Investigating the dynamic characteristics of the hydrostatic bearing spindle system with active piezoelectric restrictors

2021 ◽  
pp. 1-20
Author(s):  
Yixin Zhang ◽  
Wei Pan ◽  
Shuo Zhan ◽  
Ran Huang ◽  
Shujiang Chen ◽  
...  

Abstract Studies show that active control technology can improve system performance and meet the increasing industrial demand in diverse applications. In the present study, the dynamic characteristics of the bearing-spindle system based on active piezoelectric (PZT) restrictors, including the amplitude-frequency and phase-frequency characteristics are analyzed theoretically and experimentally. In the analysis, the influence of the pipeline model on the system characteristics is studied. Then the feasibility and effectiveness of the active control method are verified through experiments. It is demonstrated that the theoretical and experimental results are consistent. The present study is expected to provide a guideline for further investigations on the structural optimization and control law design for active hydrostatic oil-film bearing spindle systems.

2018 ◽  
Vol 15 (7) ◽  
pp. 075101 ◽  
Author(s):  
H L Yu ◽  
Z X Zhang ◽  
X L Wang ◽  
R T Su ◽  
H W Zhang ◽  
...  

2021 ◽  
Author(s):  
Ali Durdu ◽  
Yılmaz Uyaroğlu

Abstract Many studies have been introduced in the literature showing that two identical chaotic systems can be synchronized with different initial conditions. Secure data communication applications have also been made using synchronization methods. In the study, synchronization times of two popular synchronization methods are compared, which is an important issue for communication. Among the synchronization methods, active control, integer, and fractional-order Pecaro Carroll (P-C) method was used to synchronize the Burke-Shaw chaotic attractor. The experimental results showed that the P-C method with optimum fractional-order is synchronized in 2.35 times shorter time than the active control method. This shows that the P-C method using fractional-order creates less delay in synchronization and is more convenient to use in secure communication applications.


Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 634 ◽  
Author(s):  
Yang Li ◽  
Zongxia Jiao ◽  
Zimeng Wang

In order to provide a simplified and low-cost solution of the terminal for a distributed actuation system, this paper proposes an electro-hydrostatic actuator (EHA) based on the linear drive principle. The proposed actuator is directly driven by a linear pump with a collaborative rectification mechanism, whose performance relies on the collaboration of the internal two units. A pair of linear oscillating motors are employed to drive the two pump units respectively. The control of the actuator is based on the modulation of the oscillating amplitude, frequency, and phase difference of the two motors. The advantage of this actuator is that no more valve control is needed to rectify the linear pump besides the high efficiency of the direct pump drive. In this paper, both schematic and detailed structure of the actuator is presented. The kinematic and dynamic characteristics are analyzed and modeled, based on which the control method is proposed. The experiments verify the validity of the actuator structure and control.


Sign in / Sign up

Export Citation Format

Share Document