Variant Design Automation: Strategy and Procedure for Storing Design Process Information

2004 ◽  
Author(s):  
Mikael Cederfeldt
Keyword(s):  
Product Design ◽  
Design Process ◽  
Design Automation ◽  
Automation System ◽  
Process Information ◽  
Solution Strategies ◽  
Initial Design ◽  
Design Variables ◽  
Functional Product ◽  
Stored Information

When creating a design automation system for a mature product there already exists a complete and functional product design and the task is to retrace the initial design process to find the input parameters, algorithms, rules, relations and solution strategies (design process information) that govern this initial design. This paper presents strategies and procedures for retracing, naming, classifying and storing the design process information governing the design variables of a mature product design, seen from a CAD representation perspective. Emphasis is on strategy for storing the design process information for use with the CAD representation as well as system transparency and efficient reuse of the documented and stored information.

A Concurrent Design Method for Multiple Cross-Sectional Automotive Body Frames Involving Discrete and Continuous Design Variables

2003 ◽  
Author(s):  
Masataka Yoshimura ◽  
Shinji Nishiwaki ◽  
Kazuhiro Izui
Keyword(s):  
Design Process ◽  
Design Method ◽  
Analytical Models ◽  
Cross Sectional ◽  
Automotive Body ◽  
Initial Design ◽  
Design Variables ◽  
Mechanical Products ◽  
Cross Sectional Design ◽  
Sectional Shape

As CAE (Computer Aided Engineering) applications become increasingly precise, the knowledge and technical skill required to operate such applications has become more highly specialized. However, such tools have not been utilized in the initial design process of mechanical products, where designers cannot construct detailed analytical models. This paper proposes a cross-sectional shape design optimization system that supports the initial design process for bar structures. The cross-sectional design problem is formulated as an eight-objective optimization problem that can be solved using genetic algorithms. A method for generating cross-sectional shapes satisfying designer-required characteristics is also proposed. These methods, which reduce the number of trial and error processes and product design failures, are expected to enable shortened product development lead-times.

Design for Patentability (DFP)

2011 ◽  
Author(s):  
Prakash C. R. J. Naidu ◽  
Kshirsagar C. J. Naidu
Keyword(s):  
System Design ◽  
Product Design ◽  
Design Process ◽  
Process Design ◽  
Design Theory ◽  
Axiomatic Design ◽  
Design Parameters ◽  
Automation System ◽  
Product Design Process ◽  
Axiomatic Design Theory

This paper introduces a new approach named Design for Patentability (DFP) and presents the preliminary formulation of a formal methodology to attempt consideration of patentability aspects during the early stages of design including conceptual design and initial implementation of detailed design and manufacturing. Design for Automation (DFAM) approach formulated earlier by the first author based on Axiomatic Design Theory originated by Suh et. al. at MIT is adapted, suitably modified and customized for inclusion of patentability aspects such as anticipation, functionality, utility, and obviousness. Highlighting the complexity in incorporation of legal aspects in an engineering methodology, the paper presents the possibilities of improving the patentability of a design by a systematic and considered approach. The proposed methodology introduces a Patentability Evaluation phase in-between the Product Design, Process Design and Automation System Design phases of DFAM. The paper reviews mapping of parameters between different domains, namely, Functional Requirements Domain, Design Parameters Domain, Process Requirements Domain, and Design Automation Parameters Domain encompassed in the DFAM methodology and includes Patentability Parameters Domain in parallel to the last three domains to enable possible consideration of patentability aspects during Product Design, Process Design, and Automation System Design. Further, the paper briefly discusses the relevance of the Information Axiom of the Axiomatic Design Theory in the context of preparation of preliminary drafts of invention disclosure and potential claims for perusal by patent agents or attorneys. The approach reported in the paper is expected to have broad applications in the growing field of innovation based entrepreneurship in which design for patentability is an essential requirement for success of a business venture.

Cyberphysical Design Automation Framework for Knowledge-based Engineering

2013 ◽  
Vol 1 (1) ◽  
pp. 158-178
Author(s):  
Urcun John Tanik
Keyword(s):  
System Design ◽  
Design Process ◽  
Design Automation ◽  
Design Theory ◽  
Knowledge Bases ◽  
Knowledge Based ◽  
Knowledge Based Engineering ◽  
Cyberphysical System ◽  
Automation Framework

Cyberphysical system design automation utilizing knowledge based engineering techniques with globally networked knowledge bases can tremendously improve the design process for emerging systems. Our goal is to develop a comprehensive architectural framework to improve the design process for cyberphysical systems (CPS) and implement a case study with Axiomatic Design Solutions Inc. to develop next generation toolsets utilizing knowledge-based engineering (KBE) systems adapted to multiple domains in the field of CPS design automation. The Cyberphysical System Design Automation Framework (CPSDAF) will be based on advances in CPS design theory based on current research and knowledge collected from global sources automatically via Semantic Web Services. A case study utilizing STEM students is discussed.

