The Role of Fuel Cells for Consumer Electronic Products and Toys

2003 ◽  
Author(s):  
B. Banazwski ◽  
R. K. Shah
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
High Energy ◽  
Consumer Products ◽  
Proton Exchange ◽  
Consumer Electronics ◽  
High Energy Density ◽  
Direct Methanol

Batteries have not kept pace with the advancing technology that they power, but they are used in everything from cell phones, laptop computers, and toys to consumer electronics. Compared to the devices that they power, batteries are relatively heavy, expensive per unit power they produce, last a relatively short time and recharging them takes hours. The solution to this less than desired means of a power source is fuel cells. Three fuel cells, also referred to as air breathers, considered are proton exchange membrane fuel cell (PEMFC), direct methanol fuel cells (DMFC), and direct formic acid fuel cells (DFAFC). We will discuss these fuel cells for micro and portable applications within the power range of 0.5 to 20 W for potential replacement of batteries. The reason for developing such fuel cells is to harness the power stored in the high energy density fuels, which provides more power and longer run times for the same packaging volume as batteries. The advantages of each type of fuel cell over batteries, their unique characteristics, technical drawbacks, current and future consumer products, and commercial issues will be outlined in this paper. A growing mobile society and consumer demands will drive the development of fuel cell technology forward as batteries reach their limit.

Fuel Cells vs. Competing Technologies

2003 ◽  
Author(s):  
Supramanian Srinivasan ◽  
Lakshmi Krishnan ◽  
Andrew B. Bocarsly ◽  
Kan-Lin Hsueh ◽  
Chiou-Chu Lai ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
Cell Structure ◽  
Proton Exchange ◽  
Point Of View ◽  
Direct Methanol ◽  
Energy Conversion Systems ◽  
Competing Technologies

Investments of over $1 B have been made for Fuel Cell R&D over the past five decades, for space and terrestrial applications; the latter includes military, residential power and heating, transportation and remote and portable power. The types of fuel cells investigated for these applications are PEMFCs (proton exchange membrane fuel cells), AFCs (alkaline fuel cells), DMFCs (direct methanol fuel cells), PAFCs (phosphoric acid fuel cells), MCFCs (molten carbon fuel cells), SOFCs (solid oxide fuel cells). Cell structure, operating principles, and characteristics of each type of fuel cell is briefly compared. The performances of fuel cells vs. competing technologies are analyzed. The key issues are which of these energy conversion systems are technologically advanced and economically favorable and can meet the lifetime, reliability and safety requirements. This paper reviews fuel cells vs. competing technologies in each application category from a scientific and engineering point of view.

Advances in the Research and Development of Fuel Cells in China

2004 ◽  
Author(s):  
Chong-Fang Ma ◽  
Hang Guo ◽  
Fang Ye ◽  
Jian Yu
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Research And Development ◽  
Proton Exchange Membrane ◽  
High Efficiency ◽  
Direct Methanol Fuel Cells ◽  
Proton Exchange ◽  
Molten Carbonate ◽  
Direct Methanol ◽  
The Government

As a clean, high efficiency power generation technology, fuel cell is a promising choice of next generation power device. Widely application of fuel cells will make a contribution to save fuels and reduce atmospheric pollution. In recent years, fuel cells science, technology and engineering have attracted great interest in China. There are more and more Chinese scientists and engineers embark upon fuel cell projects. The government also encourages academic institutions and companies to enter into this area. Research and development of fuel cells are growing rapidly in China. There are many chances and challenges in fuel cells’ research and development. The state of the art of research and development of fuel cells in China was overviewed in this paper. The types of fuel cells addressed in this paper included alkaline fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells, proton exchange membrane fuel cells and direct methanol fuel cells.

Polysulfone-based Ionomers for Fuel Cell Applications

2009 ◽  
Vol 21 (5) ◽  
pp. 673-692 ◽  
Author(s):  
Cristina Iojoiu ◽  
Jean-Yves Sanchez
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Dimensional Stability ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
Proton Exchange ◽  
Direct Methanol ◽  
Methanol Fuel Cells ◽  
Exchange Membrane ◽  
The Impact

This paper is a review that is focused on ionomers based on aromatic polysulfone backbone and intended to be used in proton exchange membrane fuel cells or in direct methanol fuel cells. Emphasis is placed on the different chemical routes to prepare the ionomers. Special attention is given to the impact of the ionomer structure on the conductivity performance and on the dimensional stability of the membranes at high temperatures.

