scholarly journals DNS of Low-Pressure Turbine Cascade Flows With Elevated Inflow Turbulence Using a Discontinuous-Galerkin Spectral-Element Method

2016 ◽  
Author(s):  
Anirban Garai ◽  
Laslo T. Diosady ◽  
Scott M. Murman ◽  
Nateri K. Madavan
Keyword(s):  
Numerical Simulations ◽  
Computer Architecture ◽  
Discontinuous Galerkin ◽  
High Performance ◽  
Separation Bubble ◽  
Spectral Element ◽  
Low Pressure ◽  
Efficient Manner ◽  
Low Pressure Turbine ◽  
Inflow Turbulence

Recent progress towards developing a new computational capability for accurate and efficient high–fidelity direct numerical simulation (DNS) and large–eddy simulation (LES) of turbomachinery is described. This capability is based on an entropy– stable Discontinuous–Galerkin spectral–element approach that extends to arbitrarily high orders of spatial and temporal accuracy, and is implemented in a computationally efficient manner on a modern high performance computer architecture. An inflow turbulence generation procedure based on a linear forcing approach has been incorporated in this framework and DNS conducted to study the effect of inflow turbulence on the suction–side separation bubble in low–pressure turbine (LPT) cascades. The T106 series of airfoil cascades in both lightly (T106A) and highly loaded (T106C) configurations at exit isentropic Reynolds numbers of 60,000 and 80,000, respectively, are considered. The numerical simulations are performed using 8th–order accurate spatial and 4th–order accurate temporal discretizations. The changes in separation bubble topology due to elevated inflow turbulence are captured by the present method and the physical mechanisms leading to the changes are explained. The present results are in good agreement with prior numerical simulations but some expected discrepancies with the experimental data for the T106C case are noted and discussed.

scholarly journals DNS of Flow in a Low-Pressure Turbine Cascade Using a Discontinuous-Galerkin Spectral-Element Method

2015 ◽  
Author(s):  
Anirban Garai ◽  
Laslo Diosady ◽  
Scott Murman ◽  
Nateri Madavan
Keyword(s):  
Computer Architecture ◽  
Discontinuous Galerkin ◽  
High Performance ◽  
Spectral Element ◽  
Low Pressure ◽  
Computationally Efficient ◽  
Efficient Manner ◽  
Low Pressure Turbine ◽  
Eddy Simulation ◽  
Entropy Stable

A new computational capability under development for accurate and efficient high-fidelity direct numerical simulation (DNS) and large-eddy simulation (LES) of turbomachinery is described. This capability is based on an entropy-stable Discontinuous-Galerkin spectral-element approach that extends to arbitrarily high orders of spatial and temporal accuracy, and is implemented in a computationally efficient manner on a modern high performance computer architecture. A validation study using this method to perform DNS of flow in a low-pressure turbine airfoil cascade is presented. The results indicate that the method captures the main features of the flow.

scholarly journals Scale-Resolving Simulations of Low-Pressure Turbine Cascades With Wall Roughness Using a Spectral-Element Method

2018 ◽  
Author(s):  
Anirban Garai ◽  
Laslo T. Diosady ◽  
Scott M. Murman ◽  
Nateri K. Madavan
Keyword(s):  
Boundary Layer ◽  
Computer Architecture ◽  
Spectral Element ◽  
Low Pressure ◽  
Surface Boundary ◽  
Wall Roughness ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Low Pressure Turbine ◽  
Computational Capability

The accurate prediction of wall–roughness effects in turbomachinery is becoming critical as turbine designers address airfoil surface quality and degradation concerns arising from the shift to advanced ceramic matrix composite (CMC) or additively–manufactured airfoils operating in higher temperature environments. In this paper, a recently developed computational capability for accurate and efficient scale–resolving simulations of turbomachinery is extended to analyze the boundary–layer separation and transition characteristics in a rough–wall low–pressure turbine (LPT) cascade. The computational capability is based on an entropy–stable discontinuous–Galerkin spectral–element approach that extends to arbitrarily high orders of spatial and temporal accuracy, and is implemented in an efficient manner on a modern high–performance computer architecture. Results from the scale–resolving simulations of both smooth and rough airfoil cascades are presented and compared to previous experiments and numerical simulations. The results show that the suction–surface boundary layer undergoes laminar separation, transition, and turbulent reattachment for the smooth airfoil cascade, while in the presence of roughness the separation and transition behavior of the suction–surface boundary layer is substantially modified. The differences between the smooth and rough airfoil cascades are then highlighted by a detailed analysis of their respective turbulent flow fields.

scholarly journals Prediction of Transient Pressure Fluctuations within a Low-Pressure Turbine Cascade Using a Lanczos-Filtered Harmonic Balance Method

