Anisotropic Effective Moduli of Cracked Short-Fiber Reinforced Composites

1999 ◽  
Vol 66 (3) ◽  
pp. 709-713 ◽  
Author(s):  
R. S. Feltman ◽  
M. H. Santare
Keyword(s):  
Short Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Effective Moduli ◽  
Fiber Reinforced ◽  
Fiber Fracture ◽  
Composite Systems ◽  
Reinforced Composite ◽  
Anisotropic Elastic ◽  
Energy Dissipated

A model is presented to analyze the effect of fiber fracture on the anisotropic elastic properties of short-fiber reinforced composite materials. The effective moduli of the material are modeled using a self-consistent scheme which includes the calculated energy dissipated through the opening of a crack in an arbitrarily oriented elliptical inclusion. The model is an extension of previous works which have modeled isotropic properties of short-fiber reinforced composites with fiber breakage and anisotropic properties of monolithic materials with microcracks. Two-dimensional planar composite systems are considered. The model allows for the calculation of moduli under varying degrees of fiber alignment and damage orientation. In the results, both aligned fiber systems and randomly oriented fiber systems with damage-induced anisotropy are examined.

scholarly journals A computational modeling approach based on random fields for short fiber-reinforced composites with experimental verification by nanoindentation and tensile tests

2021 ◽  
Author(s):  
Natalie Rauter
Keyword(s):  
Numerical Simulations ◽  
Correlation Functions ◽  
Material Properties ◽  
Random Fields ◽  
Tensile Tests ◽  
Short Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Component Level

AbstractIn this study a modeling approach for short fiber-reinforced composites is presented which allows one to consider information from the microstructure of the compound while modeling on the component level. The proposed technique is based on the determination of correlation functions by the moving window method. Using these correlation functions random fields are generated by the Karhunen–Loève expansion. Linear elastic numerical simulations are conducted on the mesoscale and component level based on the probabilistic characteristics of the microstructure derived from a two-dimensional micrograph. The experimental validation by nanoindentation on the mesoscale shows good conformity with the numerical simulations. For the numerical modeling on the component level the comparison of experimentally obtained Young’s modulus by tensile tests with numerical simulations indicate that the presented approach requires three-dimensional information of the probabilistic characteristics of the microstructure. Using this information not only the overall material properties are approximated sufficiently, but also the local distribution of the material properties shows the same trend as the results of conducted tensile tests.

scholarly journals Multiscale thermomechanical modeling of short fiber-reinforced composites

2017 ◽  
Vol 24 (5) ◽  
pp. 765-772 ◽  
Author(s):  
Dawei Jia ◽  
Huiji Shi ◽  
Lei Cheng
Keyword(s):  
Thermal Loading ◽  
Volume Fraction ◽  
Numerical Procedure ◽  
Thermal Conditions ◽  
Cyclic Hardening ◽  
Short Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Thermomechanical Modeling

AbstractA study of the micromechanical behavior to predict the overall response of short fiber-reinforced composites under cyclic mechanical and thermal loading is presented. The instantaneous average over a “representative volume” of the material is considered. The influence of the short fiber’s aspect ratio, volume fraction, and spatial orientation has been investigated. The linear combined hardening model is used to describe the cyclic hardening effects in the case of metal matrix. A numerical procedure is used to predict the response of composites under mechanical and thermal conditions. The results of the numerical procedure have been compared to the results of three different models and to published experimental data.

Study of the Crack Propagation for Particles Reinforced Composite Materials with Different Inclusion Distribution

2012 ◽  
Vol 461 ◽  
pp. 338-342 ◽  
Author(s):  
Da Zhao Deng ◽  
Ji Xiang Luo
Keyword(s):  
Composite Materials ◽  
Crack Propagation ◽  
Engineering Application ◽  
Reference Value ◽  
Voronoi Cell ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Reinforced Composite ◽  
Inclusion Distribution

Based on the Voronoi cell finite element can also reflect fiber reinforced composites interface to take off the layer and matrix crack propagation of the new cell (X-VCFEM cell)[1]. Combined with the re-mesh strategy and grid dynamic technology, Simulated analysis in different inclusion distribution, interface crack propagation for fiber reinforced composites, the results show that for the model with multiple Voronoi cell, The horizontal tension was the largest; For only a Voronoi cell, The size of the horizontal tension was little change.The result was very important reference value for manufacturing process and engineering application of fiber reinforced composite materials.

Sign in / Sign up

Export Citation Format

Share Document