Subgrid Scale Combustion Modeling Based on Stochastic Model Parameterization

Author(s):  
William H. Calhoon ◽  
Andrea C. Zambon ◽  
Balu Sekar ◽  
Barry Kiel

A new modeling formulation for turbulent chemistry interactions in large-eddy simulation (LES) is presented that is based on a unique application of the linear-eddy model (LEM) that includes large scale strain effects. This novel application of the LEM may be used to predict turbulent flame extinction limits due to both small and large scale strain effects. Statistics from this modeling formulation may be used to generate an inexpensive run-time model for LES predictions. This paper presents the LEM modeling formulation and demonstrates the capabilities of the approach for augmenter conditions. A methodology is also presented for formulating an LES-linear-eddy model (LES-LEM) subgrid model based on the simulation data.

Author(s):  
William H. Calhoon ◽  
Andrea C. Zambon ◽  
Balu Sekar ◽  
Barry Kiel

A new modeling formulation for turbulent chemistry interactions in large eddy simulation (LES) is presented that is based on a unique application of the linear-eddy model (LEM) that includes large scale strain effects. This novel application of the LEM may be used to predict turbulent flame extinction limits due to both small and large scale strain effects. Statistics from this modeling formulation may be used to generate an inexpensive run-time model for LES predictions. This paper presents the LEM modeling formulation and demonstrates the capabilities of the approach for augmentor conditions. A methodology is also presented to formulate a LES subgrid model based on the simulation data.


Author(s):  
Sreebash C. Paul ◽  
Manosh C. Paul ◽  
William P. Jones

Formation of nitric oxide (NO) in a model cylindrical combustor is investigated by applying Large Eddy Simulation (LES) technique. Gaseous propane (C3H8) is injected through a circular nozzle attached at the centre of the combustor inlet and preheated air with temperature of 773K is supplied through the annulus surrounding of the nozzle. The non-premixed combustion process is modelled via conserved scalar approach with laminar flamelet model, while in NO formation model, the extended Zeldovich (thermal) reaction mechanism is taken into account through a transport equation for NO mass fraction. In LES the governing equations are filtered using a spatial filtering approach to separate the flow field into large scale eddies and small scale eddies. The large scale eddies are resolved explicitly while the small scale eddies are modelled via Smagorinsky model.


1992 ◽  
Vol 242 ◽  
pp. 51-78 ◽  
Author(s):  
P. J. Mason ◽  
D. J. Thomson

The ability of a large-eddy simulation to represent the large-scale motions in the interior of a turbulent flow is well established. However, concerns remain for the behaviour close to rigid surfaces where, with the exception of low-Reynolds-number flows, the large-eddy description must be matched to some description of the flow in which all except the larger-scale ‘inactive’ motions are averaged. The performance of large-eddy simulations in this near-surface region is investigated and it is pointed out that in previous simulations the mean velocity profile in the matching region has not had a logarithmic form. A number of new simulations are conducted with the Smagorinsky (1963) subgrid model. These also show departures from the logarithmic profile and suggest that it may not be possible to eliminate the error by adjustments of the subgrid lengthscale. An obvious defect of the Smagorinsky model is its failure to represent stochastic subgrid stress variations. It is shown that inclusion of these variations leads to a marked improvement in the near-wall flow simulation. The constant of proportionality between the magnitude of the fluctuations in stress and the Smagorinsky stresses has been empirically determined to give an accurate logarithmic flow profile. This value provides an energy backscatter rate slightly larger than the dissipation rate and equal to idealized theoretical predictions (Chasnov 1991).


2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Chao Yu ◽  
Yiwei Wang ◽  
Chenguang Huang ◽  
Xiaocui Wu ◽  
Tezhuan Du

Unsteady cavitating flows around propellers become increasingly prominent on large-scale and high-speed ships, but large eddy simulations (LES) are limited in the literature. In this study, numerical simulation of an unsteady cavitating flow around a highly skewed propeller in a nonuniform wake is performed based on an explicit LES approach with k−μ subgrid model. Kunz cavitation model, volume of fluid (VOF) method, and a moving mesh scheme are adopted. The predicted evolution of the unsteady cavitating flow around a highly skewed propeller in a nonuniform ship wake is in good agreement with experimental results. An analysis of the factors affecting the cavitation on the propeller is conducted based on numerical simulation. Furthermore, the influences between cavitation structures and vortex structures are also briefly analyzed.