Techno-Economic Challenges for PEMFCs and DMFCs Entering Energy Sector

2003 ◽  
Author(s):  
S. Srinivasan ◽  
R. Dillon ◽  
L. Krishnan ◽  
A. S. Arico ◽  
V. Antonucci ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
Cost Effective ◽  
Energy Sector ◽  
Global Market ◽  
Proton Exchange ◽  
Critical Issues ◽  
Direct Methanol

Proton Exchange Membrane Fuel Cells (PEMFC) and Direct Methanol Fuel Cells (DMFC) have been in the forefront of all fuel cell technologies for transportation and portable power applications. This is mainly because of the quantum/semi-quantum jumps in these technologies. However, there are several techno-economic challenges for these types of fuel cells to enter the energy sector. The cell structures and operating principles of PEMFC and DMFC are similar to each other. However, techno-economic challenges for PEMFCs are significantly different from those for DMFCs, due to their applications, associated competing technologies, global market, and manufacturing environment. Both types of fuel cell are close to entering the energy sector now, more than ever before. Significant reduction of PEMFCs capital cost and miniaturization of DMFCs are two critical issues. Intense research and development efforts are needed with respect to (i) finding better and less expensive electrocatalysts and proton conducting membranes (ii) optimization of structure and composition of membrane and electrode assemblies, (iii) automation of techniques to fabricate cell and stack components, and (iv) finding efficient and cost effective methods for thermal and water management.

scholarly journals Proton Exchange Membrane (PEM) Fuel Cells with Platinum Group Metal (PGM)-Free Cathode

2021 ◽  
Author(s):  
Lei Du ◽  
Gaixia Zhang ◽  
Shuhui Sun
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
High Energy ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Platinum Group Metals ◽  
High Energy Density ◽  
Platinum Group ◽  
Exchange Membrane

AbstractProton exchange membrane (PEM) fuel cells have gained increasing interest from academia and industry, due to its remarkable advantages including high efficiency, high energy density, high power density, and fast refueling, also because of the urgent demand for clean and renewable energy. One of the biggest challenges for PEM fuel cell technology is the high cost, attributed to the use of precious platinum group metals (PGM), e.g., Pt, particularly at cathodes where sluggish oxygen reduction reaction takes place. Two primary ways have been paved to address this cost challenge: one named low-loading PGM-based catalysts and another one is non-precious metal-based or PGM-free catalysts. Particularly for the PGM-free catalysts, tremendous efforts have been made to improve the performance and durability—milestones have been achieved in the corresponding PEM fuel cells. Even though the current status is still far from meeting the expectations. More efforts are thus required to further research and develop the desired PGM-free catalysts for cathodes in PEM fuel cells. Herein, this paper discusses the most recent progress of PGM-free catalysts and their applications in the practical membrane electrolyte assembly and PEM fuel cells. The most promising directions for future research and development are pointed out in terms of enhancing the intrinsic activity, reducing the degradation, as well as the study at the level of fuel cell stacks.

The development of a highly durable Fe-N-C electrocatalyst with favorable CNT structures for the oxygen reduction in PEMFCs

2021 ◽  
pp. 1-7
Author(s):  
Shuiyun Shen ◽  
Ziwen Ren ◽  
Silei Xiang ◽  
Shiqu Chen ◽  
Zehao Tan ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Oxygen Reduction ◽  
Proton Exchange Membrane ◽  
Metal Organic Framework ◽  
High Energy ◽  
Proton Exchange ◽  
Rotating Disk Electrode ◽  
High Energy Density ◽  
Pt Catalyst ◽  
Highly Active

Abstract Proton exchange membrane fuel cell (PEMFC) is a crucial route for energy saving, emission reduction and the development of new energy vehicles because of its high power density, high energy density as well as the low operating temperature which corresponds to fast starting and power matching. However, the rare and expensive Pt resource greatly hinders the mass production of fuel cell, and the development of highly active and durable non-precious metal catalysts toward the oxygen reduction reaction (ORR) in the cathode is considered to be the ultimate solution. In this article, a highly active and durable Fe-N-C catalyst was facilely derived from metal organic framework materials (MOFs), and a favorable structure of carbon nanotubes (CNTs) were formed, which accounts for a desired good durability. The as-optimized catalyst has a half-wave potential of 0.84V for the ORR, which is comparable to that of commercial Pt/C. More attractively, it has good stabilities both in rotating disk electrode and single cell tests, which provides a large practical application potential in the replacement of Pt catalyst as the ORR electrocatalyst in fuel cells.

scholarly journals Heat and Mass Transfer and Two Phase Flow in Hydrogen Proton Exchange Membrane Fuel Cells and Direct Methanol Fuel Cells

