Using the Pareto Set Pursuing Multiobjective Optimization Approach for Hybridization of a Plug-In Hybrid Electric Vehicle

2012 ◽  
Vol 134 (9) ◽  
Author(s):  
Shashi K. Shahi ◽  
G. Gary Wang ◽  
Liqiang An ◽  
Eric Bibeau ◽  
Zhila Pirmoradi
Keyword(s):  
Multiobjective Optimization ◽  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Operating Cost ◽  
Pareto Set ◽  
Computational Time ◽  
Design Parameters ◽  
Optimization Approach ◽  
Hybrid Electric

A plug-in hybrid electric vehicle (PHEV) can improve fuel economy and emission reduction significantly compared to hybrid electric vehicles and conventional internal combustion engine (ICE) vehicles. Currently there lacks an efficient and effective approach to identify the optimal combination of the battery pack size, electric motor, and engine for PHEVs in the presence of multiple design objectives such as fuel economy, operating cost, and emission. This work proposes a design approach for optimal PHEV hybridization. Through integrating the Pareto set pursuing (PSP) multiobjective optimization algorithm and powertrain system analysis toolkit (PSAT) simulator on a Toyota Prius PHEV platform, 4480 possible combinations of design parameters (20 batteries, 14 motors, and 16 engines) were explored for PHEV20 and PHEV40 powertrain configurations. The proposed approach yielded the optimal solution in a small fraction of computational time, as compared to an exhaustive search. This confirms the efficiency and applicability of PSP to problems with discrete variables. In the design context we have found that battery, motor, and engine collectively define the optimal hybridization scheme, which also varies with the drive cycle and all electric range (AER). The proposed method and software platform could be applied to optimize other powertrain designs.

Optimal Hybridization of Battery, Engine and Motor for PHEV20

2011 ◽  
Author(s):  
Shashi K. Shahi ◽  
G. Gary Wang ◽  
Liqiang An ◽  
Eric Bibeau
Keyword(s):  
Hybrid Electric Vehicle ◽  
System Analysis ◽  
Operating Cost ◽  
Computational Time ◽  
Design Parameters ◽  
Optimization Approach ◽  
Component Sizing ◽  
Powertrain System ◽  
Hybrid Electric ◽  
Storage Batteries

A plug-in hybrid electric vehicle (PHEV) relies on relatively larger storage batteries than conventional hybrid electric vehicles. The characteristics of PHEV batteries, as well as hybridization of the PHEV battery with the engine and electric motor, play an important role in the design and potential adoption of PHEVs. To exhaustively evaluate all the possible combinations of available types of batteries, motors and engines, the total computational time is prohibitive. This work proposed an integrated optimal design strategy to address this problem. The recently developed Pareto set pursuing (PSP) multi-objective optimization approach is employed to perform optimal hybridization. Each PHEV with chosen battery, motor and engine is designed for optimal component sizing using the Powertrain System Analysis Toolkit (PSAT) software. The methodology is demonstrated with the Toyota Prius PHEV20: PHEV version sized for 20 miles (32.1 km) of all electric range (AER). Fuel economy, operating cost, and green house gases emissions are simultaneously optimized from 4,480 possible combinations of design parameters: 20 batteries, 14 motors, and 16 engines. The hybridization optimization is performed on two different drive cycles—Urban dynamometer driving schedule (UDDS) and Winnipeg weekday duty cycle (WWDC). It was found that battery, motor, and engine work collectively to define an optimal hybridization scheme and the optimal hybridization scheme varies with each driving cycle. The proposed method and software platform could be applied to optimize other powertrain designs.

Rapid optimal design of a multimode power split hybrid electric vehicle transmission

2018 ◽  
Vol 233 (3) ◽  
pp. 740-762 ◽  
Author(s):  
Pier Giuseppe Anselma ◽  
Yi Huo ◽  
Joel Roeleveld ◽  
Ali Emadi ◽  
Giovanni Belingardi
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Design Methodology ◽  
Planetary Gear ◽  
Optimal Designs ◽  
Design Parameters ◽  
Power Split ◽  
Planetary Gear Sets ◽  
Hybrid Electric

