Crowned Spur Gears: Methods for Generation and Tooth Contact Analysis—Part I: Basic Concepts, Generation of the Pinion Tooth Surface by a Plane

1988 ◽  
Vol 110 (3) ◽  
pp. 337-342 ◽  
Author(s):  
F. L. Litvin ◽  
J. Zhang ◽  
R. F. Handschuh
Keyword(s):  
Gear Tooth ◽  
Contact Analysis ◽  
Numerical Results ◽  
Degree Of Freedom ◽  
Tooth Surface ◽  
Spur Gears ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Transmission Errors ◽  
Basic Concepts

A topology of crowned spur pinion tooth surface that reduces the level of transmission errors due to misalignment is proposed. The geometry of the deviated pinion tooth surface and regular gear tooth surface, along with tooth contact analysis is discussed. Generation of the deviated pinion tooth surface by a plane whose motion is controlled by a five-degree-of-freedom system is proposed. Numerical results are included and indicate that transmission errors remain low as the gears are misaligned.

Optimal Tooth Surface Modifications in Face-Hobbed Hypoid Gears

2013 ◽  
Vol 572 ◽  
pp. 351-354
Author(s):  
Simon Vilmos
Keyword(s):  
Contact Pressure ◽  
Angular Displacement ◽  
Optimization Procedure ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Hypoid Gears ◽  
Transmission Errors ◽  
Loaded Tooth Contact Analysis

In this study, an optimization methodology is proposed to systematically define head-cutter geometry and machine tool settings to introduce optimal tooth modifications in face-hobbed hypoid gears. The goal of the optimization is to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear, while concurrently confining the loaded contact pattern within the tooth boundaries. The proposed optimization procedure relies heavily on a loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors. The objective function and the constraints are not available analytically, but they are computable, i.e., they exist numerically through the loaded tooth contact analysis. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated by using a face-hobbed hypoid gear example. Considerable reductions in the maximum tooth contact pressure and in the transmission errors were obtained.

Coupled Tooth Contact Analysis of Intersected Beveloid Gears for Marine Transmissions

2013 ◽  
Author(s):  
Caichao Zhu ◽  
Haixia Wang ◽  
Mingyong Liu ◽  
Xuesong Du ◽  
Chaosheng Song
Keyword(s):  
Gear Tooth ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Contact Patterns ◽  
Beveloid Gears ◽  
Shaft Angle ◽  
Loaded Tooth Contact Analysis ◽  
Mesh Condition

Beveloid gears are widely applied in fields like ships, automobiles and industrial precision transmissions. In this paper, the formulas of the beveloid gear tooth surface used in marine transmissions were derived and a mesh model for the intersected beveloid gear pair was setup. Then loaded tooth contact analysis was performed using the finite element method considering the coupling of the assembly errors and the elastic deformation of tooth surface. Through the analysis, the influences of assembly errors on contact patterns, mesh force and tooth surface deformations were investigated. In a further step, the tooth profile modifications were performed to alleviate the edge contact and a subsequent major improvement of the mesh condition was obtained. Finally, loaded tooth contact experiments for marine gearboxes with small shaft angle were conducted. The tested results showed good correlation with the computed results. This work may provide some value for the practical design aiming at improved contact characteristics of the beveloid gears with intersected axes.

Tooth Contact Analysis of Parabolic Gears with New Type of Profile

2013 ◽  
Vol 365-366 ◽  
pp. 294-298 ◽  
Author(s):  
Shu Yan Zhang ◽  
Hui Guo
Keyword(s):  
High Strength ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Transmission Errors ◽  
Bearing Contact ◽  
New Type

The meshing principle of a new kind of parabolic gear is introduced, and the tooth surface equations of parabolic gear are obtained. A tooth contact analysis to simulate meshing and contact is applied. The paper investigates the influence of misalignment on transmission errors and shift of bearing contact. Examples to illustrate the developed approaches are proposed. The research provides the basis for design of new high strength parabolic gears.

An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears Having Local and Global Surface Deviations

2010 ◽  
Vol 132 (7) ◽  
Author(s):  
M. Kolivand ◽  
A. Kahraman
Keyword(s):  
Gear Tooth ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Hypoid Gear ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Hypoid Gears ◽  
Surface Deviations ◽  
Tooth Surfaces ◽  
Loaded Tooth Contact Analysis

Actual hypoid gear tooth surfaces do deviate from the theoretical ones either globally due to manufacturing errors or locally due to reasons such as tooth surface wear. A practical methodology based on ease-off topography is proposed here for loaded tooth contact analysis of hypoid gears having both local and global deviations. This methodology defines the theoretical pinion and gear tooth surfaces from the machine settings and cutter parameters, and constructs the surfaces of the theoretical ease-off and roll angle to compute for the unloaded contact analysis. This theoretical ease-off topography is modified based on tooth surface deviations and is used to perform a loaded tooth contact analysis according to a semi-analytical method proposed earlier. At the end, two examples, a face-milled hypoid gear set having local deviations and a face-hobbed one having global deviations, are analyzed to demonstrate the effectiveness of the proposed methodology in quantifying the effect of such deviations on the load distribution and the loaded motion transmission error.

