Development of Material Information Model for the Injection Molding Process and Product

2014 ◽  
Author(s):  
Utpal Roy ◽  
Bicheng Zhu
Keyword(s):  
Injection Molding ◽  
High Efficiency ◽  
Information Model ◽  
Information Modeling ◽  
Injection Molding Process ◽  
Molding Process ◽  
Model Framework ◽  
Material Data ◽  
Related Information ◽  
Material Information

Injection molding (IM) has been the most widely used manufacturing process for making plastic products mainly due to its high efficiency and manufacturability. The design of injection molding systems relies heavily on material data and related information. The availability of right material information at right time is of utmost importance for the design, operation and maintenance of the injection molding process. In this paper, a concise, and conceptual Injection Molding Material Information Model (IM-MIM) is proposed to support necessary computer-based modeling, calculation and management of material data. In this paper, we study different steps of the IM process from the information-modeling viewpoint to identify the role and influence of material properties and behaviors in decision-making process. We further developed a four-level IM-MIM model framework, which provides a foundation for different material-related activities or analyses. Several key components in the IM-MIM, which consists of the material data, physical and behavioral properties, thermodynamic and transport properties, and other material information like rheological and mechanical properties, are presented in detail.

A Study on Injection Molding Analysis and Structural Analysis with Truck Brake Pedal

2013 ◽  
Vol 535-536 ◽  
pp. 430-433
Author(s):  
Chul Woo Park ◽  
Seong Ho Seo
Keyword(s):  
Injection Molding ◽  
High Efficiency ◽  
Low Cost ◽  
Fem Simulation ◽  
High Strength ◽  
Injection Molding Process ◽  
Brake Pedal ◽  
Molding Process ◽  
Molding Condition ◽  
Plastic Parts

Injection molding process one of the most important methods to produce plastic parts with high efficiency and low cost. Today, Injection molded parts have been increased dramatically the demand for high strength and quality applications. In this study, truck brake pedal is made of Cast iron and plastic materials to replace the frame for the optimization process that minimizes the runner and the gate dimension will determine the size and shape. Runner and gate dimensions of change based on availability of the product. I will discuss the injection molding. This report investigates that the optimum injection molding condition for minimum of runner and gate position. The FEM Simulation CAE tool, MOLDFLOW, is used for the analysis of injection molding process.

scholarly journals Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process

2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
Phan The Nhan ◽  
Thanh Trung Do ◽  
Tran Anh Son ◽  
Pham Son Minh
Keyword(s):  
Injection Molding ◽  
Temperature Control ◽  
High Efficiency ◽  
Mold Temperature ◽  
Injection Molding Process ◽  
Thin Wall ◽  
Mold Surface ◽  
Melt Flow ◽  
Molding Process ◽  
Flow Length

In the injection molding process, mold temperature control is one of the most efficient methods for improving product quality. In this research, an external gas-assisted mold temperature control (Ex-GMTC) with gas temperature variation from 200°C to 400°C was applied to thin wall injection molding at melt thicknesses from 0.2 to 0.6 mm. The melt flow length was evaluated through the application of this system to the mold of a thin rib product. The results show that the heating process achieves high efficiency in the initial 20 s, with a maximum heating rate of 6.4°C/s. In this case, the mold surface reached 158.4°C. By applying Ex-GMTC to a 0.2 mm flow thickness, the flow length increased from 37.85 to 41.32 mm with polypropylene (PP) material and from 14.54 to 15.8 mm with acrylonitrile butadiene styrene (ABS) material. With the thin rib mold and use of Ex-GMTC, the mold temperature varied from 112.0°C to 140.8°C and the thin rib height reached 7.0 mm.

scholarly journals Optimal Selection of Equipment for Injection Molding Process using the AHP Method

2019 ◽  
Vol 290 ◽  
pp. 03005
Author(s):  
Adelina Hrițuc ◽  
Margareta Coteață ◽  
Oana Dodun ◽  
Gheorghe Nagîț ◽  
Laurențiu Slătineanu
Keyword(s):  
Injection Molding ◽  
High Efficiency ◽  
Optimal Solution ◽  
Future Research ◽  
Injection Molding Process ◽  
Design Activity ◽  
Ahp Method ◽  
Molding Process ◽  
Analytic Hierarchy ◽  
Processing Technologies

Increased interest in the study of plastics has led to the development of processing technologies using such materials. The variety of plastics has led to a diversification of the technical processes through which the finished plastic products can be obtained. We approached the idea of designing plastic injection equipment, considering that various research could be made on the phenomena involved during the process, as well as the observation of the technological properties of the plastics. To design such equipment, some known methods used in conception processes could be applied. Optimizing the equipment design process is one of the elements that can ensure high efficiency of the entire injection molding process. Thus, the method chosen in this case was the analytic hierarchy process (AHP) method, which is one of the methods that offer the possibility to choose a solution when there are many alternatives. The relative simplicity and precision of this method are some of the arguments behind this method. The combination of required equipment and application of the AHP method allowed the choice of an optimal solution for testing injection molding. The result of design activity was an alternative to equipment that can be used for developing future research.

