Experimental Study on Prevention of Thermal Runaway Propagation in Pouch-type Lithium-ion Batteries

In this study, thermal runaway propagation characteristics and measures to prevent this phenomenon were analyzed by applying abnormal thermal conditions to pouch-type lithium-ion batteries. Experiments were conducted in a 1.5 m × 1.5 m × 1.5 m experimental chamber. During the experiment, pouch-type lithium-ion batteries were grouped according to capacity, quantity, and the use of fire extinguishing agents. Experiments showed that when thermal runaway occurred in a cell, it propagated to the adjacent cell after a certain period. The surface temperature of the cell where thermal runaway first occurred was above 200 ℃, and thermal runaway propagated via heat transfer to the adjacent cell. In the case of thermal runaway, when a fire extinguishing agent was applied, the propagation of thermal runaway to adjacent cells was prevented due to a cooling effect. However, at a cell capacity of 100 Ah, flame generation persisted and thermal runaway was unavoidable. To prevent thermal runaway propagation, it is necessary to select an extinguishing agent that exerts a cooling effect. The capacity and structure of the model unit should be considered when installing fire extinguishing systems.

Effects of Seasonal Thermal Stratification on Ammonia Nitrogen Transformation in a Source Water Reservoir

Seasonal thermal stratification has a significant impact on water quality. In this paper, the variation of vertical distribution of ammonia nitrogen in a source water reservoir was studied, on the base of field monitoring data. The dominant factor of the variation in ammonia nitrogen is the anaerobic environment caused by the seasonal thermal stratification, which leads to the degradation of nitrogen-containing organic compounds in the sediments. To determine the rates of ammonia accumulation, an in situ experimental chamber was used. The results showed that, before the formation of thermal stratification in the reservoir, sediments in the bottom of the water have a high tendency to release ammonia; the rates of ammonia accumulation in the overlying water are 40.31–111.41 mg·m−2·d−1. However, thermal stratification causes changes in the physical and chemical properties of the sediment and reduction in the degradability of the nitrogen-containing compound in the sediment. The rates of ammonia accumulation (39.44–44.65 mg·m−2·d−1) after thermal stratification are lower than before. Considering the water pollution hazards caused by seasonal thermal stratification, it is necessary to take corresponding emergency response measures to cope with the possibility of water pollution risk.

Behavioral Interactions between a Native and an Invasive Fish Species in a Thermally Heterogeneous Experimental Chamber

Mechanisms of the displacement of native fish by nonnative fish can include agonistic behaviors that push native fish species out of their preferred habitat, including their thermal optima. To examine these interactions, we built an experimental thermal preference chamber to evaluate: (1) the thermal preference of native, glacial relict northern redbelly dace Chrosomus eos; (2) if the thermal preference and movement changed in the presence of the invasive western mosquitofish Gambusia affinis; and (3) the direction of agonistic interactions. We hypothesized that G. affinis would express agonistic behavior toward C. eos, because G. affinis is widely recognized as an aggressive invader. Given the temperature range of the experimental chamber, i.e., 20–30 °C, C. eos selected an average of 24.3 °C as its thermal preference. After G. affinis’ introduction, the thermal preference of C. eos increased by 1.7 °C and the movement, given by distance (cm) travelled, increased by 21%. Contrary to our prediction, more agonistic interactions were observed in C. eos toward G. affinis. These results indicate that agonistic behavior of G. affinis toward native fish species may be species- and condition-specific, and may not always be the primary mechanism of native species’ displacement. Biological invasions are a global issue and altered thermal regimes are expected to continue. This study provided the novel approach using of a thermally heterogeneous thermal chamber to examine thermal preferences and aggressive interactions between a native and an invasive species. Future research should examine other life history traits that may be conveying the competitive advantage to G. affinis.

Analysis of the Effect of Reflected Shock Waves in the Experimental Chamber

As part of the research in the field of vacuum chamber pumping in the Environmental Electron Microscope, research on supersonic flow through apertures is being carried out at the Department of Electrical and Electronic Technology of Brno University of Technology in cooperation with the Institute of Scientific Instruments of the CAS. This paper deals with the influence of reflected shock waves on the resulting flow in the pumped part of the Experimental Chamber.

Mathematical and Physical Analysis of Pressure Gradient in the Experimental Chamber for Subsequent Comparison with Optical Methods

As a part of the research in the field of pumping vacuum chambers in the Environmental Electron Microscope, a research on supersonic flow through the Appertures is being carried out at the Department of Electrical and Electronic Technology of the Brno University of Technology in cooperation with the Institute of Scientific Instruments of the Czech Academy of Science. This paper deals with the possibility of investigating shock waves using the Shlieren optical method, which allows to observe pressure gradients as the first derivation of pressure.

Mathematical and Physical Analysis of the Effect of Conical and Detached Shock Waves at the Tip of a Static Probe in an Experimental Chamber

As part of the research in the field of pumping vacuum chambers in the Environmental Electron Microscope, research on supersonic flow through apertures is being carried out at the Department of Electrical and Electronic Technology of the Brno University of Technology in cooperation with the Institute of Scientific Instruments of the CAS. This paper deals with the influence of the shape of the static probe cone design for static pressure measurements in the supersonic flow regime in the Experimental Chamber. The cone of the probe has an effect on the shape of the shock wave, which significantly influences the detected static pressure value.

