Correlations for the Prediction of Intermittency and Turbulent Spot Production Rate in Separated Flows

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
M. Dellacasagrande ◽  
R. Guida ◽  
D. Lengani ◽  
D. Simoni ◽  
M. Ubaldi ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Production Rate ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Turbine Blades ◽  
Transition Process ◽  
Separated Flows ◽  
Intensity Level ◽  
Turbulent Spot ◽  
Free Stream Turbulence

Experimental data describing laminar separation bubbles developing under strong adverse pressure gradients, typical of ultra-high-lift turbine blades, have been analyzed to define empirical correlations able to predict the main features of the separated flow transition. Tests have been performed for three different Reynolds numbers and three different free-stream turbulence intensity levels. For each condition, around 4000 particle image velocimetry (PIV) snapshots have been acquired. A wavelet-based intermittency detection technique, able to identify the large scale vortices shed as a consequence of the separation, has been applied to the large amount of data to efficiently compute the intermittency function for the different conditions. The transition onset and end positions, as well as the turbulent spot production rate, are evaluated. Thanks to the recent advancements in the understanding on the role played by Reynolds number and free-stream turbulence intensity on the dynamics leading to transition in separated flows, guest functions are proposed in the paper to fit the data. The proposed functions are able to mimic the effects of Reynolds number and free-stream turbulence intensity level on the receptivity process of the boundary layer in the attached part, on the disturbance exponential growth rate observed in the linear stability region of the separated shear layer, as well as on the nonlinear later stage of completing transition. Once identified the structure of the correlation functions, a fitting process with own and literature data allowed us to calibrate the unknown constants. Results reported in the paper show the ability of the proposed correlations to adequately predict the transition process in the case of separated flows. The correlation for the spot production rate here proposed extends the correlations proposed in literature for attached (by-pass like) transition process, and could be used in γ–Reϑ codes, where the spot production rate appears as a source term in the intermittency function transport equation.

Correlations for the Prediction of Intermittency and Turbulent Spot Production Rate in Separated Flows

2018 ◽  
Author(s):  
M. Dellacasagrande ◽  
R. Guida ◽  
D. Lengani ◽  
D. Simoni ◽  
M. Ubaldi ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Production Rate ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Turbine Blades ◽  
Transition Process ◽  
Separated Flows ◽  
Intensity Level ◽  
Turbulent Spot ◽  
Free Stream Turbulence

Experimental data describing laminar separation bubbles developing under strong adverse pressure gradients, typical of Ultra-High-Lift turbine blades, have been analyzed to define empirical correlations able to predict the main features of the separated flow transition. Tests have been performed for three different Reynolds numbers and three different free-stream turbulence intensity levels. For each condition, around 4000 Particle Image Velocimetry (PIV) snapshots have been acquired. A wavelet based intermittency detection technique, able to identify the large scale vortices shed as a consequence of the separation, has been applied to the large amount of data to efficiently compute the intermittency function for the different conditions. The transition onset and end positions, as well as the turbulent spot production rate are evaluated. Thanks to the recent advancements in the understanding on the role played by Reynolds number and free-stream turbulence intensity on the dynamics leading to transition in separated flows, guest functions are proposed in the paper to fit the data. The proposed functions are able to mimic the effects of Reynolds number and free-stream turbulence intensity level on the receptivity process of the boundary layer in the attached part, on the disturbance exponential growth rate observed in the linear stability region of the separated shear layer, as well as on the nonlinear later stage of completing transition. Once identified the structure of the correlation functions, a fitting process with own and literature data allowed us to calibrate the unknown constants. Results reported in the paper show the ability of the proposed correlations to adequately predict the transition process in the case of separated flows. The correlation for the spot production rate here proposed extends the correlations proposed in liter-ature for attached (by-pass like) transition process, and could be used in γ–Reϑ codes, where the spot production rate appears as a source term in the intermittency function transport equation.

Evaluation of Turbulent Spot Production Rate in Boundary Layers Under Variable Pressure Gradients for Gas Turbine Applications

2019 ◽  
Author(s):  
M. Dellacasagrande ◽  
D. Lengani ◽  
D. Simoni ◽  
M. Ubaldi ◽  
P. Zunino
Keyword(s):  
Reynolds Number ◽  
Production Rate ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Separated Flow ◽  
Pressure Gradients ◽  
Turbulent Spot ◽  
Free Stream Turbulence ◽  
Flow Parameters ◽  
Transition Length