This work aims at presenting a design methodology capable of modeling, generating, and testing a large number of multimode power split hybrid electric vehicle transmission designs in a relatively short period of time. Design parameters include the planetary gear ratios, the final drive ratio, the configuration of hookups to link the hybrid powertrain components to the planetary gear sets and the locations of clutch connections between different nodes of the planetary gear sets. The system modeling approach is first presented, including formulations for each component (the vehicle and road load, the engine, the motor/generators and the battery). A rapid and automated modeling procedure is proposed for hybrid electric vehicle transmissions including multiple planetary gear sets and clutch connections. Two algorithms are subsequently presented that enable fast evaluation of fuel economy and acceleration performance of hybrid electric vehicle transmission designs, namely the enhanced Power-Weighted Efficiency Analysis for Rapid Sizing and the Rapid Efficiency-based Launching Performance Analysis algorithms. The developed design methodology is tested by first modeling and evaluating three hybrid electric vehicle designs from the state-of-art. Later, an investigation for optimal designs that can ameliorate the examined benchmarks is performed. Several millions of design options are rapidly generated and tested using the proposed procedure. The methodology is proved effective by quickly coming up with two sub-optimal designs. Fuel economy and acceleration performance are improved by 5.56% and 40.56%, respectively, compared to the corresponding best benchmarks.

Match and Optimization of Series Hybrid Bus Powertrain Parameters

2011 ◽  
Vol 121-126 ◽  
pp. 2710-2714
Author(s):  
Ling Cai ◽  
Xin Zhang
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Simulation Platform ◽  
Optimal Method ◽  
Orthogonal Method ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Bus ◽  
Promising Solution ◽  
Hybrid Electric

With the requirements for reducing emissions and improving fuel economy, it has been recognized that the electric, hybrid electric powered drive train technologies are the most promising solution to the problem of land transportation in the future. In this paper, the parameters of series hybrid electric vehicle (SHEV), including engine-motor, battery and transmission, are calculated and matched. Advisor software is chosen as the simulation platform, and the major four parameters are optimized in orthogonal method. The results show that the optimal method and the parameters can improve the fuel economy greatly.

An adaptive equivalent consumption minimization strategy considering catalyst temperature for plug-in hybrid electric vehicle

2021 ◽  
pp. 095440702110434
Author(s):  
Tao Deng ◽  
Ke Zhao ◽  
Haoyuan Yu
Keyword(s):  
Fuel Consumption ◽  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Test Procedure ◽  
Catalyst Temperature ◽  
Equivalent Factor ◽  
Simulation Results ◽  
Hybrid Electric ◽  
Equivalent Consumption Minimization Strategy

In the process of sufficiently considering fuel economy of plug-in hybrid electric vehicle (PHEV), the working time of engine will be reduced accordingly. The increased frequency that the three-way catalytic converter (TWCC) works in abnormal operating temperature will lead to the increasing of emissions. This paper proposes the equivalent consumption minimization strategy (ECMS) to ensure the catalyst temperature of PHEV can work in highly efficient areas, and the influence of catalyst temperature on fuel economy and emissions is considered. The simulation results show that the fixed equivalent factor of ECMS has great limitations for the underutilized battery power and the poor fuel economy. In order to further reduce fuel consumption and keep the emission unchanged, an equivalent factor map based on initial state of charge (SOC) and vehicle mileage is established by the genetic algorithm. Furthermore, an Adaptive changing equivalent factor is achieved by using the following strategy of SOC trajectory. Ultimately, adaptive equivalent consumption minimization strategy (A-ECMS) considering catalyst temperature is proposed. The simulation results show that compared with ordinary ECMS, HC, CO, and NOX are reduced by 14.6%, 20.3%, and 25.8%, respectively, which effectively reduces emissions. But the fuel consumption is increased by only 2.3%. To show that the proposed method can be used in actual driving conditions, it is tested on the World Light Vehicle Test Procedure (WLTC).

scholarly journals Reducing Mobile Air Conditioner (MAC) Power Consumption Using Active Cabin-Air-Recirculation in A Plug-In Hybrid Electric Vehicle (PHEV)

2018 ◽  
Vol 9 (4) ◽  
pp. 51 ◽  
Author(s):  
Chengguo Li ◽  
Eli Brewer ◽  
Liem Pham ◽  
Heejung Jung
Keyword(s):  
Air Quality ◽  
Power Consumption ◽  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Driving Cycle ◽  
Total Power ◽  
Air Conditioner ◽  
Hybrid Electric ◽  
Cabin Air Quality

