scholarly journals Crustal Deformation Detection Capability Associated With a Fault Slip on the Interplate Boundary in the Gnss-a Seafloor Geodetic Observation Array (SGO-A), Provided By Japan Coast Guard

2021 ◽  
Author(s):  
Yusuke Yokota ◽  
Tadashi Ishikawa ◽  
Sun-ichi Watanabe ◽  
Yuto Nakamura
Keyword(s):  
Standard Deviation ◽  
Crustal Deformation ◽  
Deformation Rate ◽  
Coast Guard ◽  
Detection Sensitivity ◽  
Japan Trench ◽  
Detection Capability ◽  
Geodetic Observation ◽  
Seafloor Geodetic Observation ◽  
Slip Event

Abstract The GNSS-A technique is an observation method that can detect seafloor crustal deformations with centimeter level accuracy. The GNSS-A seafloor geodetic observation array operated by the Japan Coast Guard, called SGO-A, has been constructed near the Japan Islands along the Nankai Trough and the Japan Trench. This observation array has detected several earthquakes’ displacements and episodic slow crustal deformation. To compare the detection results of SGO-A with other observation networks and expand the SGO-A distribution, it is necessary to correctly understand its detection capability. In this paper, the capabilities of current GNSS-A (frequency: f = 4–6 times/year, position accuracy: σ (standard deviation) = 1.5 cm) to detect a crustal deformation rate only, an event only, and crustal deformation rate and event together were arranged by numerical simulations. Results suggested the following features: when it is known that there is no event, the 95% confidence level (CL) for the estimation of crustal deformation rate with 4-year observation is about 0.5–0.8 cm/year; when the deformation rate is known, a signal of about 3.0 cm can be detected by observations of about 4 times before and after the event. When the deformation rate and the event are detected together, to keep the false positive low (about 0.05), the false negative becomes high (about 0.2–0.7 for detecting a signal of 4.5–6.0 cm). The determined rate and event variations are approximately 1.8 cm/year (95%CL) and 1.5 cm (standard deviation), respectively. We also examined the detection capability for higher frequency and accuracy, to examine how the detection capability improves by technological advancements in the future. Additionally, we calculated the spatial range of event detectability using the determined values of detection sensitivity. Each seafloor site can detect a slip event larger than 0.1 m scale within about 50 km radius. A subseafloor slip event smaller than about 1 m at the distance of 100 km or more from the land can often be detected only on the seafloor observation array.

scholarly journals Crustal deformation detection capability of the GNSS-A seafloor geodetic observation array (SGO-A), provided by Japan Coast Guard

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yusuke Yokota ◽  
Tadashi Ishikawa ◽  
Shun-ichi Watanabe ◽  
Yuto Nakamura
Keyword(s):  
Standard Deviation ◽  
Crustal Deformation ◽  
Deformation Rate ◽  
Nankai Trough ◽  
Coast Guard ◽  
Detection Capability ◽  
Positioning Accuracy ◽  
Transient Event ◽  
Seafloor Geodetic Observation ◽  
Slip Event

AbstractThe GNSS-A technique is an observation method that can detect seafloor crustal deformations with centimeter-level positioning accuracy. The GNSS-A seafloor geodetic observation array operated by the Japan Coast Guard (SGO-A) has been constructed near the Japanese Islands along the Nankai Trough and the Japan Trench. This observation array has detected several earthquakes’ displacements and episodic slow crustal deformation. To compare the detection results of SGO-A with other observation networks and expand the SGO-A coverage area, it is necessary to correctly understand its detection capability. In this paper, numerical simulations and statistical verifications were used to assess the capabilities of the present GNSS-A system using a manned vessel (observation frequency: 4–6 times/year, positioning accuracy: standard deviation = 1.5 cm) to detect (1) secular deformation only, (2) a transient slip event only and (3) secular deformation and a transient event together. We verified these results with appropriate thresholds and found the following features: When it is known that there is no transient event, the 95% confidence level (CL) for the estimation of secular crustal deformation rate with 4-year observation is about 0.5–0.8 cm/year; when the deformation rate is known, a signal of about 3.0 cm can be detected by observations of about 4 times before and after the transient event. When the deformation rate and the transient event are detected together, to keep the false positive low (about 0.05), the false negative becomes high (about 0.7–0.2 for detecting a signal of 4.5–6.0 cm). The determined rate and event variations are approximately 1.8 cm/year (95%CL) and 1.5 cm (standard deviation), respectively. We also examined the detection capability for higher observation frequency and positioning accuracy, to examine how the detection capability improves by technological advancements in the future. Additionally, we calculated the spatial range of event detectability using the determined values of detection sensitivity. Obtained results show that each seafloor site can detect a slip event of < 1.0 m scale within about 30 km radius, and approximately one-third of the subseafloor slip event over 100 km from land along the Nankai Trough can only be detected by SGO-A.