2003 ◽  
Author(s):  
Hang Guo ◽  
Chong Fang Ma ◽  
Mao Hai Wang ◽  
Jian Yu ◽  
Xuan Liu ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Fuel Cells ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
Proton Exchange ◽  
Phase Flow ◽  
Two Phase ◽  
Direct Methanol ◽  
Methanol Fuel Cells ◽  
Exchange Membrane

Fuel cells are related to a number of scientific and engineering disciplines, which include electrochemistry, catalysis, membrane science and engineering, heat and mass transfer, thermodynamics and so on. Several thermophysical phenomena such as heat transfer, multicomponent transport and two phase flow play significant roles in hydrogen proton exchange membrane fuel cells and direct methanol fuel cells based on solid polymer electrolyte membrane. Some coupled thermophysical issues are bottleneck in process of scale-up of direct methanol fuel cells and hydrogen proton exchange membrane fuel cells. In present paper, experimental results of visualization of condensed water in fuel cell cathode microchannels are presented. The equivalent diameter of the rectangular channel is 0.8mm. Water droplets from the order of 0.08mm to 0.8mm were observed from several different locations in the channels. Several important problems, such as generation and change characteristics of water droplet and gas bubble, two phase flow under chemical reaction conditions, mass transfer enhancement of oxygen in the cathode porous media layer, heat transfer enhancement and high efficiency cooling system of proton exchange membrane fuel cells stack, etc., are discussed.

scholarly journals Electrochemical Performance Improvement of the Catalyst of the Methanol Micro-Fuel Cell Using Carbon Nanotubes

2019 ◽  
Author(s):  
Mohammad Kazemi Nasrabadi ◽  
Amir Ebrahimi-Moghadam ◽  
Mohammad Hosein Ahmadi ◽  
Ravinder Kumar ◽  
Narjes Nabipour
Keyword(s):  
Carbon Nanotubes ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Carbon Black ◽  
Oxidation Reaction ◽  
High Energy ◽  
Proton Exchange ◽  
Operating Conditions ◽  
High Energy Density ◽  
Methanol Oxidation Reaction

Due to low working temperature, high energy density and low pollution, proton exchange fuel cells have been investigated under different operating conditions in different applications. Using platinum catalysts in methanol fuel cells leads to increasing the cost of this kind of fuel cell which is considered as a barrier to the commercialism of this technology. For this reason, a lot of efforts have been made to reduce the loading of the catalyst required on different supports. In this study, carbon black (CB) and carbon nanotubes (CNT) have been used as catalyst supports of the fuel cell as well as using the double-metal combination of platinum-ruthenium (PtRu) as anode electrode catalyst and platinum (Pt) as cathode electrode catalyst. The performance of these two types of electro-catalyst in the oxidation reaction of methanol has been compared based on electrochemical tests. Results showed that the carbon nanotubes increase the performance of the micro-fuel cell by 37% at maximum power density, compared to the carbon black. Based on thee-electrode tests of chronoamperometry and voltammetry, it was found that the oxidation onset potential of methanol for CNT has been around 20% less than CB, leading to the kinetic improvement of the oxidation reaction. The current density of methanol oxidation reaction increased up to 62% in CNT sample compared to CB supported one, therefore the active electrochemical surface area of the catalyst has been increased up to 90% by using CNT compared to CB which shows the significant rise of the electrocatalytic activity in CNT supported catalyst. Moreover, the resistance of the CNT supported sample to poisonous intermediate species has been found 3% more than CB supported one. According to the chronoamperometry test results, it was concluded that the performance and sustainability of the CNT electro-catalyst show remarkable improvement compared to CB electro-catalyst in the long term.

The Progress of Hybrid Proton Exchange Membranes Prepared by SPAEKs for Direct Methanol Fuel Cells

2012 ◽  
Vol 512-515 ◽  
pp. 1442-1445
Author(s):  
Hai Dan Lin ◽  
He Zhang ◽  
Xiao Ying Yang
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Direct Methanol Fuel Cells ◽  
Proton Exchange Membranes ◽  
Proton Exchange ◽  
Layer By Layer ◽  
Aryl Ether ◽  
Fuel Cell Performance ◽  
Nanocomposite Layer ◽  
Direct Methanol

This review summarizes efforts in developing proton exchange membranes (PEMs) with excellent electrochemical fuel cell performance prepared by SPAEK in proton exchange membrane fuel cell (PEMFC) applications. Over the past few decades, much polyelectrolyte has been extensively studied to improve the properties as alternatives with lower cost and considerable performances for PEMFC. Sulfonated poly(aryl ether ketone) (SPAEK), fell into this category, which offers the attribute of adjustable proton conductivity, excellent mechanical and thermal stability. The discussion will cover crosslinking, organic-inorganic nanocomposite, layer-by-layer approaches.

Sign in / Sign up

Export Citation Format

Share Document