Stochastic Stability of a Piezoelectric Vibration Energy Harvester and Stabilization Using Noise

Author(s):  
Subramanian Ramakrishnan ◽  
Connor Edlund

Vibration energy harvesters convert the energy of ambient, random vibration into electrical power often using piezoelectric transduction. The stochastic dynamics of a piezoelectric harvester with parameteric uncertainties is yet to be fully explored in the nonequilibrium regime. Motivated by mathematical results that establish the counterintuitive phenomenon of stabilization of response in certain nonlinear systems using noise, we investigate the stochastic stability of a generic harvester in the linear and the monostable nonlinear regimes excited by multiplicative noise characterized by both Brownian and the Lévy stable distributions. First, a lower bound on the magnitude of noise intensity that guarantees exponential stability almost surely, is obtained analytically as an inequality in terms of system parameters in the linear case. This result is validated numerically using the Euler-Maruyama scheme. Next, noise-induced stabilization in the harvester dynamics is demonstrated numerically for both the linear and nonlinear cases wherein Lévy noise was found to achieve stabilization at lower noise intensities than Brownian noise. Additionally, the inclusion of a nonlinear stiffness does not have an appreciable affect on the stabilization behavior. The results indicate that stabilization may be achieved using noise and are expected to be useful in harvester design.

2014 ◽  
Vol 953-954 ◽  
pp. 655-658 ◽  
Author(s):  
Guang Qing Shang ◽  
Hong Bing Wang ◽  
Chun Hua Sun

Energy harvesting system has become one of important areas of ​​research and develops rapidly. How to improve the performance of the piezoelectric vibration energy harvester is a key issue in engineering applications. There are many literature on piezoelectric energy harvesting. The paper places focus on summarizing these literature of mathematical modeling of piezoelectric energy harvesting, ranging from the linear to nonlinear, from early a single mechanical degree to piezoaeroelastic problems.


2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Cevat Volkan Karadag ◽  
Nezih Topaloglu

In this paper, a novel smart vibration energy harvester (VEH) is presented. The harvester automatically adjusts its natural frequency to stay in resonance with ambient vibration. The proposed harvester consists of two piezoelectric cantilever beams, a tiny piezomotor with a movable mass attached to one of the beams, a control unit, and electronics. Thanks to its self-locking feature, the piezomotor does not require energy to fix its movable part, resulting in an improvement in overall energy demand. The operation of the system is optimized in order to maximize the energy efficiency. At each predefined interval, the control unit wakes up, calculates the phase difference between two beams, and if necessary, actuates the piezomotor to move its mass in the appropriate direction. It is shown that the proposed tuning algorithm successfully increases the fractional bandwidth of the harvester from 4% to 10%. The system is able to deliver 83.4% of the total harvested power into usable electrical power, while the piezomotor uses only 2.4% of the harvested power. The presented efficient, autotunable, and self-sufficient harvester is built using off-the-shelf components and it can be easily modified for wide range of applications.


2020 ◽  
Vol 4 (2) ◽  
pp. 39
Author(s):  
Sreekumari Raghavan ◽  
Rishi Gupta

The need for energy harvesters for various applications, including structural health monitoring (SHM) in remote and inaccessible areas, is well established. Energy harvesters can utilize the ambient vibration of the body on which they are mounted to generate energy, thus eliminating the need for an external source of power. One such type of harvester is designed using piezoelectric materials and using a cantilever type set-up. However, the challenge associated with cantilever-based Piezoelectric Vibration Energy Harvesters (PVEH) is that its output power reduces when the ambient vibration frequency deviates from the resonant frequency of the harvester. This calls for a mechanism to tune its resonant frequency to match with the ambient frequency. This article presents an innovative design of an electrically tunable PVEH. The PVEH is integrated with an Ionic Polymer Metal Composite (IPMC) as an actuator that loads the cantilever beam, changing the stiffness of the beam. IPMC utilizes low power, and the authors demonstrate in this paper that a net gain of power can be achieved by this novel design. For the configuration used, it is experimentally proven that a frequency shift from 5.9 Hz to 8 Hz is achieved with three actuation values. Typical power output from the harvester is 52.03 µW when the power spent on actuation is only 0.765 µW. On-going modeling of this system using simulation software is expected to lead to further optimization and prototyping of design.


2013 ◽  
Vol 734-737 ◽  
pp. 2638-2641
Author(s):  
Yong Zhou ◽  
Shi Li

This paper first presents an analytical model for investigating the vibration performance of a thin curved laminated piezoelectric beam with variable curvatures and transverse sections. This kind of beam is widely used for the MEMS piezoelectric vibration energy harvester. The curved thin beam theory with bisymmetric section, here rectangular section used, is employed to explore the bending and twisting coupling vibration characteristics. In order to study the vibration properties with concentrated load, the effects of the tip proof mass isnt used. The paper also shows that the adoption of ANSYS software to carry out the MEMS piezoelectric vibration energy harvesters numerical simulation can improve the efficiency of the harvester designing and manufacturing consumedly. The results showed that the maximum voltage at the resonant point was increasing while the initial curvature radius increasing. On the other hand, the voltage difference of the inner edge and the outer edge was very small because the matrix layer was PDMS with very small stiffness and density.


2014 ◽  
Vol 945-949 ◽  
pp. 1457-1460
Author(s):  
Bin Guo ◽  
Zhong Sheng Chen ◽  
Cong Cong Cheng ◽  
Yong Min Yang

A methodology of rotating vibration energy harvesting with nonlinear magnetic forces is studied in this paper. A mathematical model of rotating piezoelectric vibration energy harvesters with nonlinear magnetic forces is built by the Lagrange’s equation and assumed-modes method. The nonlinear model is solved by numerical methods. Then the effects of distance between two magnets are studied. The results demonstrate that the performance of rotating piezoelectric vibration energy harvester with nonlinear magnetic force is better than traditional linear ones when the distance between two magnets is appropriate.


Energy ◽  
2021 ◽  
Vol 228 ◽  
pp. 120595
Author(s):  
Jiaxi Zhou ◽  
Xuhui Zhao ◽  
Kai Wang ◽  
Yaopeng Chang ◽  
Daolin Xu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document