Abstract The paper presents an experimental data base on transitional boundary layers developing on a flat plate installed within a variable area opening endwall channel. Measurements have been carried out by means of time-resolved PIV. The overall test matrix spans 3 Reynolds numbers, 4 free-stream turbulence intensity levels and 4 different flow adverse pressure gradients. For each condition, 16000 instantaneous flow fields have been acquired in order to obtain high statistical accuracy. The flow parameters have been varied in order to provide a gradual shift of the mode of transition from a bypass process occurring with mild adverse pressure gradients at high free-stream turbulence, to separated flow transition, occurring with low Reynolds number, low free-stream turbulence intensity and elevated adverse pressure gradient. In order to quantify the influence of the flow parameter variation on the boundary layer transition process, the transition onset and end positions, and the turbulent spot production rate have been evaluated with a wavelet based intermittency detection technique. This post-processing technique is in fact able to identify the vortical structures developing within the boundary layer, the intermittency function is then automatically evaluated for each tested condition counting the number of such structures and defining the cumulative probability function. The by-pass transition mode has the longest transition length that decreases with increasing the Reynolds number. The transition length of the separated flow case is smaller than the by-pass one, and the variation of the flow parameters has a similar impact. Similarly, the dimensionless turbulent spot production rate reduces when the Reynolds number is increasing. The variation of the inlet turbulence intensity has a small influence on this parameter except for the condition at the highest turbulence intensity, that always shows the lowest turbulent spot production rate because a by-pass type transition occurs. This large amount of data has been used to develop new correlations used to predict the spot production rate and the transition length in attached and separated flows.

Effects of Reynolds Number and Free-Stream Turbulence on Turbine Tip Clearance Flow

2005 ◽  
Author(s):  
Takayuki Matsunuma
Keyword(s):  
Reynolds Number ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Three Dimensional ◽  
Tip Clearance ◽  
Turbine Cascade ◽  
Tip Leakage Flow ◽  
Three Dimensional Flow ◽  
Free Stream Turbulence ◽  
Dimensional Flow

Tip clearance losses represent a major efficiency penalty of turbine blades. This paper describes the effect of tip clearance on the aerodynamic characteristics of an unshrouded axial-flow turbine cascade under very low Reynolds number conditions. The Reynolds number based on the true chord length and exit velocity of the turbine cascade was varied from 4.4 × 104 to 26.6 × 104 by changing the velocity of fluid flow. The free-stream turbulence intensity was varied between 0.5% and 4.1% by modifying turbulence generation sheet settings. Three-dimensional flow fields at the exit of the turbine cascade were measured both with and without tip clearance using a five-hole pressure probe. Tip leakage flow generated a large high total pressure loss region. Variations in the Reynolds number and free-stream turbulence intensity changed the distributions of three-dimensional flow, but had no effect on the mass-averaged tip clearance loss of the turbine cascade.

scholarly journals A Theory for Predicting the Turbulent-Spot Production Rate

1998 ◽  
Author(s):  
R. E. Mayle
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Free Stream ◽  
Length Scale ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Turbulent Spot ◽  
Boundary Layer Flows ◽  
Free Stream Turbulence ◽  
New Correlation

A theory is presented for predicting the production rate of turbulent spots. The theory, based on that by Mayle-Schulz for bypass transition, leads to a new correlation for the spot production rate in boundary layer flows with a zero pressure gradient. The correlation, which agrees reasonably well with data, clearly shows the effects of both free-stream turbulence level and length scale. In addition, the theory provides an estimate for the lowest level of free-stream turbulence causing bypass transition.

A Theory for Predicting the Turbulent-Spot Production Rate

1999 ◽  
Vol 121 (3) ◽  
pp. 588-593 ◽  
Author(s):  
R. E. Mayle
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Free Stream ◽  
Length Scale ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Turbulent Spot ◽  
Boundary Layer Flows ◽  
Free Stream Turbulence ◽  
New Correlation

A theory is presented for predicting the production rate of turbulent spots. The theory, based on that by Mayle–Schulz for bypass transition, leads to a new correlation for the spot production rate in boundary layer flows with a zero pressure gradient. The correlation, which agrees reasonably well with data, clearly shows the effects of both free-stream turbulence level and length scale. In addition, the theory provides an estimate for the lowest level of free-stream turbulence causing bypass transition.

Effect of Free-Stream Turbulence on Characteristics of Fluctuating Forces Acting on Two Square Prisms in Tandem Arrangement

1988 ◽  
Vol 110 (2) ◽  
pp. 140-146 ◽  
Author(s):  
H. Sakamoto ◽  
H. Haniu
Keyword(s):  
Reynolds Number ◽  
Strouhal Number ◽  
Turbulence Intensity ◽  
Vortex Shedding ◽  
Free Stream ◽  
Switching Frequency ◽  
Tandem Arrangement ◽  
Free Stream Turbulence ◽  
Fluid Forces ◽  
Bistable Flow

The effect of the addition of the turbulence intensity to the free stream on the characteristics of the bistable flow which takes place around two square prisms in tandem arrangement was studied experimentally at a Reynolds number of 3.32 × 104. A method of obtaining the fluid forces acting on two prisms in the bistable flow regimes where two flow patterns appear intermittently was introduced, and then the characteristics of the fluid forces, the Strouhal number, and the switching frequency of the switch phenomenon with the variation of the freestream turbulence intensity were investigated. Furthermore, the behavior of the fluid forces and the vortex shedding for other spacings between the two prisms were presented for the variation of the turbulence intensity.

