scholarly journals Ecological criterion effect on the forest road network longitudinal gradient

Author(s):  
Petr Hrůza

The specific way in which a forest road is designed affects the management in the forest environment and timber transport. The aim of this study was to find out whether an inclusion of the ecological criterion in the forest road design will change the parameter of the longitudinal gradient of forest hauling roads and whether these changes will have an effect on the accessibility of forest stands by timber hauling machinery. The possible changes in the longitudinal gradient can also affect the technology of forest road surfacing and the selection of the appropriate surface type. We can state that an inclusion of the ecological criterion in the forest road network design will bring statistically significant changes in longitudinal gradients of forest hauling roads. The mean longitudinal gradient of the current forest road network is 2.82 % and the mean longitudinal gradient of the forest road network designed with inclusion of the ecological criterion is 4.82 %. The results show statistically significant changes in the longitudinal parameters of forest hauling roads. However, it will not bring a need for a change in construction technology, and will not affect the accessibility of forest stands by timber hauling machinery.

2016 ◽  
Vol 25 (2) ◽  
pp. e059 ◽  
Author(s):  
Aidin Parsakhoo

Aim of study: Corrected Backmund and Surface Distribution Algorithms (SDA) for analysis of forest road network are introduced and presented in this study. Research was carried out to compare road network performance between two districts in a hardwood forest.Area of study: Shast Kalateh forests, Iran. Materials and methods: In uncorrected Backmund algorithm, skidding distance was determined by calculating road density and spacing and then it was designed as Potential Area for Skidding Operations (PASO) in ArcGIS software. To correct this procedure, the skidding constraint areas were taken using GPS and then removed from PASO. In SDA, shortest perpendicular distance from geometrical center of timber compartments to road was measured at both districts. Main results: In corrected Backmund, forest openness in district I and II were 70.3% and 69.5%, respectively. Therefore, there was little difference in forest openness in the districts based on the uncorrected Backmund. In SDA, the mean distance from geometrical center of timber compartments to the roads of districts I and II were 199.45 and 149.31 meters, respectively. Forest road network distribution in district II was better than that of district I relating to SDA.Research highlights: It was concluded that uncorrected Backmund was not precise enough to assess forest road network, while corrected Backmund could exhibit a real PASO by removing skidding constraints. According to presented algorithms, forest road network performance in district II was better than district I.


2011 ◽  
Vol 57 (No. 11) ◽  
pp. 467-471 ◽  
Author(s):  
M. Lotfalian ◽  
E.H. Zadeh ◽  
S.A. Hosseini

  Average skidding distance for forest stands is an important parameter for the determination of the optimum road density and spacing. In this research the real mean skidding distance and theoretical mean skidding distance were measured to calculate the correction factor of skidding distance for Chafrood forest in Hyrcanian zone. The length and azimuth of skid trails from road and depot junction to forest interior were measured. Moreover, the position of skid trail was recorded by GPS. These skid trails with a buffer of 140 m were designed on a topographical map using Arc GIS software. Results indicated that the road spacing of 500 m in the study area resulted in a theoretical mean skidding distance of 125 m. For a real mean skidding distance of 525.9 m and for the mean slope of 40%, the correction factor was estimated to be 4.2.


2004 ◽  
Vol 155 (5) ◽  
pp. 142-145 ◽  
Author(s):  
Claudio Defila

The record-breaking heatwave of 2003 also had an impact on the vegetation in Switzerland. To examine its influences seven phenological late spring and summer phases were evaluated together with six phases in the autumn from a selection of stations. 30% of the 122 chosen phenological time series in late spring and summer phases set a new record (earliest arrival). The proportion of very early arrivals is very high and the mean deviation from the norm is between 10 and 20 days. The situation was less extreme in autumn, where 20% of the 103 time series chosen set a new record. The majority of the phenological arrivals were found in the class «normal» but the class«very early» is still well represented. The mean precocity lies between five and twenty days. As far as the leaf shedding of the beech is concerned, there was even a slight delay of around six days. The evaluation serves to show that the heatwave of 2003 strongly influenced the phenological events of summer and spring.


2016 ◽  
Vol 167 (5) ◽  
pp. 294-301
Author(s):  
Leo Bont

Optimal layout of a forest road network The road network is the backbone of forest management. When creating or redesigning a forest road network, one important question is how to shape the layout, this means to fix the spatial arrangement and the dimensioning standard of the roads. We consider two kinds of layout problems. First, new forest road network in an area without any such development yet, and second, redesign of existing road network for actual requirements. For each problem situation, we will present a method that allows to detect automatically the optimal road and harvesting layout. The method aims to identify a road network that concurrently minimizes the harvesting cost, the road network cost (construction and maintenance) and the hauling cost over the entire life cycle. Ecological issues can be considered as well. The method will be presented and discussed with the help of two case studies. The main benefit of the application of optimization tools consists in an objective-based planning, which allows to check and compare different scenarios and objectives within a short time. The responses coming from the case study regions were highly positive: practitioners suggest to make those methods a standard practice and to further develop the prototype to a user-friendly expert software.


REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.


