A New Loss and Deviation Model for Axial Compressor Inlet Guide Vanes

2013 ◽  
Author(s):  
Milan Banjac ◽  
Milan V. Petrovic ◽  
Alexander Wiedermann
Keyword(s):  
Guide Vane ◽  
Thickness Distribution ◽  
Axial Compressor ◽  
Algebraic Model ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Viscous Effects ◽  
Through Flow ◽  
Trailing Vortices ◽  
Compressor Inlet

This paper describes a new universal algebraic model for the estimation of flow deflection and losses in axial compressor inlet guide vane devices. The model deals with nominal flow and far-off-design operating conditions in connection with large stagger angle adjustments. The first part of the model considers deflection and losses in 2D cascades, taking into account the main cascade geometry parameters and operating conditions, such as Mach number and stagger adjustment. The second part of the model deals with additional deviation and losses due to secondary flow caused by the endwall viscous effects and by the trailing vortices. The model is developed for NACA65 airfoils, NACA63-A4K6 airfoils and airfoils having an NACA65 thickness distribution on a circular-arc camber line. It is suitable for application in 1D or 2D through-flow calculations for design and analysis cases. The development of the method is based on systematic CFD flow calculations for various cascade geometries and operating parameters. The comparison of correlation results with experimental data for several test cases shows good agreement.

A New Loss and Deviation Model for Axial Compressor Inlet Guide Vanes

2014 ◽  
Vol 136 (7) ◽  
Author(s):  
Milan Banjac ◽  
Milan V. Petrovic ◽  
Alexander Wiedermann
Keyword(s):  
Guide Vane ◽  
Thickness Distribution ◽  
Axial Compressor ◽  
Algebraic Model ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Viscous Effects ◽  
Through Flow ◽  
Trailing Vortices ◽  
Compressor Inlet

This paper describes a new universal algebraic model for the estimation of flow deflection and losses in axial compressor inlet guide vane devices. The model deals with nominal flow and far-off-design operating conditions in connection with large stagger angle adjustments. The first part of the model considers deflection and losses in 2D cascades, taking into account the main cascade geometry parameters and operating conditions, such as Mach number and stagger adjustment. The second part of the model deals with additional deviation and losses due to secondary flow caused by the end wall viscous effects and by the trailing vortices. The model is developed for NACA65 airfoils, NACA63-A4K6 airfoils, and airfoils having an NACA65 thickness distribution on a circular-arc camber line. It is suitable for application in 1D or 2D through-flow calculations for design and analysis cases. The development of the method is based on systematic computational fluid dynamics (CFD) flow calculations for various cascade geometries and operating parameters. The comparison of correlation results with experimental data for several test cases shows good agreement.

scholarly journals IGV-Rotor Interactions in a 4-Stage Axial Compressor

1998 ◽  
Author(s):  
O. Puetz ◽  
J. Eikelmann ◽  
H. Stoff
Keyword(s):  
Flow Field ◽  
Total Pressure ◽  
Guide Vane ◽  
Axial Compressor ◽  
Suction Side ◽  
Fast Response ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Mean Values ◽  
Swirl Angle

Detailed experiments have been made in a 4-stage axial compressor of industrial design. The exit flow field of the rotor of the first stage was measured by hot-wire anemometry and fast-response pressure probes under design operating conditions. Tandem inlet guide vanes (IGV) are situated upstream of the first rotor. Flow field results are presented for total pressure, massflux and swirl angle over a closely-spaced grid of probe locations in radial and circumferential directions in the absolute and rotating frame of reference. The tandem inlet guide vane row and stage 1 vane row are positioned peripherally for various settings (clocking). Depending on the peripherical position of IGV and stator 1 the mean values for one rotor pitch varies by 1.5% for mass flow, 1.3° for swirl angle and 8.7% for total pressure. Loss in total pressure at the rotor exit is a minimum, when the IGV row wakes enter the downstream rotor passage at about 1/4 pitch from the suction-side. Blade and vane channels have similar pitchwise spacing.

Natural Transition Phenomena on an Axial Compressor Blade

2000 ◽  
Author(s):  
J. D. Hughes ◽  
G. J. Walker
Keyword(s):  
Guide Vane ◽  
Axial Compressor ◽  
Inlet Guide Vane ◽  
Instability Wave ◽  
Blade Loading ◽  
Instability Waves ◽  
Transition Prediction ◽  
Tollmien Schlichting ◽  
Vane Clocking ◽  
Hot Film

Data from a surface hot-film array on the outlet stator of a 1.5 stage axial compressor are analyzed to look for direct evidence of natural transition phenomena. An algorithm is developed to identify instability waves within the Tollmien Schlichting (T-S) frequency range. The algorithm is combined with a turbulent intermittency detection routine to produce space∼time diagrams showing the probability of instability wave occurrence prior to regions of turbulent flow. The paper compares these plots for a range of blade loading, with free-stream conditions corresponding to the maximum and minimum inflow disturbance periodicity produced by inlet guide vane clocking. Extensive regions of amplifying instability waves are identified in nearly all cases. The implications for transition prediction in decelerating flow regions on axial turbomachine blades are discussed.