Bidirectional, Analog Current Source Benchmarked with Gray Molasses-Assisted Stray Magnetic Field Compensation

In ultracold-atom and ion experiments, flexible control of the direction and amplitude of a uniform magnetic field is necessary. It is achieved almost exclusively by controlling the current flowing through coils surrounding the experimental chamber. Here, we present the design and characterization of a modular, analog electronic circuit that enables three-dimensional control of a magnetic field via the amplitude and direction of a current flowing through three perpendicular pairs of coils. Each pair is controlled by one module, and we are able to continuously change the current flowing thorough the coils in the ±4 A range using analog waveforms such that smooth crossing through zero as the current’s direction changes is possible. With the electrical current stability at the 10−5 level, the designed circuit enables state-of-the-art ultracold experiments. As a benchmark, we use the circuit to compensate stray magnetic fields that hinder efficient sub-Doppler cooling of alkali atoms in gray molasses. We demonstrate how such compensation can be achieved without actually measuring the stray fields present, thus speeding up the process of optimization of various laser cooling stages.

Particulate Matter Dispersion Modeling in Agricultural Applications: Investigation of a Transient Open Source Solver

Agriculture is a major emitter of particulate matter (PM), which causes health problems and can act as a carrier of the pathogen material that spreads diseases. The aim of this study was to investigate an open-source solver that simulates the transport and dispersion of PM for typical agricultural applications. We investigated a coupled Eulerian–Lagrangian solver within the open source software package OpenFOAM. The continuous phase was solved using transient large eddy simulations, where four different subgrid-scale turbulence models and an inflow turbulence generator were tested. The discrete phase was simulated using two different Lagrangian solvers. For the validation case of a turbulent flow of a street canyon, the flowfield could be recaptured very well, with errors of around 5% for the non-equilibrium turbulence models (WALE and dynamicKeq) in the main regions. The inflow turbulence generator could create a stable and accurate boundary layer for the mean vertical velocity and vertical profile of the turbulent Reynolds stresses R11. The validation of the Lagrangian solver showed mixed results, with partly good agreements (simulation results within the measurement uncertainty), and partly high deviations of up to 80% for the concentration of particles. The higher deviations were attributed to an insufficient turbulence regime of the used validation case, which was an experimental chamber. For the simulation case of PM dispersion from manure application on a field, the solver could capture the influence of features such as size and density on the dispersion. The investigated solver is especially useful for further investigations into time-dependent processes in the near-source area of PM sources.

Application of Prandtl’s Theory in the Design of an Experimental Chamber for Static Pressure Measurements

Pumping in vacuum chambers is part of the field of environmental electron microscopy. These chambers are separated from each other by a small-diameter aperture that creates a critical flow in the supersonic flow regime. The distribution of pressure and shock waves in the path of the primary electron beam passing through the differentially pumped chamber has a large influence on the quality of the resulting microscope image. As part of this research, an experimental chamber was constructed to map supersonic flow at low pressures. The shape of this chamber was designed using mathematical–physical analyses, which served not only as a basis for the design of its geometry, but especially for the correct choice of absolute and differential pressure sensors with respect to the cryogenic temperature generated in the supersonic flow. The mathematical and physical analyses presented here map the nature of the supersonic flow with large gradients of state variables at low pressures at the continuum mechanics boundary near the region of free molecule motion in which the Environmental Electron Microscope and its differentially pumped chamber operate, which has a significant impact on the resulting sharpness of the final image obtained by the microscope. The results of this work map the flow in and behind the Laval nozzle in the experimental chamber and are the initial basis that enabled the optimization of the design of the chamber based on Prandtl’s theory for the possibility of fitting it with pressure probes in such a way that they can map the flow in and behind the Laval nozzle.

Smart Feeding Unit for Measuring the Pecking Force in Farmed Broilers

Feeding is one of the most critical processes in the broiler production cycle. A feeder can collect data of force signals and continuously transform it into information about birds’ feed intake and quickly permit more agile and more precise decision-making concerning the broiler farm’s production process. A smart feeding unit (SFU) prototype was developed to evaluate the broiler pecking force and average feed intake per pecking (g/min). The prototype consisted of a power supply unit with a data acquisition module, management software connected to a computer for data storage, and a video camera to verify the pecking force during signal processing. In the present study, seven male Cobb-500 broilers were raised in an experimental chamber to test and commission the prototype. The prototype consisted of a feeding unit (feeder) with a data acquisition module (amplifier), with real-time integration for testing and intuitive operation with Catman Easy software connected to a computer to obtain and store data from signals. The sampling of average feed intake per pecking per broiler (g) was conducted during the first minute of feeding, subtracting the amount of feed provided per the amount of feed consumed, including the count of pecking in the first minute of feeding. An equation was used for estimating the average feed intake per pecking per broiler (g). The results showed that the average broiler pecking force was 1.39 N, with a minimum value of 0.04 N and a maximum value of 7.29 N. The average feed intake per pecking (FIP) was 0.13 g, with an average of 173 peckings per minute. The acquisition, processing, and classification of signals in the pecking force information were valuable during broilers’ feeding. The smart feeding unit prototype for broilers was efficient in the continuous assessment of feed intake and can generate information for estimating broiler performance.