Study of particle resuspension from dusty surfaces using a centrifugal method

Indoor Air ◽  
2019 ◽  
Vol 29 (5) ◽  
pp. 791-802 ◽  
Author(s):  
Hau Him Lee ◽  
Yung Shan Cheung ◽  
Sau Chung Fu ◽  
Christopher Y. H. Chao
2000 ◽  
Author(s):  
S. Azadi ◽  
A. Afshari ◽  
D. Frazer

Author(s):  
Iman Goldasteh ◽  
Goodarz Ahmadi ◽  
Andrea Ferro

Particle resuspension is an important source of particulate matter in indoor environments that significantly affects the indoor air quality and could potentially have adverse effect on human health. Earlier efforts to investigate indoor particle resuspension hypothesized that high speed airflow generated at the floor level during the gate cycle is the main cause of particle resuspension. The resuspended particles are then assumed to be dispersed by the airflow in the room, which is impacted by both the ventilation and the occupant movement, leading to increased PM concentration. In this study, a three dimensional model of a room was developed using FLUENT™ CFD package. A RANS approach with the RNG k-ε turbulence model was used for simulating the airflow field in the room for different ventilation conditions. The trajectories of resuspended particulate matter were computed with a Lagrangian method by solving the equations of particle motion. The effect of turbulent dispersion was included with the use of the eddy lifetime model. The resuspension of particles due to gait cycle was estimated and included in the computational model. The dispersion and transport of particles resuspended from flooring as well as particle re-deposition on flooring and walls were simulated. Particle concentrations in the room generated by the resuspension process were evaluated and the results were compared with experimental chamber study data as well as simplified model predictions, and good agreement was found.


2013 ◽  
Vol 47 (2) ◽  
pp. 208-217 ◽  
Author(s):  
Yoshihiro Kubota ◽  
Hiroshi Higuchi

2015 ◽  
Vol 79 ◽  
pp. 126-139 ◽  
Author(s):  
J.G. Benito ◽  
K.A.Valenzuela Aracena ◽  
R.O. Uñac ◽  
A.M. Vidales ◽  
I. Ippolito

Author(s):  
Anna-Karin Dahlberg ◽  
Anna Apler ◽  
Paul Frogner-Kockum ◽  
Gunnel Göransson ◽  
Ian Snowball ◽  
...  

Abstract Purpose Numerous sites contaminated with fiber emissions from pulp and paper industries are found in coastal areas of the Baltic Sea, but there is limited knowledge about the magnitude of dispersal of persistent organic pollutants (POPs) from these anthropogenic, organic-rich sediments called fiberbanks. The aim of this study was to quantify and compare different POP dispersal pathways from such fiberbanks. Dispersal mechanisms studied included abiotic and biotic routes (dissolved in water, particle-bound, and bioaccumulation). Materials and methods Contaminated fibrous sediments located in Ångermanälven River estuary in north-eastern Sweden were studied in sediment types representing different fiber content (i.e., fiberbanks, fiber-rich sediments, and less fiber impacted sediments). Sediment-to-water fluxes of dissolved contaminants (polychlorinated biphenyls (PCBs), hexachlorobenzene (HCB), and dichlorodiphenyltrichloroethane (DDT)) were measured in situ using benthic flux chambers. Particle resuspension was measured by sampling bottom water, before and after disturbing the sediment surface. Benthic biota was collected to determine the body burden of contaminants and to determine biota-pore water accumulation factors (BAFPW) and biota-sediment accumulation factors (BSAFs). In addition, concentrations of dissolved POPs in the water column were measured in field using passive samplers. Instrumental analysis was performed using gas chromatography coupled to a triple quadrupole mass spectrometer (GC-MS/MS). Results and discussion The flux of dissolved Σ20PCBs was approximately two times higher from one of the investigated fiberbanks (3.4 ng m− 2 day− 1) compared to the other. The average particle burden of PCBs was also higher at this fiberbank after artificial disturbance (15 ng g−1 particle), which indicates that larger amounts of contaminants are likely to disperse via particle resuspension from this site compared to the other fiberbank (4.8 ng g− 1 particle). The difference might be associated with a layer of recently settled minerogenic material that covers one of the fiberbanks, which probably functions as a protective barrier. The lack of benthic biota implies that contaminant release by bioturbation is negligible in the studied fiberbanks. However, benthic biota from fiber-rich sediment showed bioaccumulation and biomagnification of contaminants. Conclusions The importance of diffusive flux from fiberbanks under undisturbed conditions became apparent when the different dispersal pathways were quantified. However, no dispersal pathway could be judged as irrelevant, since even under undisturbed conditions, advective particle transport was significant. Additionally, the uptake by biota and trophic transfer can be considerable. Quantification of dispersal routes and understanding of the relative importance of various pathways is critical for proper risk assessment and management of contaminated sediments.


1978 ◽  
Vol 10 (1) ◽  
pp. 37-39
Author(s):  
A. P. Martynova ◽  
L. P. Golyakova ◽  
A. N. Zelenkin ◽  
E. I. Polyakov

1981 ◽  
Author(s):  
T Kobayashi ◽  
M Sakon ◽  
H Ohno ◽  
J Kambayshi ◽  
G Kösaki

Platelets undergo a unique morphological changes leading to the formation of hemostatic plug. In recent years, its intermediaty metabolism has been extensively studied and the important function of plasma membrane in the platelet reaction has been recognized. The method of Barber and Jamieson has been employed in order to prepare plasma membrane vesicles of platelet of excellent quality but it is rather time consuming and the yield is relatively low. In this study, an attempt was made to isolate plasma membrane vesicles of human platelets by wheat germ agglutinin affinity chromatography.Freshly collected human citrated blood was subjected to glycerol loading and hypotonic lysis to obtain lysed platelet suspension. Then, it was applied to the affinity chromatography and the fraction of plasma membrane vesicles was eluted by 0.2 M N-acetyl glucosamine. Electron micrograph of the fraction showed round membrane vesicles with some scattered intracellular organelles. Several marker enzymes were assayed in the fraction. No appreciable amount of β-glucuronidase or cytochrome c oxidase was detected in the fraction, indicating no contamination of mitochondria or α-granules. Relatively high activity of G-6-Pase was detected, suggesting possible contamination of endoplasmic reticulum. The yield was 11.6% in dry weight and 7.9% in protein.By this method, the isolation was much faster than the centrifugal method and as low as 20 ml of human citrated whole blood may be used as starting material. Upon characterization of the plasma membrane fraction by electron microscopy and marker enzyme assays, the quality of the fraction was found comparable with the centrifugal method. The yield by this method was approximately two times higher than by the conventional method.


1966 ◽  
pp. 407-418 ◽  
Author(s):  
DARRELL C. BUSH ◽  
RALPH E. JENKINS ◽  
STANLEY B. MCCALEB

Sign in / Sign up

Export Citation Format

Share Document