Effects of Periodic Unsteadiness, Free-Stream Turbulence, and Flow Reynolds Number on Separation-Bubble Transition

2003 ◽  
Author(s):  
S. K. Roberts ◽  
M. I. Yaras
Keyword(s):  
Reynolds Number ◽  
Free Stream ◽  
Separation Bubble ◽  
Turbine Blades ◽  
Separated Flow ◽  
Suction Side ◽  
Streamwise Velocity ◽  
Flow Transition ◽  
Free Stream Turbulence ◽  
Flow Reynolds Number

This paper presents measurements of the combined effects of free-stream turbulence and periodic streamwise velocity variations on separation-bubble transition. The measurements were performed on a flat plate at two values of flow Reynolds number, with a streamwise pressure distribution similar to those encountered on the suction side of axial turbine blades. The experiment was designed to facilitate independent control of turbulence and periodic velocity fluctuations in the free-stream. The free-stream turbulence intensity was varied from 0.4% to 4.5%, and the periodic unsteadiness corresponded to Strouhal numbers of 0.0, 2.4 and 4.0. Based on the results, the relative importance of free-stream turbulence and periodic unsteadiness on the streamwise locations of separation, transition and reattachment points are quantified. Existing mathematical models for predicting separated-flow transition and reattachment are then evaluated in this context.

Measurements in a Turbine Cascade Flow Under Ultra Low Reynolds Number Conditions

2001 ◽  
Vol 124 (1) ◽  
pp. 100-106 ◽  
Author(s):  
Kenneth W. Van Treuren ◽  
Terrence Simon ◽  
Marc von Koller ◽  
Aaron R. Byerley ◽  
James W. Baughn ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Reynolds Numbers ◽  
Vortex Generators ◽  
Separation Region ◽  
Suction Surface ◽  
Low Reynolds Numbers ◽  
Free Stream Turbulence ◽  
Low Reynolds

With the new generation of gas turbine engines, low Reynolds number flows have become increasingly important. Designers must properly account for transition from laminar to turbulent flow and separation of the flow from the suction surface, which is strongly dependent upon transition. Of interest to industry are Reynolds numbers based upon suction surface length and flow exit velocity below 150,000 and as low as 25,000. In this paper, the extreme low end of this Reynolds number range is documented by way of pressure distributions, loss coefficients, and identification of separation zones. Reynolds numbers of 25,000 and 50,000 and with 1 percent and 8-9 percent turbulence intensity of the approach flow (free-stream turbulence intensity, FSTI) were investigated. At 25,000 Reynolds number and low FSTI, the suction surface displayed a strong and steady separation region. Raising the turbulence intensity resulted in a very unsteady separation region of nearly the same size on the suction surface. Vortex generators were added to the suction surface, but they appeared to do very little at this Reynolds number. At the higher Reynolds number of 50,000, the low-FSTI case was strongly separated on the downstream portion of the suction surface. The separation zone was eliminated when the turbulence level was increased to 8-9 percent. Vortex generators were added to the suction surface of the low-FSTI case. In this instance, the vortices were able to provide the mixing needed to re-establish flow attachment. This paper shows that massive separation at very low Reynolds numbers (25,000) is persistent, in spite of elevated FSTI and added vortices. However, at a higher Reynolds number, there is opportunity for flow reattachment either with elevated free-stream turbulence or with added vortices. This may be the first documentation of flow behavior at such low Reynolds numbers. Although it is undesirable to operate under these conditions, it is important to know what to expect and how performance may be improved if such conditions are unavoidable.

Leading Edge Separation Bubbles on Turbomachine Blades

1995 ◽  
Vol 117 (1) ◽  
pp. 115-125 ◽  
Author(s):  
R. E. Walraevens ◽  
N. A. Cumpsty
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Free Stream ◽  
Turbine Blades ◽  
Leading Edge ◽  
Compressor Blades ◽  
Free Stream Turbulence ◽  
Pressure Distributions ◽  
Small Influence ◽  
Separation Bubbles

Results are presented for separation bubbles of the type that can form near the leading edges of thin compressor or turbine blades. These often occur when the incidence is such that the stagnation point is not on the nose of the aerofoil. Tests were carried out at low speed on a single aerofoil to simulate the range of conditions found on compressor blades. Both circular and elliptic shapes of leading edge were tested. Results are presented for a range of incidence, Reynolds number, and turbulence intensity and scale. The principal quantitative measurements presented are the pressure distributions in the leading edge and bubble region, as well as the boundary layer properties at a fixed distance downstream, where most of the flows had reattached. Reynolds number was found to have a comparatively small influence, but a raised level of free-stream turbulence has a striking effect, shortening or eliminating the bubble and increasing the magnitude of the suction spike. Increased free-stream turbulence also reduces the boundary layer thickness and shape parameter after the bubble. Some explanations of the processes are outlined.

Sign in / Sign up

Export Citation Format

Share Document