement cascades in iron have been investigated for times up to 200 ps at 100 K using the method of molecular dynamics simulation. Thesimulations were carried out using the MOLDY code and a modified version of the many-bodyinteratomic potential developed by Finnis and Sinclair. The paper focuses on those results obtained at the highest energies, 10 and 20 keV. The results indicate that the fraction of the Frenkel pairs surviving in-cascade recombination remains fairly high in iron and that the fraction of the surviving point defects that cluster is lower than in materials such as copper. In particular, vacancy clustering appears to be inhibited in iron. Some of the interstitial clusters were observed to exhibit an unexpectedly complex, three-dimensional morphology. The observations are discussed in terms of their relevance to microstructural evolution and mechanical property changes in irradiated iron-based alloys.

Direct simulation of evolution and control of three-dimensional instabilities in attachment-line boundary layers

1995 ◽  
Vol 291 ◽  
pp. 369-392 ◽  
Author(s):  
Ronald D. Joslin
Keyword(s):  
Boundary Layer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Plate Boundary ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Computationally Efficient ◽  
Simulation Results ◽  
Dimensional Simulation ◽  
Attachment Line

The spatial evolution of three-dimensional disturbances in an attachment-line boundary layer is computed by direct numerical simulation of the unsteady, incompressible Navier–Stokes equations. Disturbances are introduced into the boundary layer by harmonic sources that involve unsteady suction and blowing through the wall. Various harmonic-source generators are implemented on or near the attachment line, and the disturbance evolutions are compared. Previous two-dimensional simulation results and nonparallel theory are compared with the present results. The three-dimensional simulation results for disturbances with quasi-two-dimensional features indicate growth rates of only a few percent larger than pure two-dimensional results; however, the results are close enough to enable the use of the more computationally efficient, two-dimensional approach. However, true three-dimensional disturbances are more likely in practice and are more stable than two-dimensional disturbances. Disturbances generated off (but near) the attachment line spread both away from and toward the attachment line as they evolve. The evolution pattern is comparable to wave packets in flat-plate boundary-layer flows. Suction stabilizes the quasi-two-dimensional attachment-line instabilities, and blowing destabilizes these instabilities; these results qualitatively agree with the theory. Furthermore, suction stabilizes the disturbances that develop off the attachment line. Clearly, disturbances that are generated near the attachment line can supply energy to attachment-line instabilities, but suction can be used to stabilize these instabilities.

Epitaxial Ni nanoparticles on CaF2(001), (110) and (111) surfaces studied by three-dimensional RHEED, GIXD and GISAXS reciprocal-space mapping techniques

2017 ◽  
Vol 50 (3) ◽  
pp. 830-839 ◽  
Author(s):  
S. M. Suturin ◽  
V. V. Fedorov ◽  
A. M. Korovin ◽  
N. S. Sokolov ◽  
A. V. Nashchekin ◽  
...  
Keyword(s):  
Lattice Structure ◽  
Three Dimensional ◽  
Grazing Incidence ◽  
High Energy ◽  
Reciprocal Space ◽  
Mapping Technique ◽  
Face Centered Cubic ◽  
X Ray ◽  
Cubic Lattice ◽  
Face Centered

The development of growth techniques aimed at the fabrication of nanoscale heterostructures with layers of ferroic 3dmetals on semiconductor substrates is very important for their potential usage in magnetic media recording applications. A structural study is presented of single-crystal nickel island ensembles grown epitaxially on top of CaF2/Si insulator-on-semiconductor heteroepitaxial substrates with (111), (110) and (001) fluorite surface orientations. The CaF2buffer layer in the studied multilayer system prevents the formation of nickel silicide, guides the nucleation of nickel islands and serves as an insulating layer in a potential tunneling spin injection device. The present study, employing both direct-space and reciprocal-space techniques, is a continuation of earlier research on ferromagnetic 3dtransition metals grown epitaxially on non-magnetic and magnetically ordered fluorides. It is demonstrated that arrays of stand-alone faceted nickel islands with a face-centered cubic lattice can be grown controllably on CaF2surfaces of (111), (110) and (001) orientations. The proposed two-stage nickel growth technique employs deposition of a thin seeding layer at low temperature followed by formation of the islands at high temperature. The application of an advanced three-dimensional mapping technique exploiting reflection high-energy electron diffraction (RHEED) has proved that the nickel islands tend to inherit the lattice orientation of the underlying fluorite layer, though they exhibit a certain amount of {111} twinning. As shown by scanning electron microscopy, grazing-incidence X-ray diffraction (GIXD) and grazing-incidence small-angle X-ray scattering (GISAXS), the islands are of similar shape, being faceted with {111} and {100} planes. The results obtained are compared with those from earlier studies of Co/CaF2epitaxial nanoparticles, with special attention paid to the peculiarities related to the differences in lattice structure of the deposited metals: the dual-phase hexagonal close-packed/face-centered cubic lattice structure of cobalt as opposed to the single-phase face-centered cubic lattice structure of nickel.

Sign in / Sign up

Export Citation Format

Share Document