Aerodynamic Performance Evaluation of a Novel Savonius-Style Wind Turbine Under an Oriented Jet

2014 ◽  
Author(s):  
Sukanta Roy ◽  
Prasenjit Mukherjee ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Small Scale ◽  
Practical Applications ◽  
Wind Speeds ◽  
Energy Applications

The Savonius-style wind turbine, a class of vertical axis wind turbines, can be a viable option for small scale off-grid electricity generation in the context of renewable energy applications. A better self-starting capability at low wind speeds is one of the major advantages of this turbine. However, as reported in open literature, the power coefficient of the conventional design is found to be inferior as compared to its counterparts. In this regard, a new blade design has been developed. In the present investigation, the aerodynamic performance of this newly designed turbine is assessed under an oriented jet. This is affected by installing deflectors upstream of the turbine blades. The intention of this study is to maximize the utilization of wind energy at the exhaust systems of several practical applications. Experiments are carried out in a low speed wind tunnel at a wind speed of 6.2 m/s. The gradual loads applied to the turbine, and the corresponding rotational speeds are recorded. Power and torque coefficients are calculated at various mechanical loads. Further, all the estimated data are corrected by a suitable correction factor to account for the wind tunnel blockage effects. The results obtained are compared with the experimental data of modified Bach and conventional designs. The results have shown a significant improvement in the performance of newly designed Savonius-style wind turbine under the concentrated and oriented jet.

scholarly journals Effect of Concentrator, Blade Diameter and Blade Number on the Savonius Wind Turbine Performance

2017 ◽  
Vol 5 (2) ◽  
Author(s):  
Ida Bagus Alit ◽  
Rudy Sutanto ◽  
I Made Mara ◽  
Mirmanto Mirmanto
Keyword(s):  
Wind Turbine ◽  
Concentration Ratio ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Wind Speeds ◽  
Vertical Axis Wind Turbines ◽  
Negative Moment ◽  
Low Efficiency ◽  
Low Wind Speeds

Savonius turbine is a type of vertical-axis wind turbines. The turbine has a potential to be developed as it has a simple construction and is suitable for low wind speeds. However, the turbine is still rarely used because of the low efficiency of the turbine compared to other turbines. The low efficiency of the turbine is due to the negative moment. Some efforts have been done to reduce the negative moment such as by adding a wind concentrator. The wind concentrator can steer the incoming wind toward the turbine blades that generate positive moments, consequently, the generated power increases. The aim of this research is to determine the effect of the number and diameter of the Savonius blade wind turbine with an additional concentrator. The concentrator had a concentration ratio of 6:1 and it was tested at the lower wind speeds of 2-5 m/s. The result shows that adding a wind concentrator can increase the rotational speed of the rotor, power coefficient, and the turbine power. The Savonius turbine with two blades has the best performance compared to the three and four blades. The Savonius blade wind turbine with the rotor diameter of 12 cm is the best Savonius turbine for the concentration ratio of 6:1.

scholarly journals 2D CFD Simulation Study on the Performance of Various NACA Airfoils

CFD letters ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 38-50
Author(s):  
Mark Jason Thomas Loutun ◽  
Djamal Hissein Didane ◽  
Mohd Faizal Mohideen Batcha ◽  
Kamil Abdullah ◽  
Mas Fawzi Mohd Ali ◽  
...  
Keyword(s):  
Energy Source ◽  
Wind Turbine ◽  
Computational Models ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
The Other ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine

The wind is an energy source that has the properties of a clean, free, and readily available energy source. However, the efficiency of the existing rotors used to harness wind power is still not satisfactory. Thus, in this current study, the development and aerodynamic performance investigation of ten NACA airfoils comprising of five symmetrical and five non-symmetrical airfoils have been analyzed through the computational fluids dynamic (CFD) simulation approach. The main motive of this study was to investigate the aerodynamic performance of NACA airfoils to be used on a vertical axis wind turbine (VAWT), which will assist in further understanding the physics of the interaction between airflow and the wind turbine blades. The simulation was performed using two-dimensional computational models based on an unsteady state K-omega Shear Stress Transport (SST) turbulence model. This study covers a parametric study based on the variations of tip-speed ratios and constant wind velocity. The aerodynamic performances are evaluated in terms of torque, torque coefficient, and also power coefficient. The performance of NACA0018 was found to be the best among the other airfoils with a power coefficient of 0.3. NACA0010 displayed the lowest power coefficient among the other airfoils but had a more extensive operating range compared to the other airfoils. However, for non-symmetrical NACA airfoils, NACA2421 scored the highest power coefficient, followed by NACA4412. It was also found that most of the non-symmetrical NACA airfoils can operate at a higher range of tip-speed ratios compared to the symmetrical NACA airfoils.