Surface design and tooth contact analysis of an innovative modified spur gear with crowned teeth

2005 ◽  
Vol 219 (2) ◽  
pp. 193-207 ◽  
Author(s):  
J-L Li ◽  
S-T Chiou
Keyword(s):  
Gear Tooth ◽  
Point Contact ◽  
Spur Gear ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Surface Design ◽  
Tooth Surfaces ◽  
Meshing Characteristics

An innovative modified spur gear with crowned teeth and its generating mechanism are proposed in this study. The main purpose of tooth surface modification is to change line contact to point contact at the middle of gear tooth surfaces in order to avoid edge contact resulting from possible unavoidable axial misalignment. Moreover, the surface of one gear tooth can be generated with just one cutting process, thereby facilitating easy manufacturing. Based on gearing theory, the model for surface design is developed. A tooth contact analysis (TCA) model for the modified gear pair is also built to investigate meshing characteristics, so that transmission errors (TEs) under assembly errors can also be studied. Examples are included to verify the correctness of the models developed and to demonstrate gear characteristics.

Tooth Contact Analysis of Face Gear Drive Modified by a Grinding Worm

2010 ◽  
Vol 139-141 ◽  
pp. 1154-1157 ◽  
Author(s):  
Hui Guo ◽  
Ning Zhao ◽  
Hao Gao
Keyword(s):  
Gear Tooth ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Alignment Error ◽  
Contact Ratio ◽  
Face Gear ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Gear Drive ◽  
Bearing Contact

This paper proposes a modification method for tooth surface of face gear drive with a grinding worm on a numerical grinding machine. The surface equation of grinding worm is derived, and the coordinate System of generating the worm is established. Tooth contact analysis (TCA) is performed to investigate the performance of face gear drive before and after modification, and the alignment error is considered. This method can obtain a more stable bearing contact in contrast to the method by increasing tooth number of shaper. The longitudinal bearing contact on the face-gear tooth surface has been obtained which will increase the contact ratio. By modification the edge contact at surface edges of the gears can be avoided and the modification magnitude can be controlled freely.

An Ease-Off Based Method for Loaded Tooth Contact Analysis of Hypoid Gears Having Local and Global Surface Deviations

2009 ◽  
Author(s):  
M. Kolivand ◽  
A. Kahraman
Keyword(s):  
Gear Tooth ◽  
Contact Analysis ◽  
Tooth Surface ◽  
Surface Wear ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Hypoid Gears ◽  
Manufacturing Errors ◽  
Spiral Bevel ◽  
Loaded Tooth Contact Analysis

Manufacturing errors typically cause real (measured) spiral bevel and hypoid gear surfaces to deviate from the theoretical ones globally. Tooth surface wear patterns accumulated through the life span of the gear set are typically local deviations that are aggravated especially in case of edge contact conditions. An accurate and practical methodology based on ease-off topography is proposed in this study to perform loaded tooth contact analysis of spiral bevel and hypoid gears having both types of local and global deviations. It starts with definition of the theoretical pinion and gear tooth surfaces from the machine settings and cutter parameters, and constructs the theoretical ease-off and roll angle surfaces to compute unloaded contact analysis. Manufacturing errors and localized surface wear deviations are considered to update the theoretical ease-off to form a new ease-off surface that is used to perform a loaded tooth contact analysis according to the semi-analytical method proposed earlier. At the end, a numerical example with locally deviated surfaces is analyzed to demonstrate the effectiveness of the proposed methodology as well as quantifying the effect of such deviations on load distribution and the loaded motion transmission error.

Stress Analysis of Spherical Gear Sets

2009 ◽  
Author(s):  
Li-Chi Chao ◽  
Chung-Biau Tsay
Keyword(s):  
Gear Tooth ◽  
Three Dimensional ◽  
Contact Analysis ◽  
Design Parameters ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Contact Points ◽  
Tooth Surfaces ◽  
Loaded Tooth Contact Analysis ◽  
Spherical Gear

The spherical gear is a new type of gear proposed by Mitome et al. [1]. Different from that of the conventional spur or helical gear sets, the spherical gear set can allow variable shaft angles and large axial misalignments without gear interference during the gear drive meshing [1, 2]. Geometrically, the spherical gear has two types of gear tooth profiles, the concave tooth and convex tooth. In practical transmission applications, the contact situation of a spherical gear set is very complex. To obtain a more realistic simulation result, the loaded tooth contact analysis (LTCA) has been performed by employing the finite element method (FEM). According to the derived mathematical model of spherical gear tooth surfaces, an automatic meshes generation program for three-dimensional spherical gears has been developed. Beside, tooth contact analysis (TCA) of spherical gears has been performed to simulate the contact points of the spherical gear set. Furthermore, the contact stress contours of spherical gear tooth surfaces and bending stress of tooth roots have been investigated by giving the design parameters, material properties, loadings and boundary conditions of spherical gears.

scholarly journals Tooth contact analysis of spur gears. Part 1-SAM analysis of standard gears

2017 ◽  
Vol 112 ◽  
pp. 07015 ◽  
Author(s):  
Spiridon Creţu ◽  
Nicolae Pop ◽  
Stelian Cazan
Keyword(s):  
Contact Analysis ◽  
Spur Gears ◽  
Tooth Contact Analysis ◽  
Tooth Contact
Sign in / Sign up

Export Citation Format

Share Document