2019 ◽  
Vol 13 (3) ◽  
pp. 235-240
Author(s):  
Iryna Solonenko

The development of road network infrastructure is an important component of the economic development of the European Union. Updating of the road network contributes to the integration of the economies of countries into a coherent whole. The road network provides the free movement of citizens, the movement of goods and the effective implementation of various services. The increase in the length of the road network leads to an increase in the financial and material costs necessary to ensure its maintenance and repair. One of the ways to reduce costs is by strengthening the physic-mechanical and operational characteristics of the pavement due to the widespread use of cement concrete. The quality of the pavement of cement concrete depends largely on the rational selection of its composition. This allows a significant increase in the durability of road pavement. The purpose of the research was: the development of recommendations for the rational selection of the composition of the road pavement material of cement concrete, aimed at upgrading longevity, and taking into account its frost resistance grade. According to the goal, the following tasks were developed: the analyses of the climatic zones in which the road network of the European Union is located; the development of a research plan, a selection of the response function and influence factors; the study of physico-mechanical and operational characteristics of the researched material of road pavement; on the basis of the obtained data, the calculation of the complex of experimental-statistical models, which describe the physico-mechanical and operational characteristics of the road pavement material; on the basis of experimental statistical models, a method was proposed for selecting the rational compositions of the cement concrete pavement road material depending on the conditions of its application. The results presented in the article can be used in engineering and scientific practice for the selection of road pavement from cement concrete for highways.


Neurosurgery ◽  
2003 ◽  
Vol 52 (4) ◽  
pp. 732-739 ◽  
Author(s):  
Brian L. Hoh ◽  
Bob S. Carter ◽  
Christopher M. Putman ◽  
Christopher S. Ogilvy

Abstract OBJECTIVE Intracranial residual and recurrent aneurysms can occur after surgical clipping, with risks of growth and rupture. In the past, surgical reoperation, which can be associated with higher risk than the initial operation, was the only available treatment. A combined neurovascular team that uses both surgical and endovascular therapies could maximize efficacy and outcomes while minimizing risks in these difficult cases. The indications for which surgical or endovascular treatment should be used to treat patients with residual or recurrent aneurysms, however, have not been elucidated well. We have reviewed the 10-year experience of our combined neurovascular team to determine in a retrospective manner which factors were important to treatment modality selection for patients with these residual and recurrent lesions. METHODS From 1991 to 2001, the combined neurovascular unit at the Massachusetts General Hospital treated 25 residual and recurrent previously clipped aneurysms (15 had been clipped at other centers). Only patients in whom a clip had been placed were included in the study; patients who did not have a clip placed or whose aneurysms were wrapped or coated were excluded. The radiographic studies and clinical data were reviewed retrospectively to determine the efficacy, outcomes, and factors important to the selection of treatment strategy in these patients. RESULTS The patients' clinical presentations were radiographic follow-up, 17 patients; rehemorrhage, 3; mass effect, 3; and thromboembolism, 2. The mean aneurysm recurrence or residual size was 11 mm (range, 4–26 mm). The mean interval until representation was 6.6 years (range, 1 wk–25 yr). Treatment consisted of: coiling, 11 patients; reclipping, 8; proximal parent vessel balloon occlusion, 2; extracranial-intracranial bypass with coil occlusion of aneurysm and parent vessel, 2; extracranial-intracranial bypass with clip trapping, 1; and extracranial-intracranial bypass with proximal clip occlusion of parent vessel, 1. The mean radiographic follow-up period was 11 months. Complete angiographic occlusion was found in 19 aneurysms (76%), at least 90% occlusion was found in 4 aneurysms (16%), intentional partial coil obliteration was found in 1 fusiform lesion (4%), and intentional retrograde flow was found in 1 fusiform lesion (4%). Clinical outcomes were excellent or good in 19 patients (76%). Twenty-one patients (84%) were neurologically the same after retreatment (13 remained neurologically intact, and 8 had preexisting neurological deficits that did not change). Three patients (12%) had new neurological deficits after retreatment, and one patient (4%) died. There were four complications of retreatment (16%), one of which was a fatal hemorrhage in a patient 1 month after intentional partial coil obliteration of a fusiform vertebrobasilar junction aneurysm. Factors important to the selection of treatment modality were recurrence or residual location (all posterior circulation lesions were treated endovascularly), lesion size (lesions larger than 10 mm were treated endovascularly or with the use of combined techniques), and aneurysm morphology (fusiform and wide-necked lesions were treated endovascularly or with the use of combined techniques). CONCLUSION The proper selection of surgical or endovascular treatment for residual and recurrent previously clipped aneurysms can achieve excellent radiographic efficacy with low mortality. Factors important to the selection of treatment by this combined neurovascular team were posterior circulation location, aneurysm size larger than 10 mm, and fusiform morphology, which were treated endovascularly or with the use of combined techniques because of the higher surgical risk associated with these factors. For aneurysms with lower surgical risk, such as some anterior circulation aneurysms and aneurysms smaller than 10 mm, we prefer to perform a reoperation because of superior radiographic cure without compromising the outcome.


1969 ◽  
Vol 13 (2) ◽  
pp. 117-126 ◽  
Author(s):  
Derek J. Pike

Robertson (1960) used probability transition matrices to estimate changes in gene frequency when sampling and selection are applied to a finite population. Curnow & Baker (1968) used Kojima's (1961) approximate formulae for the mean and variance of the change in gene frequency from a single cycle of selection applied to a finite population to develop an iterative procedure for studying the effects of repeated cycles of selection and regeneration. To do this they assumed a beta distribution for the unfixed gene frequencies at each generation.These two methods are discussed and a result used in Kojima's paper is proved. A number of sets of calculations are carried out using both methods and the results are compared to assess the accuracy of Curnow & Baker's method in relation to Robertson's approach.It is found that the one real fault in the Curnow-Baker method is its tendency to fix too high a proportion of the genes, particularly when the initial gene frequency is near to a fixation point. This fault is largely overcome when more individuals are selected. For selection of eight or more individuals the Curnow-Baker method is very accurate and appreciably faster than the transition matrix method.


Sign in / Sign up

Export Citation Format

Share Document