2021 ◽  
Vol 6 (3) ◽  
pp. 25
Author(s):  
Jan Philipp Heners ◽  
Stephan Stotz ◽  
Annette Krosse ◽  
Detlef Korte ◽  
Maximilian Beck ◽  
...  
Keyword(s):  
Turbulence Model ◽  
Harmonic Balance ◽  
Separation Bubble ◽  
Pressure Fluctuations ◽  
Harmonic Balance Method ◽  
Low Pressure ◽  
Filter Method ◽  
Turbine Cascade ◽  
Transient Pressure ◽  
Low Pressure Turbine

Unsteady pressure fluctuations measured by fast-response pressure transducers mounted in a low-pressure turbine cascade are compared to unsteady simulation results. Three differing simulation approaches are considered, one time-integration method and two harmonic balance methods either resolving or averaging the time-dependent components within the turbulence model. The observations are used to evaluate the capability of the harmonic balance solver to predict the transient pressure fluctuations acting on the investigated stator surface. Wakes of an upstream rotor are generated by moving cylindrical bars at a prescribed rotational speed that refers to a frequency of f∼500 Hz. The excitation at the rear part of the suction side is essentially driven by the presence of a separation bubble and is therefore highly dependent on the unsteady behavior of turbulence. In order to increase the stability of the investigated harmonic balance solver, a developed Lanczos-type filter method is applied if the turbulence model is considered in an unsteady fashion.

Exploitation of Subharmonics for Separated Shear Layer Control on a High-Lift Low-Pressure Turbine Using Acoustic Forcing

2013 ◽  
Vol 136 (5) ◽  
Author(s):  
Chiara Bernardini ◽  
Stuart I. Benton ◽  
Jen-Ping Chen ◽  
Jeffrey P. Bons
Keyword(s):  
Shear Layer ◽  
Separation Bubble ◽  
Boundary Layer Separation ◽  
Low Pressure ◽  
Linear Instability ◽  
Laminar Separation ◽  
Significant Control ◽  
Low Pressure Turbine ◽  
Separated Shear Layer ◽  
Sound Control

The mechanism of separation control by sound excitation is investigated on the aft-loaded low-pressure turbine (LPT) blade profile, the L1A, which experiences a large boundary layer separation at low Reynolds numbers. Previous work by the authors has shown that on a laminar separation bubble such as that experienced by the front-loaded L2F profile, sound excitation control has its best performance at the most unstable frequency of the shear layer due to the exploitation of the linear instability mechanism. The different loading distribution on the L1A increases the distance of the separated shear layer from the wall and the exploitation of the same linear mechanism is no longer effective in these conditions. However, significant control authority is found in the range of the first subharmonic of the natural unstable frequency. The amplitude of forced excitation required for significant wake loss reduction is higher than that needed when exploiting linear instability, but unlike the latter case, no threshold amplitude is found. The fluid-dynamics mechanisms under these conditions are investigated by particle image velocimetry (PIV) measurements. Phase-locked PIV data gives insight into the growth and development of structures as they are shed from the shear layer and merge to lock into the excited frequency. Unlike near-wall laminar separation sound control, it is found that when such large separated shear layers occur, sound excitation at subharmonics of the fundamental frequency is still effective with high-Tu levels.

Transition Mechanisms in Laminar Separated Flow Under Simulated Low Pressure Turbine Aerofoil Conditions

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
Jerrit Dähnert ◽  
Christoph Lyko ◽  
Dieter Peitsch
Keyword(s):  
Reynolds Number ◽  
Separation Bubble ◽  
Separated Flow ◽  
Low Pressure ◽  
Main Flow ◽  
Test Facility ◽  
Flow Conditions ◽  
Laminar Separation ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine

Based on detailed experimental work conducted at a low speed test facility, this paper describes the transition process in the presence of a separation bubble with low Reynolds number, low free-stream turbulence, and steady main flow conditions. A pressure distribution has been created on a long flat plate by means of a contoured wall opposite of the plate, matching the suction side of a modern low-pressure turbine aerofoil. The main flow conditions for four Reynolds numbers, based on suction surface length and nominal exit velocity, were varied from 80,000 to 300,000, which covers the typical range of flight conditions. Velocity profiles and the overall flow field were acquired in the boundary layer at several streamwise locations using hot-wire anemometry. The data given is in the form of contours for velocity, turbulence intensity, and turbulent intermittency. The results highlight the effects of Reynolds number, the mechanisms of separation, transition, and reattachment, which feature laminar separation-long bubble and laminar separation-short bubble modes. For each Reynolds number, the onset of transition, the transition length, and the general characteristics of separated flow are determined. These findings are compared to the measurement results found in the literature. Furthermore, the experimental data is compared with two categories of correlation functions also given in the literature: (1) correlations predicting the onset of transition and (2) correlations predicting the mode of separated flow transition. Moreover, it is shown that the type of instability involved corresponds to the inviscid Kelvin-Helmholtz instability mode at a dominant frequency that is in agreement with the typical ranges occurring in published studies of separated and free-shear layers.