Aerodynamic Performance Analysis of Three Bladed Savonius Wind Turbine With Different Overlap Ratios and at Various Reynolds Number

2010 ◽  
Author(s):  
Mosfequr Rahman ◽  
Khandakar N. Morshed ◽  
Ahsan Mian
Keyword(s):  
Reynolds Number ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Alternative Energy ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Small Scale ◽  
Scale Models ◽  
Savonius Wind Turbine

Considerable improvements in the aerodynamic performance of a vertical axis wind turbine (VAWT) can be achieved by integrating computational fluid dynamics (CFD) simulation and wind tunnel investigation in their design improvement. With the growing demand for energy worldwide, conventional sources are becoming more scarce and expensive. Wind is among the most popular and fastest growing sources of alternative energy in the world. It is an inexhaustible, indigenous resource, pollution-free, and available almost any time of the day, especially in coastal regions. Industry experts predict that, with proper development, wind energy could provide 20% of the nation’s energy needs. Vertical axis wind turbines (VAWTs) may be as efficient and practical as, and simpler, and significantly cheaper to build and maintain than, horizontal axis wind turbines (HAWTs). They have other inherent advantages; for example, they always face the wind. VAWTs include both a drag-type configuration, such as the Savonius rotor, and a lift-type configuration, such as the Darrieus rotor. The Savonius wind turbine is the simplest. Its operation depends on the difference in drag force when the wind strikes either the convex or concave part of its semi-cylindrical blades. It is good at self-starting and works independently of wind direction. However, its efficiency is relatively lower than that of the lift-type VAWTs. Due to its simple design and low construction cost, Savonius rotors are primarily used for water pumping and to generate wind power on a small scale and its large starting torque makes it suitable for starting other types of wind turbines that have inferior starting characteristics. Recently, some generators with high torque at low rotational speed, suitable for small-scale wind turbines, have been developed, suggesting that Savonius rotors may yet be used to generate electric power. The main goal of this research work is to improve the aerodynamic performance of the three bladed vertical axis Savonius wind turbine. Based on this goal, the objective of this project is to study the performance characteristics of the Savonius wind turbine scale models both experimentally and numerically. The turbine scale models will have different designs with different overlap ratios (ratio of gap between two adjacent blades and the rotor diameter) and without overlap within three blades. The experimental measurements and testing will be conducted in front of a low speed subsonic wind tunnel at different Reynolds number and the computational fluid dynamic (CFD) flow simulation around those design models will be performed by commercial CFD software FLUENT and GAMBIT.

scholarly journals Numerical evaluation of aerodynamic performances of vertical-axis wind turbine rotor with flow concentrator

2020 ◽  
Author(s):  
Jelena Svorcan ◽  
◽  
Ognjen Peković ◽  
Toni Ivanov ◽  
Miloš Vorkapić ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Operating Conditions ◽  
Power Coefficient ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Flow Simulations ◽  
Wind Speeds

With wind energy extraction constantly increasing, the interest in small-scale urban wind turbines is also expanding. Given that these machines often work in adverse operating conditions (Earth’s boundary layer, vortex trails of surrounding objects, small and changeable wind speeds), additional elements that locally augment wind velocity and facilitate turbine start may be installed. This paper investigates possible benefits of adding an optimized flow concentrator to a vertical-axis wind turbine (VAWT) rotor. Three-dimensional, unsteady, turbulent, incompressible flow simulations of both isolated rotor consisting of three straight blades and a rotor with flow concentrator have been performed in ANSYS FLUENT by finite volume method for several different operational regimes. This type of flow simulations is challenging since flow angles are high, numerous flow phenomena and instabilities are present and the interaction between the blades and detached vortices can be significant. The rotational motion of the blades is solved by the unsteady Sliding Mesh (SM) approach. Flow field is modeled by Unsteady Reynolds Averaged Navier-Stokes (URANS) equations with k-ω SST turbulence model used for closure. Both quantitative and qualitative examinations of the obtained numerical results are presented. In particular, the two computed power coefficient curves are compared and the advantages of installing a flow concentrator are accentuated.