Accommodation of Multi-Shaft Gas Turbine Switching Control Gain Tuning Problem to IGV Position

2021 ◽  
Author(s):  
Yujia Ma ◽  
Liu Jinfu ◽  
Linhai Zhu ◽  
Qi Li ◽  
Huanpeng Liu ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Guide Vane ◽  
Optimization Procedure ◽  
Switching Control ◽  
Inlet Guide Vane ◽  
Multi Objective ◽  
Control Gain ◽  
Controller Gain ◽  
Compressor Inlet ◽  
Comprehensive Indicator

Abstract This article aims to discuss the influence of compressor Inlet Guide Vane (IGV) position on gas turbine switching control system gain tuning problem. The distinction between IGV and normally reckoned working conditions is differentiated, and an improved double-layer LPV model is proposed to estimate the protected parameters under various IGV positions. Controller gain tuning is conducted with single and multi-objective intellectual optimization algorithms. Simulation results reveal that normally used multi-objective optimization procedure is unnecessary and time-consuming. While with the comprehensive indicator introduced in this paper, the calculation burden can be greatly eased. This improvement is especially advantageous when tuning work is carried out under multiple IGV positions.

scholarly journals Redesigning a compressor inlet guide vane for 0 to 60 degree stagger angles

2021 ◽  
Author(s):  
Stephanie Waters
Keyword(s):  
Fuel Consumption ◽  
Guide Vane ◽  
Leading Edge ◽  
Aircraft Engine ◽  
Inlet Guide Vane ◽  
Pressure Loss Coefficient ◽  
Compressor Inlet ◽  
Curvature Distribution ◽  
Stagger Angle ◽  
Total Pressure Loss Coefficient

This report's objective is to reduce the total pressure loss coefficient of an inlet guide vane (IGV) at high stagger angles and to therefore reduce the overall fuel consumption of an aircraft engine. IGVs are usually optimized for cruise where the stagger angle is approximately 0 degrees. To reduce losses, four different methodologies were tested: increasing the leading edge radius, increasing the camber, creating a "drooped nose", and creating an "S" curvature distribution. A baseline IGV was chosen and modified using these methodologies to create 10 new IGV designs. CFX was used to perform a CFD analysis on all 11 IGV designs at 5 stagger angles from 0 to 60 degrees. Typical missions were analyzed and it was discovered that the new designs decreased the fuel consumption of the engine. The IGV with the "S" curvature and thicker leading edge was the best and decreased the fuel consumption by 0.24%.

Performance Study of a 1 MW Gas Turbine Using Variable Geometry Compressor and Turbine Blade Cooling

2010 ◽  
Author(s):  
Cleverson Bringhenti ◽  
Jesuino Takachi Tomita ◽  
Joa˜o Roberto Barbosa
Keyword(s):  
Gas Turbine ◽  
Guide Vane ◽  
Turbine Blades ◽  
Axial Flow ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Variable Geometry ◽  
Performance Study ◽  
Turbine Blade Cooling ◽  
Blade Cooling

This work presents the performance study of a 1 MW gas turbine including the effects of blade cooling and compressor variable geometry. The axial flow compressor, with Variable Inlet Guide Vane (VIGV), was designed for this application and its performance maps synthesized using own high technological contents computer programs. The performance study was performed using a specially developed computer program, which is able to numerically simulate gas turbine engines performance with high confidence, in all possible operating conditions. The effects of turbine blades cooling were calculated for different turbine inlet temperatures (TIT) and the influence of the amount of compressor-bled cooling air was studied, aiming at efficiency maximization, for a specified blade life and cooling technology. Details of compressor maps generation, cycle analysis and blade cooling are discussed.

The Influence of Wake–Wake Interactions on Loss Fluctuations of a Downstream Axial Compressor Blade Row

1998 ◽  
Vol 120 (4) ◽  
pp. 695-704 ◽  
Author(s):  
G. J. Walker ◽  
J. D. Hughes ◽  
I. Ko¨hler ◽  
W. J. Solomon
Keyword(s):  
Free Stream ◽  
Guide Vane ◽  
Axial Compressor ◽  
Inlet Guide Vane ◽  
Viscous Losses ◽  
Wake Interaction ◽  
Blade Row ◽  
Wake Interactions ◽  
Periodic Fluctuations ◽  
Disturbance Field

The interaction between wakes of an adjacent rotor–stator or stator–rotor blade row pair in an axial turbomachine is known to produce regular spatial variations in both the time-mean and unsteady flow fields in a frame relative to the upstream member of the pair. This paper examines the influence of such changes in the free-stream disturbance field on the viscous losses of a following blade row. Hot-wire measurements are carried out downstream of the outlet stator in a 1.5-stage axial compressor having equal blade numbers in the inlet guide vane (IGV) and stator rows. Clocking of the IGV row is used to vary the disturbance field experienced by the stator blades; the influence on stator wake properties is evaluated. The magnitude of periodic fluctuations in ensemble-averaged stator wake thickness is significantly influenced by IGV wake-rotor wake interaction effects. The changes in time-mean stator losses appear marginal.

