The New Equations for “Rate-Determining Chemisorption of Coal”

2018 ◽  
Vol 140 (11) ◽  
Author(s):  
Cemil Koyunoğlu

The purpose of the new formulas, Cml, CmlK, and CmlY, which express the slowest char combustion rate, is to show the controlling mechanism of single coal burning. Oxygen diffusion through the boundary layer (as a result of releasing volatile matter from coal) to the char surface is the slowest step rate and can also represent as the rate determining. This step has not yet been taken into account in the literature and may effect incomparable decisions between numerical and experimental results of coal combustion studies. In the 1920s, Wilhelm Nusselt found the coal combustion equation for a single coal, which is based on initial coal diameter, and its burning time, or Nusselt square law (NSL). Also, the burning constant in NSL expressed oxygen partial pressure and the ambient temperature level. Nevertheless, recent studies according to char combustion have explained the effect of coal density on char combustion. Consequently, to help understand the slowest rate of char combustion, NSL as well as ordinary char combustion equations can be used together to establish the rate-determining factor. For this purpose, in this study, the slowest step of the char reaction rate is given as “Cml” of stable position for single coal particle, “CmlK” and “CmlY” for a coal particle in a motion.

2005 ◽  
Vol 29 (12) ◽  
pp. 1321-1328
Author(s):  
Chong-Pyo Cho ◽  
Ho-Young Kim ◽  
Jin-Taek Chung

2013 ◽  
Vol 34 (3) ◽  
pp. 337-346 ◽  
Author(s):  
Wojciech Moroń ◽  
Krzysztof Czajka ◽  
Wiesław Ferens ◽  
Konrad Babul ◽  
Arkadiusz Szydełko ◽  
...  

Abstract The paper presents results of coal behaviour during combustion in oxy-fuel atmosphere. The experiment was performed using 3 meter long Entrained Flow Reactor and 1 meter long Drop Tube Reactor. Three hard coals and two lignites were analysed in order to investigate NOx, SO2 emission and fly ash burnout. The measurements were performed along and at the outlet of a combustion chamber for one- and two - stage combustion. In the second stage of the experiment, kinetic parameters for nitrogen evolution during combustion in oxy - fuel and air were calculated and the division of nitrogen into the volatile matter and the char was measured. The conducted experiment showed that emissions in oxy - fuel are lower than those in air.


Author(s):  
Asri Gani ◽  
Ichiro Naruse

Co-combustion technologies of coal with biomass have been applied in many practical coal combustion boilers in order to reduce CO2 emission, fuel cost and so forth. Furthermore, the biomass may be able to enhance the combustion performance and to control NOx and N2O emissions since the biomass contains high volatile matter and evolves NH3 as the main volatile N-species. This study focuses on NOx and N2O emission characteristics during co-combustion of coal with biomass. The main results obtained show that emission amount of NO and N2O during co-combustion is relatively more than that during coal combustion. At least, NO behavior can be simulated by the homogeneous reaction scheme relating to NOx even at constant temperature. However, the N2O behavior will be influenced by heterogeneous schemes due to char particles during co-combustion.


2013 ◽  
Vol 815 ◽  
pp. 25-30 ◽  
Author(s):  
Xin Xin Cao ◽  
Fu Sheng Yang ◽  
Zhen Wu ◽  
Yu Qi Wang ◽  
Zao Xiao Zhang

LaNi5 alloy is one of the promising materials for hydrogen storage. It has good activation property, fast reaction rate and moderate plateau pressure. However, some of its hydrogen storage properties will change after repeated hydriding/dehydriding cycles, which limits its practical application. Therefore, this paper investigated the cycling properties of LaNi5 alloy by volumetric method. The results showed that the reaction rate increased with cycling. The hydriding/dehydriding hydrogen content decreased with cycling. For hydriding reaction, the equilibrium pressure increased with cycling, while it decreased for dehydriding at 40°C and 60°C. After 100 cycles, the LaNi5 alloy has been severely pulverized and oxygenated. The oxidation products include LaNiO2, La2NiO4, La2NiO4.18 and LaNiO3. The JMA model was found to fit the kinetic data well, suggesting a nucleation and growth controlling mechanism. The intrinsic reaction rate constant ka increases from 21.87 s-1to 24.81 s-1, while the activation energy decreases from the initial value of 19459 to 19373 J/mol after 100 cycles.


Author(s):  
Xingxing Cheng ◽  
Yilan Xu ◽  
Junge Li ◽  
Zhiqiang Wang ◽  
Chunyuan Ma

Abstract Mass transfer is very important for the combustion of biomass fuels, especially pellets. The oxygen diffusion, which results in a nonuniform distribution of oxygen in the pellets, should be considered in the modeling of pellet combustion. In this study, the effect of oxygen on thermal degradation of biomass is studied by thermogravimetric (TG) experiments and then a kinetic model considering oxygen effect is developed. The fuels investigated are spruce, sophora, wheat straw, and peanut straw. TG curves are taken under different oxygen concentrations, ranging from 0 to 20 %. Oxygen concentration has little effect on the devolatilization but is critical for the behavior of char combustion. Reaction mechanism is proposed based on the observation of decomposition at different reaction conditions. The kinetic model consists of three devolatilization reactions (for cellulose, hemicellulose, and lignin) and one char combustion reaction. In the devolatilization steps, char and gas are formed as products and oxygen is not involved in the reactions. A power law dependence of oxygen is assumed for the char combustion stage. The model parameters are fitted by the experimental TG data and good agreement is observed between the experimental and modeled data at various oxygen concentrations and for different biomass fuels. It is expected that the developed kinetic model could be applied for the modeling of pellets combustion considering oxygen diffusion process.


Sign in / Sign up

Export Citation Format

Share Document