An Approach to Characterize Nonlinear Viscoelastic Material Behavior Using Dynamic Mechanical Tests and Analyses

1999 ◽  
Vol 66 (4) ◽  
pp. 872-878 ◽  
Author(s):  
H. J. Golden ◽  
T. W. Strganac ◽  
R. A. Schapery
Keyword(s):  
Viscoelastic Model ◽  
Dynamic Test ◽  
Mechanical Analysis ◽  
Mechanical Tests ◽  
Material Behavior ◽  
Dynamic Mechanical ◽  
Nonlinear Characterization ◽  
Nonlinear Viscoelastic ◽  
Linear Viscoelastic ◽  
Nonlinear Viscoelastic Model

Linear viscoelastic properties may be rapidly identified using dynamic mechanical analysis methods, yet these traditional methods do not properly identify nonlinear viscoelastic response. Herein, dynamic mechanical methodologies are extended to provide an approach for nonlinear characterization. The proposed method is based on Schapery's nonlinear viscoelastic model extended to dynamic mechanical theory. The oscillatory loading during a dynamic test is addressed within the nonlinear viscoelastic model. An experimental protocol is established. Analyses and experiments are performed for the characterization of thin-film polyethylene to validate the approach.

A Nonlinear Viscoelastic Model for the Relaxation Behavior of Tendon

2012 ◽  
Author(s):  
Frances M. Davis ◽  
Raffaella De Vita
Keyword(s):  
Stress Relaxation ◽  
Relaxation Function ◽  
Viscoelastic Model ◽  
Viscoelastic Behavior ◽  
Relaxation Behavior ◽  
Successful Model ◽  
Viscoelastic Models ◽  
Nonlinear Viscoelastic ◽  
Linear Viscoelastic ◽  
Nonlinear Viscoelastic Model

Tendons are viscoelastic materials which undergo stress relaxation when held at a constant strain. The most successful model used to describe the viscoelastic behavior of tendons is the quasi-linear viscoelastic (QLV) model [1]. In the QLV model, the relaxation function is assumed to be a separable function of time and strain. Recently, this assumption has been shown to be invalid for tendons [2] thus suggesting the need for new nonlinear viscoelastic models.

Free volume based nonlinear viscoelastic model for polyurea over a wide range of strain rates and temperatures

2021 ◽  
Vol 152 ◽  
pp. 103650
Author(s):  
Chencheng Gong ◽  
Yan Chen ◽  
Ting Li ◽  
Zhanli Liu ◽  
Zhuo Zhuang ◽  
...  
Keyword(s):  
Free Volume ◽  
Viscoelastic Model ◽  
Strain Rates ◽  
Nonlinear Viscoelastic ◽  
Wide Range ◽  
Nonlinear Viscoelastic Model

Identification of Nonlinear Viscoelastic Models of Flexible Polyurethane Foam From Uniaxial Compression Data

2016 ◽  
Vol 138 (2) ◽  
Author(s):  
Yousof Azizi ◽  
Patricia Davies ◽  
Anil K. Bajaj
Keyword(s):  
Uniaxial Compression ◽  
Viscoelastic Model ◽  
Viscoelastic Behavior ◽  
Model Parameters ◽  
Viscoelastic Models ◽  
Nonlinear Viscoelastic ◽  
Compression Data ◽  
Computationally Intensive ◽  
Nonlinear Viscoelastic Model ◽  
Flexible Polyurethane

Flexible polyethylene foam is used in many engineering applications. It exhibits nonlinear and viscoelastic behavior which makes it difficult to model. To date, several models have been developed to characterize the complex behavior of foams. These attempts include the computationally intensive microstructural models to continuum models that capture the macroscale behavior of the foam materials. In this research, a nonlinear viscoelastic model, which is an extension to previously developed models, is proposed and its ability to capture foam response in uniaxial compression is investigated. It is hypothesized that total stress can be decomposed into the sum of a nonlinear elastic component, modeled by a higher-order polynomial, and a nonlinear hereditary type viscoelastic component. System identification procedures were developed to estimate the model parameters using uniaxial cyclic compression data from experiments conducted at six different rates. The estimated model parameters for individual tests were used to develop a model with parameters that are a function of strain rates. The parameter estimation technique was modified to also develop a comprehensive model which captures the uniaxial behavior of all six tests. The performance of this model was compared to that of other nonlinear viscoelastic models.

