The Opposite Pole Quadrilateral as a Compatibility Linkage for Parameterizing the Center Point Curve

1993 ◽  
Vol 115 (2) ◽  
pp. 332-336 ◽  
Author(s):  
J. M. McCarthy
Keyword(s):  
Complex Number ◽  
Kinematic Analysis ◽  
Special Form ◽  
Body Form ◽  
Kinematic Theory ◽  
Opposite Pole ◽  
Center Point ◽  
Point Curve ◽  
Position Problem ◽  
Four Bar Linkage

In planar four-position kinematics, the centers of circles containing four positions of a point in a moving rigid body form the center point curve. This curve can be parameterized by analyzing a “compatibility linkage” obtained from a complex number formulation of the four-position problem. In this paper, we present another derivation of the center point curve using a special form of dual quaternions and the fact that it is identical to the pole curve. The defining properties of the pole curve lead to a parameterization by kinematic analysis of the opposite pole quadrilateral as a four-bar linkage. Thus the opposite pole quadrilateral becomes the compatibility linkage. This derivation generalizes to provide parameterizations for the center point cone of spherical kinematics and the central axis congruence of spatial kinematic theory.

Geometric Characteristics of the Center-Point Curve Based on the Kinematics of the Compatibility Linkage

1992 ◽  
Author(s):  
J. A. Schaaf ◽  
J. A. Lammers
Keyword(s):  
Complex Number ◽  
Change Point ◽  
Double Point ◽  
Classification Scheme ◽  
Center Point ◽  
Degenerate Form ◽  
Point Curve ◽  
Position Synthesis ◽  
Point Form

Abstract In this paper we develop a method of characterizing the center-point curves for planar four-position synthesis. We predict the five characteristic shapes of the center-point curve using the kinematic classification of the compatibility linkage obtained from a complex number formulation for planar four-position synthesis. This classification scheme is more extensive than the conventional Grashof and non-Grashof classifications in that the separate classes of change point compatibility linkages are also included. A non-Grashof compatibility linkage generates a unicursal form of the center-point curve; a Grashof compatibility linkage generates a bicursal form; a single change point compatibility linkage generates a double point form; and a double or triple change point compatibility linkage generates a circular-degenerate or a hyperbolic-degenerate form.

Identifying Sets of Four and Five Positions That Generate Distinctive Center-Point Curves

2009 ◽  
Author(s):  
David H. Myszka ◽  
Andrew P. Murray
Keyword(s):  
Closed Form ◽  
The Other ◽  
Specific Design ◽  
Opposite Pole ◽  
Center Point ◽  
Point Curve ◽  
Position Synthesis ◽  
Two Sides ◽  
Cubic Function

The fixed pivots of a planar 4R linkage that can achieve four design positions are constrained to a center-point curve. The curve is a circular cubic function and plots can take one of five different forms. The center-point curve can be generated with a compatibility linkage obtained from an opposite pole quadrilateral of the four design positions. This paper presents a method to identify design positions that generate distinctive shapes of the center-point curves. The form of the center-point curve is dependent on whether the shape of the opposite pole quadrilateral is an open or closed form of a rhombus, kite, parallelogram, or when the sum of two sides equals the other two. Interesting cases of three and five position synthesis are also explored. Four and five position cases are generated that have center points at infinity allowing a PR dyad with line of slide in any direction to achieve the design positions. Further, a center-point curve for five specific design positions is revealed.

Generalized Cardan Motion

1969 ◽  
Vol 91 (1) ◽  
pp. 135-141 ◽  
Author(s):  
D. Tesar ◽  
H. Anderson
Keyword(s):  
Design Procedures ◽  
Center Point ◽  
Point Curve ◽  
Moving Plane ◽  
Position Problem ◽  
Graphical Design

Cardan motion has been treated in the literature principally in terms of infinitesimally separated positions. Here Cardan motion is synthesized for all combinations of up to five infinitesimally and finitely separated positions of the moving plane. For each of the five distinct combinations which exist for four positions, the circle point curve is shown to degenerate into a circle and a line and the center point curve into a line at infinity and a hyperbola. Elementary analytical and graphical design procedures are provided and supported by examples. The five position problem is shown to be constrained only by the well-known Scott-Russell mechanism or a double-slider mechanism.