Sustainability Assessment of the Injection Molding Process and the Effects of Material Selection

2014 ◽  
Author(s):  
Utpal Roy ◽  
Yunpeng Li
Keyword(s):  
Injection Molding ◽  
Water Consumption ◽  
Sustainability Assessment ◽  
Material Selection ◽  
Injection Molding Process ◽  
Manufacturing Cost ◽  
Molding Process ◽  
Safety Hazards ◽  
Material Information ◽  
Process Material

This paper discusses the use of the proposed Material Information Model (MIM) [1] in assessing the sustainability of the Injection Molding (IM) process, and clarifies how to use the material information (based on the characteristics of different types of polymers) to quantify the material impacts. The assessment criteria include energy/water consumption and waste (pollution) production during the process and the effects of other materials during production (like the use of additives) that may add to environmental burdens. This paper addresses issues mainly at the IM process level taking the followings into account — pollution and manufacturing cost, energy and water consumption, waste management, operation safety, hazards to the plastic manufacturing personnel and other environmental impacts — to develop requisite process metrics for measuring the sustainability performances of the IM process. The ideas discussed in the paper lead to the development of computational approaches for selecting the “best” process-material combination.

Filling Behavior of Polymer Material into Sub-^|^mu;m Structure in Injection Molding Process

2013 ◽  
Vol 133 (4) ◽  
pp. 105-111
Author(s):  
Chisato Yoshimura ◽  
Hiroyuki Hosokawa ◽  
Koji Shimojima ◽  
Fumihiro Itoigawa
Keyword(s):  
Injection Molding ◽  
Polymer Material ◽  
Injection Molding Process ◽  
Molding Process

scholarly journals Study on External Gas-Assisted Mold Temperature Control with the Assistance of a Flow Focusing Device in the Injection Molding Process

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 965 ◽  
Author(s):  
Nguyen Truong Giang ◽  
Pham Son Minh ◽  
Tran Anh Son ◽  
Tran Minh The Uyen ◽  
Thanh-Hai Nguyen ◽  
...  
Keyword(s):  
Injection Molding ◽  
Temperature Control ◽  
Mold Temperature ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Flow Focusing ◽  
Molding Process ◽  
Heating Efficiency ◽  
Flow Length ◽  
Insert Plate

In the injection molding field, the flow of plastic material is one of the most important issues, especially regarding the ability of melted plastic to fill the thin walls of products. To improve the melt flow length, a high mold temperature was applied with pre-heating of the cavity surface. In this paper, we present our research on the injection molding process with pre-heating by external gas-assisted mold temperature control. After this, we observed an improvement in the melt flow length into thin-walled products due to the high mold temperature during the filling step. In addition, to develop the heating efficiency, a flow focusing device (FFD) was applied and verified. The simulations and experiments were carried out within an air temperature of 400 °C and heating time of 20 s to investigate a flow focusing device to assist with external gas-assisted mold temperature control (Ex-GMTC), with the application of various FFD types for the temperature distribution of the insert plate. The heating process was applied for a simple insert model with dimensions of 50 mm × 50 mm × 2 mm, in order to verify the influence of the FFD geometry on the heating result. After that, Ex-GMTC with the assistance of FFD was carried out for a mold-reading process, and the FFD influence was estimated by the mold heating result and the improvement of the melt flow length using acrylonitrile butadiene styrene (ABS). The results show that the air sprue gap (h) significantly affects the temperature of the insert and an air sprue gap of 3 mm gives the best heating rate, with the highest temperature being 321.2 °C. Likewise, the actual results show that the height of the flow focusing device (V) also influences the temperature of the insert plate and that a 5 mm high FFD gives the best results with a maximum temperature of 332.3 °C. Moreover, the heating efficiency when using FFD is always higher than without FFD. After examining the effect of FFD, its application was considered, in order to improve the melt flow length in injection molding, which increased from 38.6 to 170 mm, while the balance of the melt filling was also clearly improved.

Sign in / Sign up

Export Citation Format

Share Document