On the Simulation and Spectral Analysis of Unsteady Turbulence and Transition Effects in a Multistage Low Pressure Turbine

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Georg Geiser ◽  
Jens Wellner ◽  
Edmund Kügeler ◽  
Anton Weber ◽  
Anselm Moors
Keyword(s):  
Frequency Domain ◽  
Large Scale ◽  
Separation Bubble ◽  
Pressure Fluctuations ◽  
Low Pressure ◽  
Transition Flow ◽  
Low Pressure Turbine ◽  
Wall Pressure Fluctuations ◽  
Frequency Domain Methods ◽  
Transition Effects

A nonlinear full-wheel time-domain simulation of a two-stage low pressure turbine is presented, analyzed, and compared with the available experimental data. Recent improvements to the computational fluid dynamics (CFD) solver TRACE that lead to significantly reduced wall-clock times for such large scale simulations are described in brief. Since the configuration is characterized by significant unsteady turbulence and transition effects, it is well suited for the validation and benchmarking of frequency-domain methods. Transition, flow separation and wall pressure fluctuations on the stator blades of the second stage are analyzed in detail. A strong azimuthal π-periodicity is observed, manifesting in a significantly varying stability of the midspan trailing edge flow with a quasi-steady closed separation bubble on certain blades and highly dynamic partially open separation bubbles with recurring transition and turbulent reattachment on other blades. The energy spectrum of fluctuating wall quantities in that regime shows a high bandwidth and considerable disharmonic content, which is challenging for frequency-domain-based simulation methods.

An Efficient High Performance Parallelization of a Discontinuous Galerkin Spectral Element Method

2013 ◽  
pp. 37-47 ◽  
Author(s):  
Christoph Altmann ◽  
Andrea D. Beck ◽  
Florian Hindenlang ◽  
Marc Staudenmaier ◽  
Gregor J. Gassner ◽  
...  
Keyword(s):  
Discontinuous Galerkin ◽  
High Performance ◽  
Spectral Element Method ◽  
Spectral Element ◽  
Element Method

The Effect of Wake Passing on a Flow Separation in a Low-Pressure Turbine Cascade

2004 ◽  
Vol 126 (2) ◽  
pp. 250-256 ◽  
Author(s):  
Michael J. Brear ◽  
Howard P. Hodson
Keyword(s):  
Separation Bubble ◽  
Phase Locking ◽  
Experimental Studies ◽  
Leading Edge ◽  
Low Pressure ◽  
Pressure Surface ◽  
Low Pressure Turbine ◽  
Numerical Predictions ◽  
Unsteady Interaction ◽  
Wake Passing

This paper describes an investigation into the effect that passing wakes have on a separation bubble that exists on the pressure surface and near the leading edge of a low-pressure turbine blade. Previous experimental studies have shown that the behavior of this separation is strongly incidence dependent and that it responds to its disturbance environment. The results presented in this paper examine the effect of wake passing in greater detail. Two-dimensional, Reynolds averaged, numerical predictions are first used to examine qualitatively the unsteady interaction between the wakes and the separation bubble. The separation is predicted to consist of spanwise vortices whose development is in phase with the wake passing. However, comparison with experiments shows that the numerical predictions exaggerate the coherence of these vortices and also overpredict the time-averaged length of the separation. Nonetheless, experiments strongly suggest that the predicted phase locking of the vortices in the separation onto the wake passing is physical.

Transition Mechanisms in Laminar Separated Flow Under Simulated Low Pressure Turbine Airfoil Conditions

2011 ◽  
Author(s):  
Jerrit Da¨hnert ◽  
Christoph Lyko ◽  
Dieter Peitsch
Keyword(s):  
Reynolds Number ◽  
Separation Bubble ◽  
Separated Flow ◽  
Low Pressure ◽  
Main Flow ◽  
Test Facility ◽  
Flow Conditions ◽  
Laminar Separation ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine

Based on detailed experimental work conducted at a low speed test facility, this paper describes the transition process in the presence of a separation bubble with low Reynolds number, low free-stream turbulence, and steady main flow conditions. A pressure distribution has been created on a long flat plate by means of a contoured wall opposite of the plate, matching the suction side of a modern low-pressure turbine aerofoil. The main flow conditions for four Reynolds numbers, based on suction surface length and nominal exit velocity, were varied from 80,000 to 300,000, which covers the typical range of flight conditions. Velocity profiles and the overall flow field were acquired in the boundary layer at several streamwise locations using hot-wire anemometry. The data given is in the form of contours for velocity, turbulence intensity, and turbulent intermittency. The results highlight the effects of Reynolds number, the mechanisms of separation, transition, and reattachment, which feature laminar separation-long bubble and laminar separation-short bubble modes. For each Reynolds number, the onset of transition, the transition length, and the general characteristics of separated flow are determined. These findings are compared to the measurement results found in the literature. Furthermore, the experimental data is compared with two categories of correlation functions also given in the open literature: (1) correlations predicting the onset of transition and (2) correlations predicting the mode of separated flow transition. Moreover, it is shown that the type of instability involved corresponds to the inviscid Kelvin-Helmholtz instability mode at a dominant frequency that is in agreement with the typical ranges occurring in published studies of separated and free-shear layers.

Sign in / Sign up

Export Citation Format

Share Document