The design of modular oil tank: A new design process model

2020 ◽  
Vol 15 ◽  
Author(s):  
Jin Li ◽  
Xingsheng Jiang ◽  
Jingye Li ◽  
Yadong Zhao ◽  
Xuexing Li
Keyword(s):  
Product Design ◽  
Design Process ◽  
Process Model ◽  
Mechanical Design ◽  
Computer Software ◽  
Reference Value ◽  
Fuel Tank ◽  
Design Quality ◽  
Design Time ◽  
Design Process Model

Background: In the whole design process of modular fuel tank, there are some unreasonable phenomena. As a result, there are some defects in the design of modular fuel tank, and the function does not meet the requirements in advance. This paper studies this problem. Objective: Through on-the-spot investigation of the factory, a mechanical design process model is designed. The model can provide reference for product design participants on product design time and design quality, and can effectively solve the problem of low product design quality caused by unreasonable product design time arrangement. Methods: After sorting out the data from the factory investigation, computer software is used to program, simulate the information input of mechanical design process, and the final reference value is got. Results: This mechanical design process model is used to guide the design and production of a new project, nearly 3 months ahead of the original project completion time. Conclusion: This mechanical design process model can effectively guide the product design process, which is of great significance to the whole mechanical design field.

scholarly journals Triple-Helix Structured Model Based on Problem-Knowledge-Solution Co-evolution for Innovative Product Design Process

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Qian Hui ◽  
Yan Li ◽  
Ye Tao ◽  
Hongwei Liu
Keyword(s):  
Product Design ◽  
Design Process ◽  
Design Problem ◽  
Triple Helix ◽  
Problem Solution ◽  
Innovative Product ◽  
Innovative Design ◽  
Structured Model ◽  
Knowledge Spaces ◽  
Product Design Process

AbstractA design problem with deficient information is generally described as wicked or ill-defined. The information insufficiency leaves designers with loose settings, free environments, and a lack of strict boundaries, which provides them with more opportunities to facilitate innovation. Therefore, to capture the opportunity behind the uncertainty of a design problem, this study models an innovative design as a composite solving process, where the problem is clarified and resolved from fuzziness to satisfying solutions by interplay among design problems, knowledge, and solutions. Additionally, a triple-helix structured model for the innovative product design process is proposed based on the co-evolution of the problem, solution, and knowledge spaces, to provide designers with a distinct design strategy and method for innovative design. The three spaces interact and co-evolve through iterative mappings, including problem structuring, knowledge expansion, and solution generation. The mappings carry the information processing and decision-making activities of the design, and create the path to satisfying solutions. Finally, a case study of a reactor coolant flow distribution device is presented to demonstrate the practicability of this model and the method for innovative product design.

Process Control Method of Complex Product Multidisciplinary Collaborative Design System

2013 ◽  
Vol 712-715 ◽  
pp. 2888-2893
Author(s):  
Hai Qiang Liu ◽  
Ming Lv
Keyword(s):  
Information Sharing ◽  
Product Design ◽  
Design Process ◽  
Collaborative Design ◽  
Control Method ◽  
Integrated System ◽  
Design System ◽  
System Control ◽  
Complex Product ◽  
Product Design Process

In order to realize information sharing and interchange of complex product multidisciplinary collaborative design (MCD) design process and resources. The Process integrated system control of product multidisciplinary collaborative design was analyzed firstly in this paper, then design process of complex product for supporting multidisciplinary collaborative was introduced, a detailed description is given of the organization structure and modeling process of MCD-oriented Integration of Product Design Meta-model ; and concrete implement process of process integrated system control method was introduced to effectively realize information sharing and interchange between product design process and resources.

Study on a Knowledge-Reuse-Based Rapid Product Design Process

2008 ◽  
Vol 392-394 ◽  
pp. 543-550 ◽  
Author(s):  
Hun Guo ◽  
Guo Xing Tang ◽  
Dun Wen Zuo ◽  
T.J. Liu ◽  
W.D. Jin
Keyword(s):  
Product Design ◽  
Design Process ◽  
Iterative Process ◽  
Process Model ◽  
Design Reuse ◽  
Knowledge Reuse ◽  
Construction Machinery ◽  
Current Design ◽  
Product Design Process ◽  
Three Factor

Design reuse is the application of past designs knowledge and successful experience to current design process and it is a significant method for rapid design. A knowledge-reuse-based rapid product design model is proposed and a three-factor product design iterative process model is studied. Finally, it is applied successfully in the rapid product design of construction machinery combining with the requirement of the construct machinery product design.

scholarly journals Development of Design Process Simulator for the Ship Initial Design Stage

2009 ◽  
Vol 9 (0) ◽  
pp. 211-222
Author(s):  
Kunihiro Hamada ◽  
Mitsuru Kitamura ◽  
Souichi Yasui ◽  
Hiroshi Kawasaki
Keyword(s):  
Design Process ◽  
Design Stage ◽  
Initial Design ◽  
Process Simulator
Sign in / Sign up

Export Citation Format

Share Document