Author(s):  
Suresh Menon ◽  
Sreekanth Pannala

A subgrid scalar mixing and combustion model originally developed for gas phase combustion has been extended to include the liquid phase. This approach includes a more fundamental treatment of the effects of the final stages of droplet vaporization, molecular diffusion, chemical reactions and small scale turbulent mixing than other LES closure techniques. As a result, Reynolds, Schmidt and Damkohler number effects are explicitly included. This model has been implemented within an Eulerian-Lagrangian two phase large-eddy simulation (LES) formulation. In this approach, the liquid droplets are tracked using the Lagrangian approach up to a pre-specified cut-off size. The evaporation of the Lagrangian droplets and the evaporation and mixing of the droplets smaller than the cutoff size is modeled within the subgrid using an Eulerian two-phase model. The issues related to the implementation of this subgrid model within the LES are discussed in this paper along with some preliminary results that demonstrate its capabilities.


2017 ◽  
Vol 17 (11) ◽  
pp. 7261-7276 ◽  
Author(s):  
Tobias Wolf-Grosse ◽  
Igor Esau ◽  
Joachim Reuder

Abstract. Street-level urban air pollution is a challenging concern for modern urban societies. Pollution dispersion models assume that the concentrations decrease monotonically with raising wind speed. This convenient assumption breaks down when applied to flows with local recirculations such as those found in topographically complex coastal areas. This study looks at a practically important and sufficiently common case of air pollution in a coastal valley city. Here, the observed concentrations are determined by the interaction between large-scale topographically forced and local-scale breeze-like recirculations. Analysis of a long observational dataset in Bergen, Norway, revealed that the most extreme cases of recurring wintertime air pollution episodes were accompanied by increased large-scale wind speeds above the valley. Contrary to the theoretical assumption and intuitive expectations, the maximum NO2 concentrations were not found for the lowest 10 m ERA-Interim wind speeds but in situations with wind speeds of 3 m s−1. To explain this phenomenon, we investigated empirical relationships between the large-scale forcing and the local wind and air quality parameters. We conducted 16 large-eddy simulation (LES) experiments with the Parallelised Large-Eddy Simulation Model (PALM) for atmospheric and oceanic flows. The LES accounted for the realistic relief and coastal configuration as well as for the large-scale forcing and local surface condition heterogeneity in Bergen. They revealed that emerging local breeze-like circulations strongly enhance the urban ventilation and dispersion of the air pollutants in situations with weak large-scale winds. Slightly stronger large-scale winds, however, can counteract these local recirculations, leading to enhanced surface air stagnation. Furthermore, this study looks at the concrete impact of the relative configuration of warmer water bodies in the city and the major transport corridor. We found that a relatively small local water body acted as a barrier for the horizontal transport of air pollutants from the largest street in the valley and along the valley bottom, transporting them vertically instead and hence diluting them. We found that the stable stratification accumulates the street-level pollution from the transport corridor in shallow air pockets near the surface. The polluted air pockets are transported by the local recirculations to other less polluted areas with only slow dilution. This combination of relatively long distance and complex transport paths together with weak dispersion is not sufficiently resolved in classical air pollution models. The findings have important implications for the air quality predictions over urban areas. Any prediction not resolving these, or similar local dynamic features, might not be able to correctly simulate the dispersion of pollutants in cities.


2011 ◽  
Vol 47 (9) ◽  
pp. 1197-1208 ◽  
Author(s):  
G. H. Yeoh ◽  
S. C. P. Cheung ◽  
J. Y. Tu ◽  
T. J. Barber

Sign in / Sign up

Export Citation Format

Share Document