On the Nonlinear Viscoelastic Behaviour of the PVC-Coated Fabric

2010 ◽  
Vol 160-162 ◽  
pp. 1476-1481 ◽  
Author(s):  
Wu Lian Zhang ◽  
Xin Ding ◽  
Xu Dong Yang
Keyword(s):  
Viscoelastic Model ◽  
Constitutive Relationship ◽  
Viscoelastic Behaviour ◽  
Viscoelastic Response ◽  
Nonlinear Parameters ◽  
Creep And Recovery ◽  
Nonlinear Viscoelastic ◽  
Coated Fabric ◽  
Nonlinear Viscoelastic Model

The nonlinear viscoelastic response of a PVC-Coated Fabric has been studied. For the needs of the present study, creep and recovery tests in tension of both the warp and the weft directions at the different stress levels were executed while measurements were made of the creep and recovery strain response of the system. For the description of the viscoelastic behaviour of the material, Schapery’s nonlinear viscoelastic model was used. For the description of the nonlinear viscoelastic response and the determination of the nonlinear parameters, a method by using a combination of analytical formulations and numerical procedures based on a modified version of Schapery’s constitutive relationship where an instantaneous plastic and a transient plastic terms were added, has been developed. The method has been successfully applied to the current tests.

scholarly journals Variability of Mechanical Properties of Collagen Membranes used in Dentistry

2018 ◽  
Vol 55 (4) ◽  
pp. 488-493
Author(s):  
Loredana Santo ◽  
Fabrizio Quadrini ◽  
Denise Bellisario ◽  
Antonella Polimeni ◽  
Anna Santarsiero
Keyword(s):  
Stress Relaxation ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Mechanical Tests ◽  
Static Behavior ◽  
Density Measurements ◽  
Dynamic Mechanical ◽  
Dependent Behavior ◽  
Order Of Magnitude ◽  
Collagen Membranes

The aim of this study is proposing a combination of measurements to assess the functional variability of collagen membranes used in Guided Bone Regeneration (GBR) and Guided Tissue Regeneration (GTR) techniques. As far as clinical applications are concerned, a proper qualification is critical when deciding, among commercially available collagen membranes, upon the most appropriate one for each specific clinical case. Two commercially available collagen membranes, namely Collprotect� and Jason�, were considered for the experimentation. After thickness and density measurements, the quasi-static behavior was studied for both membranes by means of conventional mechanical tests, i.e. tear and tensile tests, whereas their time-dependent behavior was evaluated by means of stress relaxation tests and dynamic mechanical analysis. Collagen membranes showed an elevated among samples variability. The variability within the same kind of membrane is of the same order of magnitude of the between membrane kinds variability. All the membranes showed strong time dependence both in stress relaxation and in dynamic mechanical tests. This fact should be taken under consideration for the membrane final application.

scholarly journals Delayed electromechanical instability of a viscoelastic dielectric elastomer balloon

2019 ◽  
Vol 475 (2229) ◽  
pp. 20190316 ◽  
Author(s):  
Xiongfei Lv ◽  
Liwu Liu ◽  
Jinsong Leng ◽  
Yanju Liu ◽  
Shengqiang Cai
Keyword(s):  
Hoop Stress ◽  
Mechanical Load ◽  
Viscoelastic Model ◽  
Dielectric Elastomer ◽  
Time Dependent ◽  
Convex Shape ◽  
Nonlinear Viscoelastic ◽  
Electromechanical Instability ◽  
Electromechanical Loading ◽  
Nonlinear Viscoelastic Model

When a dielectric elastomer (DE) balloon is subjected to electromechanical loading, instability may happen. In recent experiments, it has been shown that the instability configuration of a DE balloon under electromechanical loading can be very different from that only subjected to mechanical load. It has also been observed in the experiments that the electromechanical instability phenomena of a DE balloon can be highly time-dependent. In this article, we adopt a nonlinear viscoelastic model for the DE membrane to investigate the time-dependent electromechanical instability of a DE balloon. Using the model, we show that under a constant electromechanical loading, a DE balloon may gradually evolve from a convex shape to a non-convex shape with bulging out in the centre, and compressive hoop stress can also gradually develop the balloon, resulting in wrinkles as observed in the experiments. We have further shown that the snap-through instability phenomenon of the DE balloon also greatly depends on the ramping rate of the applied voltage.

Sign in / Sign up

Export Citation Format

Share Document