Relationship Between Pressure Drop and Heat Transfer of Fully Developed Flow in Smooth Horizontal Circular Tubes and Spiral Coiled Tubes in the Laminar Flow Regime

2021 ◽  
Author(s):  
Rahul H Patil ◽  
Mandar V Tendolkar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Laminar Flow ◽  
Flow Regime ◽  
Length Ratio ◽  
Dimensionless Group ◽  
Laminar Flow Regime ◽  
Friction Factors ◽  
Flow Through ◽  
Spiral Coils

Abstract Studies on isothermal steady state frictional pressure drop for flow of petroleum base oil SN70, SN150, Diesel and water are carried out in spiral coils with diameter to length ratio, 0.00042, 0.00047, 0.00073, 0.00164, 0.00189, 0.003 and 0.0037. An attempt is made to correlate friction factors with a better and more appropriate dimensionless group for flow of Newtonian fluids through spiral coiled tubes. An innovative approach of correlating heat transfer data with the newly established dimensionless group is presented. Heat transfer experiments are performed for spiral coils with diameter to length ratio 0.000474, 0.00042, 0.001896, 0.00198, 0.000942, 0.00164 in laminar flow regime. Suitable correlations for friction factors and Nusselt numbers are proposed. Relationship between pressure drop and heat transfer is studied. The incapability of the conventional analogy equations to estimate the heat and momentum transfer coefficients for laminar flow through straight or curved tubes is explained based on the viscous and form drag existing in straight and curved pipe flow. The limitations of the existing analogy equations are examined critically. A new general analogy equation is derived for laminar flow through spiral and straight tubes considering the influencing geometrical parameters of the tube. Keywords: Forced Convection; Heat and Mass transfer; Heat Exchangers; Thermal Systems.

Heat transfer enhancement using second mode self-oscillating structures

2019 ◽  
Vol 30 (7) ◽  
pp. 3827-3842
Author(s):  
Samer Ali ◽  
Zein Alabidin Shami ◽  
Ali Badran ◽  
Charbel Habchi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Laminar Flow ◽  
Flow Regime ◽  
Vortex Generator ◽  
Reynolds Numbers ◽  
Content Type ◽  
Laminar Flow Regime ◽  
Second Mode

Purpose In this paper, self-sustained second mode oscillations of flexible vortex generator (FVG) are produced to enhance the heat transfer in two-dimensional laminar flow regime. The purpose of this study is to determine the critical Reynolds number at which FVG becomes more efficient than rigid vortex generators (RVGs). Design/methodology/approach Ten cases were studied with different Reynolds numbers varying from 200 to 2,000. The Nusselt number and friction coefficients of the FVG cases are compared to those of RVG and empty channel at the same Reynolds numbers. Findings For Reynolds numbers higher than 800, the FVG oscillates in the second mode causing a significant increase in the velocity gradients generating unsteady coherent flow structures. The highest performance was obtained at the maximum Reynolds number for which the global Nusselt number is improved by 35.3 and 41.4 per cent with respect to empty channel and rigid configuration, respectively. Moreover, the thermal enhancement factor corresponding to FVG is 72 per cent higher than that of RVG. Practical implications The results obtained here can help in the design of novel multifunctional heat exchangers/reactors by using flexible tabs and inserts instead of rigid ones. Originality/value The originality of this paper is the use of second mode oscillations of FVG to enhance heat transfer in laminar flow regime.

scholarly journals Numerical Prediction of Heat Transfer Characteristics of Nanofluids in a Minichannel Flow

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Arjumand Adil ◽  
Sonam Gupta ◽  
Pradyumna Ghosh
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Pressure Drop ◽  
Laminar Flow ◽  
Computational Model ◽  
Flow Regime ◽  
Cfd Simulation ◽  
Computational Results ◽  
Heat Transfer Characteristics ◽  
Simulation Process

CFD simulation of the heat transfer and pressure drop characteristics of different nanofluids in a minichannel flow has been explained using FLUENT version 6.3.26. Different nanofluids with nanoparticles of Al2O3, CuO, SiO2, and TiO2have been used in the simulation process. A comparison of the experimental and computational results has been made for the heat transfer and pressure drop characteristics for the case of Al2O3-water nanofluid for the laminar flow. Also, computations have been made by considering Brownian motion as well as without considering Brownian motion of the nanoparticles. After verification of the computational model with the experimental results for Al2O3-water nanofluid, the simulations were performed for the same experimental readings for different nanofluids in the laminar flow regime to find out the heat transfer and pressure drop characteristics.

Flow and Convective Heat Transfer Characteristics of Nanofluids With Various Shapes of Alumina Nanoparticles

2009 ◽  
Author(s):  
Kyo Sik Hwang ◽  
Hyo Jun Ha ◽  
Seung Hyun Lee ◽  
Hyun Jin Kim ◽  
Seok Pil Jang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Laminar Flow ◽  
Convective Heat Transfer ◽  
Flow Regime ◽  
Convective Heat ◽  
Circular Tube ◽  
Al2o3 Nanoparticles ◽  
Heat Transfer Characteristics ◽  
Laminar Flow Regime ◽  
Transfer Characteristics

This paper is to investigate flow and convective heat transfer characteristics of nanofluids with various shapes of Al2O3 nanoparticles flowing through a uniformly heated circular tube under fully developed laminar flow regime. For the purpose, Al2O3 nanofluids of 0.3 Vol.% with sphere, rod, platelet, blade and brick shapes are manufactured by a two-step method. Zeta potential as well as TEM image is experimentally obtained to examine suspension and dispersion characteristics of Al2O3 nanofluids with various shapes. To investigate flow characteristics, the pressure drop of Al2O3 nanofluids with various shapes are measured. In order to investigate convective heat transfer characteristics, the effective thermal conductivities of Al2O3 nanofluids with various shapes, the temperature distribution at the tube surface and the mean temperature of nanofluids at the inlet are measured, respectively. Based on the experimental results, the convective heat transfer coefficient of Al2O3 nanofluids with various shapes is compared with that of pure water and the thermal conductivity of Al2O3 nanofluids with various shapes. Thus, the effect of nanoparticles shape on the flow and convective heat transfer characteristics flowing through a uniformly heated circular tube under fully developed laminar flow regime is experimentally investigated.

Sign in / Sign up

Export Citation Format

Share Document