GNSS-A seafloor geodetic observation capability in 2021 and its applicability to global geodesy

2021 ◽  
Author(s):  
Yusuke Yokota ◽  
Tadashi Ishikawa ◽  
Shun-ichi Watanabe ◽  
Yuto Nakamura
Keyword(s):  
Reference Frame ◽  
Scientific Data ◽  
Coast Guard ◽  
High Rate ◽  
Plate Motion ◽  
Small Scale ◽  
Coupling Condition ◽  
Geodetic Observation ◽  
Seafloor Geodetic Observation ◽  
Euler Pole

&lt;p&gt;Recently, the GNSS-A (Global Navigation Satellite System &amp;#8211; Acoustic combination technique) seafloor geodetic observation technology, developed in the Hydrographic and Oceanographic department in Japan Coast Guard (JCG), was upgraded to be able to monitor a subseafloor interplate coupling condition of about 1 cm/year and an interplate shallow slow slip event of about 5 cm (e.g., Yokota et al., 2018, Scientific Data; Ishikawa et al., 2020, Front. Ear. Sci.). By observing such small-scale seafloor crustal movements, GNSS-A technology makes a decisive contribution to subduction seismology and disaster prevention sciences (e.g., Yokota et al., 2016, Nature; Yokota and Ishikawa, 2020, Sci. Adv.). This technology was achieved by connecting high-precision underwater acoustic ranging technology and high-rate GNSS on a vessel at sea surface.&lt;/p&gt;&lt;p&gt;The GNSS-A, which is carried out all over the world, especially in the Pacific Rim, has been constructed for observation of plate boundary subduction processes and fault movement processes. Unlike the GNSS network, GNSS-A has never contributed to global geodesy within the framework of the Global Geodetic Observing System (GGOS). However, it can be a unique observation method for the construction of the International Terrestrial Reference Frame (ITRF). It can make an important contribution in determining the movement and Euler pole on an oceanic plate that have few land area.&lt;/p&gt;&lt;p&gt;In the future, if an extensive seafloor geodetic observation network as shown by Kato et al. (2018, JDR) will be established, there is a possibility of constructing a next-generation reference frame that completely explains the plate motion on the earth's surface. This presentation will present the current state of the GNSS-A ability and cost and future prospects for the contribution to global geodesy.&lt;/p&gt;

scholarly journals GNSS-Acoustic Observations of Seafloor Crustal Deformation Using a Wave Glider

2021 ◽  
Vol 9 ◽  
Author(s):  
Takeshi Iinuma ◽  
Motoyuki Kido ◽  
Yusaku Ohta ◽  
Tatsuya Fukuda ◽  
Fumiaki Tomita ◽  
...  
Keyword(s):  
Data Acquisition ◽  
Crustal Deformation ◽  
Satellite Communication ◽  
Satellite System ◽  
Japan Trench ◽  
Research Vessel ◽  
Solar Panels ◽  
Wave Glider ◽  
Human Costs ◽  
Global Navigation Satellite

Crustal deformation of the seafloor is difficult to observe solely using global navigation satellite system (GNSS). The GNSS-acoustic (GNSS-A) technique was developed to observe seafloor crustal deformation, and it has produced a steady series of successful observations with remarkable results related to crustal deformation associated with huge earthquakes around the Japanese Islands. However, utilizing GNSS-A incurs very large financial and human costs as it requires the use of a research vessel as a surface platform and has a limited observation frequency, which is less than once a year at seafloor stations along the Japan Trench. To conduct frequent observations, an automatic GNSS-A data acquisition system was developed that operates via an unmanned surface vehicle (wave glider). The first observations using this system were performed at a seafloor station off Aomori Prefecture in July 2019. The wave glider was equipped with two GNSS antennas, an acoustic transducer, a microelectromechanical system gyroscope, and associated control and logging units. Data acquisition and autonomous activation of the seafloor stations were successfully executed by controlling the power supply to the payload via satellite communication with the wave glider. The glider rarely strayed off the configured course and the solar panels generated sufficient power to perform the observations although the weather was mostly cloudy. The GNSS-A data processing results show that the position of the station was determined with the same accuracy and precision as in previous observations performed using a research vessel.

scholarly journals Detection of antibacterial residues in milk by HPLC-DAD and microbial inhibitor tests

2020 ◽  
Vol 38 (No. 1) ◽  
pp. 63-71
Author(s):  
Sofia Christoforidou ◽  
Eftychia Karageorgou ◽  
Maria Ioannidou ◽  
Evdoxios Psomas ◽  
Martha Maggira ◽  
...  
Keyword(s):  
Raw Milk ◽  
Hplc Method ◽  
Detection Sensitivity ◽  
Detection Capability ◽  
Milk Samples ◽  
Sheep Milk ◽  
Microbial Inhibition ◽  
Maximum Residue Levels ◽  
Array Detection ◽  
Residue Levels

The objective of this study was to assess the detection sensitivity of four commercial microbial inhibition assays (MIAs) in comparison with the results by High Pressure Liquid Chromatography with Diode Array Detection (HPLC-DAD) for residues of three tetracyclines, trimethoprim and sulfadiazine in fortified raw milk samples. MIAs showed fairly good results at detecting sulfadiazine residues, whereas concerning tetracyclines and trimethoprim residues, most of the kits showed insufficient results. HPLC analysis revealed high recoveries of examined compounds with detection limits below their respective maximum residue levels (MRLs). The HPLC method was validated determining linearity, accuracy, precision, detection capability and decision limit. Subsequently, both methods were used to monitor several cow and sheep milk samples for the presence of antibacterial agents. Results obtained showed that MIAs could be successfully used for the analysis of different milk types. However, milk spoilage which was observed in some cases could decrease the sensitivity of the kits, a fact that does not seem to influence the effectiveness of HPLC-DAD method.<br /><br />

scholarly journals Heterogeneous interplate coupling along the Nankai Trough, Japan, detected by GPS-acoustic seafloor geodetic observation

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Yusuke Yokota ◽  
Tadashi Ishikawa ◽  
Mariko Sato ◽  
Shun-ichi Watanabe ◽  
Hiroaki Saito ◽  
...  
Keyword(s):  
Nankai Trough ◽  
Geodetic Observation ◽  
Seafloor Geodetic Observation ◽  
Interplate Coupling
Sign in / Sign up

Export Citation Format

Share Document