Air conditioner power consumption accounts for a large fraction of the total power used by hybrid and electric vehicles. This study examined the effects of three different cabin air ventilation settings on mobile air conditioner (MAC) power consumption, such as fresh mode with air conditioner on (ACF), fresh mode with air conditioner off (ACO), and air recirculation mode with air conditioner on (ACR). Tests were carried out for both indoor chassis dynamometer and on-road tests using a 2012 Toyota Prius plug-in hybrid electric vehicle. Real-time power consumption and fuel economy were calculated from On-Board Diagnostic-II (OBD-II) data and compared with results from the carbon balance method. MAC consumed 28.4% of the total vehicle power in ACR mode when tested with the Supplemental Federal Test Procedure (SFTP) SC03 driving cycle on the dynamometer, which was 6.1% less than in ACF mode. On the other hand, ACR and ACF mode did not show significant differences for the less aggressive on-road tests. This is likely due to the significantly lower driving loads experienced in the local driving route compared to the SC03 driving cycle. On-road and SC03 test results suggested that more aggressive driving tends to magnify the effects of the vehicle HVAC (heating, ventilation, and air conditioning) system settings. ACR conditions improved relative fuel economy (or vehicle energy efficiency) to that of ACO conditions by ~20% and ~8% compared to ACF conditions for SC03 and on-road tests, respectively. Furthermore, vehicle cabin air quality was measured and analyzed for the on-road tests. ACR conditions significantly reduced in-cabin particle concentrations, in terms of aerosol diffusion charger signal, by 92% compared to outside ambient conditions. These results indicate that cabin air recirculation is a promising method to improve vehicle fuel economy and improve cabin air quality.

scholarly journals Modeling and energy management strategy research of a power-split hybrid electric vehicle

2020 ◽  
Vol 12 (10) ◽  
pp. 168781402096262
Author(s):  
Yupeng Zou ◽  
Ruchen Huang ◽  
Xiangshu Wu ◽  
Baolong Zhang ◽  
Qiang Zhang ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Energy Management ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Research Work ◽  
Energy Management Strategy ◽  
Power Sources ◽  
Power Split ◽  
Hybrid Electric ◽  
The Impact

A power-split hybrid electric vehicle with a dual-planetary gearset is researched in this paper. Based on the lever analogy method of planetary gearsets, the power-split device is theoretically modeled, and the driveline simulation model is built by using vehicle modeling and simulation toolboxes in MATLAB. Six operation modes of the vehicle are discussed in detail, and the kinematic constraint behavior of power sources are analyzed. To verify the rationality of the modeling, a rule-based control strategy (RB) and an adaptive equivalent consumption minimization strategy (A-ECMS) are designed based on the finite state machine and MATLAB language respectively. In order to demonstrate the superiority of A-ECMS in fuel-saving and to explore the impact of different energy management strategies on emission, fuel economy and emission performance of the vehicle are simulated and analyzed under UDDS driving cycle. The simulation results of the two strategies are compared in the end, shows that the modeling is rational, and compared with RB strategy, A-ECMS ensures charge sustaining better, enables power sources to work in more efficient areas, and improves fuel economy by 8.65%, but significantly increases NOx emissions, which will be the focus of the next research work.

scholarly journals Real-Time Co-optimization of Vehicle Route and Speed Using Generic Algorithm for Improved Fuel Economy

2019 ◽  
Vol 141 (03) ◽  
pp. S08-S15
Author(s):  
Guoming G. Zhu ◽  
Chengsheng Miao
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Fuel Economy ◽  
Autonomous Vehicles ◽  
Hybrid Electric Vehicle ◽  
High Efficiency ◽  
Combustion Engine ◽  
Cruise Control ◽  
Vehicle Performance ◽  
Hybrid Electric

Making future vehicles intelligent with improved fuel economy and satisfactory emissions are the main drivers for current vehicle research and development. The connected and autonomous vehicles still need years or decades to be widely used in practice. However, some advanced technologies have been developed and deployed for the conventional vehicles to improve the vehicle performance and safety, such as adaptive cruise control (ACC), automatic parking, automatic lane keeping, active safety, super cruise, and so on. On the other hand, the vehicle propulsion system technologies, such as clean and high efficiency combustion, hybrid electric vehicle (HEV), and electric vehicle, are continuously advancing to improve fuel economy with satisfactory emissions for traditional internal combustion engine powered and hybrid electric vehicles or to increase cruise range for electric vehicles.

Sign in / Sign up

Export Citation Format

Share Document