<p>Recently, the GNSS-A (Global Navigation Satellite System &#8211; Acoustic combination technique) seafloor geodetic observation technology, developed in the Hydrographic and Oceanographic department in Japan Coast Guard (JCG), was upgraded to be able to monitor a subseafloor interplate coupling condition of about 1 cm/year and an interplate shallow slow slip event of about 5 cm (e.g., Yokota et al., 2018, Scientific Data; Ishikawa et al., 2020, Front. Ear. Sci.). By observing such small-scale seafloor crustal movements, GNSS-A technology makes a decisive contribution to subduction seismology and disaster prevention sciences (e.g., Yokota et al., 2016, Nature; Yokota and Ishikawa, 2020, Sci. Adv.). This technology was achieved by connecting high-precision underwater acoustic ranging technology and high-rate GNSS on a vessel at sea surface.</p><p>The GNSS-A, which is carried out all over the world, especially in the Pacific Rim, has been constructed for observation of plate boundary subduction processes and fault movement processes. Unlike the GNSS network, GNSS-A has never contributed to global geodesy within the framework of the Global Geodetic Observing System (GGOS). However, it can be a unique observation method for the construction of the International Terrestrial Reference Frame (ITRF). It can make an important contribution in determining the movement and Euler pole on an oceanic plate that have few land area.</p><p>In the future, if an extensive seafloor geodetic observation network as shown by Kato et al. (2018, JDR) will be established, there is a possibility of constructing a next-generation reference frame that completely explains the plate motion on the earth's surface. This presentation will present the current state of the GNSS-A ability and cost and future prospects for the contribution to global geodesy.</p>
Crustal Deformation Detection Capability Associated With a Fault Slip on the Interplate Boundary in the Gnss-a Seafloor Geodetic Observation Array (SGO-A), Provided By Japan Coast Guard