A Parameterization of the Central Axis Congruence Associated with Four Positions of a Rigid Body in Space

1993 ◽  
Vol 115 (3) ◽  
pp. 547-551 ◽  
Author(s):  
J. M. McCarthy
Keyword(s):  
Rigid Body ◽  
The Body ◽  
Central Axis ◽  
Spatial Mechanisms ◽  
Center Point ◽  
Point Curve ◽  
Screw Surface ◽  
Computer Based

Given four positions of a rigid body in space, there is a congruence of lines that can be used as the central axes of cylindric cranks to guide the body through the four positions. This “central axis congruence” is a generalization of the center point curve of planar kinematics. It is known that this congruence is identical to the screw congruence which arises in the study of complementary screw quadrilateral. It is less well-known that the screw congruence is the “screw surface” of the 4C linkage formed by the complementary screw quadrilateral, and it is this relationship that we use to obtain a parameterization for the screw congruence and in turn, the central axis congruence. This parameterization should facilitate the use of this congruence in computer based design of spatial mechanisms.

Kinematic Analysis of Spherical Four-Bar Linkages via the Inflection Cubic and Thales Ellipse

2015 ◽  
Author(s):  
Giorgio Figliolini ◽  
Jorge Angeles
Keyword(s):  
Special Interest ◽  
Kinematic Analysis ◽  
Vector Fields ◽  
Three Dimensions ◽  
Unique Point ◽  
Planar Case ◽  
Acceleration Vector ◽  
The Subject ◽  
Four Bar Linkage ◽  
Spherical Motion

The subject of this paper is the formulation of a specific algorithm for the kinematic analysis of spherical four-bar linkages via the inflection spherical cubic and spherical Thales ellipse by devoting particular attention to the crossed four-bar linkage (anti-parallelogram). Moreover, both the inflection and the elliptic cones, which represent the equivalent of the Bresse cylinders of the planar case in three-dimensions, are obtained by showing the particular properties of the spherical motion in terms of the curvature of a coupler curve and both the velocity and acceleration vector fields. Of special interest are also the cases in which the three acceleration poles coincide at one unique point or in two plus one, which depends on the intersections of two spherical curves of third and second degree.

Slider-Cranks as Compatibility Linkages for Parametrizing Center-Point Curves

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
David H. Myszka ◽  
Andrew P. Murray
Keyword(s):  
Direct Method ◽  
Center Point ◽  
Crank Angle ◽  
Point Curve ◽  
A Direct Method

In synthesizing a planar 4R linkage that can achieve four positions, the fixed pivots are constrained to lie on a center-point curve. It is widely known that the curve can be parametrized by a 4R compatibility linkage. In this paper, a slider-crank is presented as a suitable compatibility linkage to generate the center-point curve. Furthermore, the center-point curve can be parametrized by the crank angle of a slider-crank linkage. It is observed that the center-point curve is dependent on the classification of the slider-crank. Lastly, a direct method to calculate the focus of the center-point curve is revealed.

Computational Kinematic Analysis of Higher Pairs with Multiple Contacts

1995 ◽  
Vol 117 (2A) ◽  
pp. 269-277 ◽  
Author(s):  
E. Sacks ◽  
L. Joskowicz
Keyword(s):  
Configuration Space ◽  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Contact Conditions ◽  
Two Degrees Of Freedom ◽  
Kinematic Theory ◽  
Multiple Contacts

We present a computational kinematic theory of higher pairs with multiple contacts, including simultaneous contacts, intermittent contacts, and changing contacts. The theory systematizes single- and multiple-contact kinematic analysis by mapping it into geometric computation in configuration space. It derives the contact conditions, contact functions, and relations between contacts from the shapes and degrees of freedom of the parts. It helps identify common design flaws, such as undercutting, interference, and jamming, that cannot be systematically identified with current methods. We describe a program for the most common pairs: planar higher pairs with two degrees of freedom.

Slider Cranks as Compatibility Linkages for Parameterizing Center Point Curves

2009 ◽  
Author(s):  
David H. Myszka ◽  
Andrew P. Murray
Keyword(s):  
Direct Method ◽  
Center Point ◽  
Crank Angle ◽  
Point Curve ◽  
A Direct Method

In synthesizing a planar 4R linkage that can achieve four positions, the fixed pivots are constrained to lie on a center-point curve. It is widely known that the curve can be parameterized by a 4R compatibility linkage. In this paper, a slider crank is presented as a suitable compatibility linkage to generate the centerpoint curve. Further, the center-point curve can be parametrized by the crank angle of a slider crank linkage. It is observed that the center-point curve is dependent on the classification of the slider crank. Lastly, a direct method to calculate the focus of the center-point curve is revealed.

Sign in / Sign up

Export Citation Format

Share Document