Match and Optimization of Series Hybrid Bus Powertrain Parameters

2011 ◽  
Vol 121-126 ◽  
pp. 2710-2714
Author(s):  
Ling Cai ◽  
Xin Zhang
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Simulation Platform ◽  
Optimal Method ◽  
Orthogonal Method ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Bus ◽  
Promising Solution ◽  
Hybrid Electric

With the requirements for reducing emissions and improving fuel economy, it has been recognized that the electric, hybrid electric powered drive train technologies are the most promising solution to the problem of land transportation in the future. In this paper, the parameters of series hybrid electric vehicle (SHEV), including engine-motor, battery and transmission, are calculated and matched. Advisor software is chosen as the simulation platform, and the major four parameters are optimized in orthogonal method. The results show that the optimal method and the parameters can improve the fuel economy greatly.

Design and optimization of a modified series hybrid electric vehicle powertrain

2018 ◽  
Vol 233 (6) ◽  
pp. 1419-1435 ◽  
Author(s):  
Swagata Borthakur ◽  
Shankar C Subramanian
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Operating Efficiency ◽  
Traction Motor ◽  
Vehicle Performance ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Electric ◽  
Vehicle Powertrain

Hybrid electric vehicles are emerging technologies that are considered as eco-friendly alternative solutions to internal combustion engine–driven vehicles. This paper proposes a modified hybrid electric vehicle powertrain system that addresses the shortcomings of a series hybrid electric vehicle powertrain. The proposed configuration replaces the conventional generator of a series hybrid electric vehicle with an integrated starter generator that supports the traction motor of the vehicle during acceleration and peak torque requirements and maintains the state of charge of the batteries to provide an extended electric range of the vehicle. The work done in this paper can be categorized into two stages. The first stage is the methodical development of the powertrain in terms of initial parameter matching and sizing of the vehicle components by considering the fundamentals of longitudinal vehicle dynamics. The second stage describes the optimization of the proposed configuration to meet the design objective of maximizing fuel economy subjected to a set of vehicle performance constraints. The performance of the proposed powertrain was evaluated and compared with a series hybrid electric vehicle powertrain for an on-road Indian driving cycle using AVL CRUISE, which is a commercially available software for the study and analysis of road vehicle powertrains. Result analysis during initial parameterization showed a reduction in gross vehicle weight of the proposed configuration by 244 kg (1.5%) and an improvement in the average operating efficiency of the traction motor by around 11%, when compared to a series hybrid electric vehicle. Furthermore, the optimization results for the proposed configuration established an improvement in the fuel economy by 21% while meeting vehicle performance requirements.

An adaptive equivalent consumption minimization strategy considering catalyst temperature for plug-in hybrid electric vehicle

2021 ◽  
pp. 095440702110434
Author(s):  
Tao Deng ◽  
Ke Zhao ◽  
Haoyuan Yu
Keyword(s):  
Fuel Consumption ◽  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Test Procedure ◽  
Catalyst Temperature ◽  
Equivalent Factor ◽  
Simulation Results ◽  
Hybrid Electric ◽  
Equivalent Consumption Minimization Strategy

In the process of sufficiently considering fuel economy of plug-in hybrid electric vehicle (PHEV), the working time of engine will be reduced accordingly. The increased frequency that the three-way catalytic converter (TWCC) works in abnormal operating temperature will lead to the increasing of emissions. This paper proposes the equivalent consumption minimization strategy (ECMS) to ensure the catalyst temperature of PHEV can work in highly efficient areas, and the influence of catalyst temperature on fuel economy and emissions is considered. The simulation results show that the fixed equivalent factor of ECMS has great limitations for the underutilized battery power and the poor fuel economy. In order to further reduce fuel consumption and keep the emission unchanged, an equivalent factor map based on initial state of charge (SOC) and vehicle mileage is established by the genetic algorithm. Furthermore, an Adaptive changing equivalent factor is achieved by using the following strategy of SOC trajectory. Ultimately, adaptive equivalent consumption minimization strategy (A-ECMS) considering catalyst temperature is proposed. The simulation results show that compared with ordinary ECMS, HC, CO, and NOX are reduced by 14.6%, 20.3%, and 25.8%, respectively, which effectively reduces emissions. But the fuel consumption is increased by only 2.3%. To show that the proposed method can be used in actual driving conditions, it is tested on the World Light Vehicle Test Procedure (WLTC).

scholarly journals Reducing Mobile Air Conditioner (MAC) Power Consumption Using Active Cabin-Air-Recirculation in A Plug-In Hybrid Electric Vehicle (PHEV)

2018 ◽  
Vol 9 (4) ◽  
pp. 51 ◽  
Author(s):  
Chengguo Li ◽  
Eli Brewer ◽  
Liem Pham ◽  
Heejung Jung
Keyword(s):  
Air Quality ◽  
Power Consumption ◽  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Driving Cycle ◽  
Total Power ◽  
Air Conditioner ◽  
Hybrid Electric ◽  
Cabin Air Quality

Air conditioner power consumption accounts for a large fraction of the total power used by hybrid and electric vehicles. This study examined the effects of three different cabin air ventilation settings on mobile air conditioner (MAC) power consumption, such as fresh mode with air conditioner on (ACF), fresh mode with air conditioner off (ACO), and air recirculation mode with air conditioner on (ACR). Tests were carried out for both indoor chassis dynamometer and on-road tests using a 2012 Toyota Prius plug-in hybrid electric vehicle. Real-time power consumption and fuel economy were calculated from On-Board Diagnostic-II (OBD-II) data and compared with results from the carbon balance method. MAC consumed 28.4% of the total vehicle power in ACR mode when tested with the Supplemental Federal Test Procedure (SFTP) SC03 driving cycle on the dynamometer, which was 6.1% less than in ACF mode. On the other hand, ACR and ACF mode did not show significant differences for the less aggressive on-road tests. This is likely due to the significantly lower driving loads experienced in the local driving route compared to the SC03 driving cycle. On-road and SC03 test results suggested that more aggressive driving tends to magnify the effects of the vehicle HVAC (heating, ventilation, and air conditioning) system settings. ACR conditions improved relative fuel economy (or vehicle energy efficiency) to that of ACO conditions by ~20% and ~8% compared to ACF conditions for SC03 and on-road tests, respectively. Furthermore, vehicle cabin air quality was measured and analyzed for the on-road tests. ACR conditions significantly reduced in-cabin particle concentrations, in terms of aerosol diffusion charger signal, by 92% compared to outside ambient conditions. These results indicate that cabin air recirculation is a promising method to improve vehicle fuel economy and improve cabin air quality.

Sign in / Sign up

Export Citation Format

Share Document