Mechanical Design and Testing of a 2.5 MW sCO2 Compressor Loop

2021 ◽  
Author(s):  
Stefan D. Cich ◽  
J. Jeffrey Moore ◽  
Chris Kulhanek ◽  
Meera Day Towler ◽  
Jason Mortzheim
Keyword(s):  
High Efficiency ◽  
Mechanical Design ◽  
Guide Vane ◽  
Operating Conditions ◽  
Inlet Guide Vane ◽  
Inlet Temperature ◽  
Design Changes ◽  
Wide Range ◽  
Inlet Conditions ◽  
Design And Testing

Abstract An enabling technology for a successful deployment of the sCO2 close-loop recompression Brayton cycle is the development of a compressor that can maintain high efficiency for a wide range of inlet conditions due to large variation in properties of CO2 operating near its dome. One solution is to develop an internal actuated variable Inlet Guide Vane (IGV) system that can maintain high efficiency in the main and re-compressor with varying inlet temperature. A compressor for this system has recently been manufactured and tested at various operating conditions to determine its compression efficiency. This compressor was developed with funding from the US DOE Apollo program and industry partners. This paper will focus on the design and testing of the main compressor operating near the CO2 dome. It will look at design challenges that went into some of the decisions for rotor and case construction and how that can affect the mechanical and aerodynamic performance of the compressor. This paper will also go into results from testing at the various operating conditions and how the change in density of CO2 affected rotordynamics and overall performance of the machine. Results will be compared to expected performance and how design changes were implanted to properly counter challenges during testing.

Analysis on the Performance Characteristics of SOFC/GT Hybrid Systems Based on a Commercially Available MW-Class Gas Turbine

2005 ◽  
Author(s):  
Tae Won Song ◽  
Jeong L. Sohn ◽  
Tong Seop Kim ◽  
Sung Tack Ro
Keyword(s):  
Gas Turbine ◽  
Hybrid System ◽  
Guide Vane ◽  
Control Strategies ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
Inlet Guide Vane ◽  
Part Load ◽  
Optimal Power ◽  
Selection Of

To investigate the possible applications of the SOFC/MGT hybrid system to large electric power generations, a study for the kW-class hybrid power system conducted in our group is extended to the MW-class hybrid system in this study. Because of the matured technology of the gas turbine and commercial availability in the market, it is reasonable to construct a hybrid system with the selection of a gas turbine as an off-the-shelf item. For this purpose, the performance analysis is conducted to find out the optimal power size of the hybrid system based on a commercially available gas turbine. The optimal power size has to be selected by considering specifications of a selected gas turbine which limit the performance of the hybrid system. Also, the cell temperature of the SOFC is another limiting parameter to be considered in the selection of the optimal power size. Because of different system configuration of the hybrid system, the control strategies for the part-load operation of the MW-class hybrid system are quite different from the kW-class case. Also, it is necessary to consider that the control of supplied air to the MW-class gas turbine is typically done by the variable inlet guide vane located in front of the compressor inlet, instead of the control of variable rotational speed of the kW-class micro gas turbine. Performance characteristics at part-load operating conditions with different kinds of control strategies of supplied fuel and air to the hybrid system are investigated in this study.

Wall Boundary Layer Development Near the Tip Region of an IGV of an Axial Flow Compressor

1984 ◽  
Vol 106 (2) ◽  
pp. 337-345
Author(s):  
B. Lakshminarayana ◽  
N. Sitaram
Keyword(s):  
Boundary Layer ◽  
Guide Vane ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Axial Flow ◽  
Inlet Guide Vane ◽  
Wall Boundary Layer ◽  
Wall Boundary ◽  
Boundary Layer Development ◽  
Flow Compressor

The annulus wall boundary layer inside the blade passage of the inlet guide vane (IGV) passage of a low-speed axial compressor stage was measured with a miniature five-hole probe. The three-dimensional velocity and pressure fields were measured at various axial and tangential locations. Limiting streamline angles and static pressures were also measured on the casing of the IGV passage. Strong secondary vorticity was developed. The data were analyzed and correlated with the existing velocity profile correlations. The end wall losses were also derived from these data.

Sign in / Sign up

Export Citation Format

Share Document