scholarly journals Analysis of the suitability of using the selected wind turbine blades for wind power appliances based on numerical analyses

2018 ◽  
Vol 46 ◽  
pp. 00006
Author(s):  
Krzysztof Pytel ◽  
Szymon Szpin ◽  
Wiktor Hudy ◽  
Małgorzata Piaskowska–Silarska ◽  
Stanisław Gumuła
Keyword(s):  
Wind Turbine ◽  
Wind Power ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Numerical Analyses ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Air Stream

The aim of this study was a comparative analysis of the suitability of the use of airfoil for wind power. Based on numerical analyses and analytical methods, information on the power factor was obtained. The analyses were carried out for the wind turbine blades and rotors of a vertical axis wind turbine. The tests were performed for the constructed profile and compared with the profile DU 06-W-200 used in the construction of a wind turbine rotors. A vertical axis wind turbine model equipped with designed blade profiles was prepared. The main predicted purpose of the device is to supply electricity to the household. The blade profile models were prepared and then a numerical analysis was performed using the CFD application. The obtained results for given wind speeds and types of profiles were compared with each other. The conducted research allowed to determine the sense of applying the unaudited profile based on the determined value of wind turbine power coefficient. Studies have shown that the accurate preparation of the optimal rotor blade with respect to flow of air stream strongly influences the characteristics of the wind turbine.

Investigation of Aerodynamic Performance of Helical Shape Vertical-Axis Wind Turbine Models With Various Number of Blades Using Wind Tunnel Testing and Computational Fluid Dynamics

2016 ◽  
Author(s):  
Mosfequr Rahman ◽  
Travis Salyers ◽  
Mahbub Ahmed ◽  
Adel ElShahat ◽  
Valentin Soloiu ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Twist Angle ◽  
Average Power ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Wind Tunnel Testing ◽  
Vertical Axis Wind Turbine ◽  
Wind Speeds ◽  
Tunnel Testing

The demand for wind energy as a renewable source is rising substantially. A growing interest exists in utilizing potential energy conversion applications in areas with less powerful and less consistent wind conditions. In these areas, vertical-axis wind turbines (VAWTs) possess several advantages over the conventional horizontal-axis type. Savonius turbines are drag-based rotors which operate due to a pressure difference between the advancing and retreating blades. These turbines are simpler in design, less expensive to install, independent of wind direction, and more efficient at low wind speeds. In the present study, rotors were designed with semi-circle blades consisting of a helical shape with twist angle of 90 degrees. Helical designs spread the torque applied to the rotor over a complete revolution with the purpose of increasing efficiency. Three models were analyzed with different number of blades including 2, 3, and 4 blade models. Models for testing were designed using the CAD software SolidWorks. The blades were then 3D printed with PLA plastic. A consistent swept area was maintained for each model, and only blade number was varied. Subsonic, open-type wind tunnel testing was used for measuring RPM and reactional torque over a range of wind speeds. For the numerical approach, ANSYS Fluent simulations were used for analyzing aerodynamic performance by utilizing moving reference frame and sliding mesh model techniques. Due to the helical twist, the cross-section of the blades varied in the Y-direction. Because of this, a 3-dimensional and transient method was used for accurately solving torque and power coefficients. It has been found that the highest average power coefficient observed in the study is achieved by the Helical2 model (2-bladed helical design VAWT model), both numerically and experimentally.

scholarly journals Canard optimization for enhancing the performance of small horizontal axis wind turbine at low wind speeds

2020 ◽  
Vol 37 ◽  
pp. 63-71
Author(s):  
Yui-Chuin Shiah ◽  
Chia Hsiang Chang ◽  
Yu-Jen Chen ◽  
Ankam Vinod Kumar Reddy
Keyword(s):  
Wind Turbine ◽  
Urban Areas ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Peak Performance ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Optimum Parameters ◽  
Low Wind Speeds

ABSTRACT Generally, the environmental wind speeds in urban areas are relatively low due to clustered buildings. At low wind speeds, an aerodynamic stall occurs near the blade roots of a horizontal axis wind turbine (HAWT), leading to decay of the power coefficient. The research targets to design canards with optimal parameters for a small-scale HAWT system operated at variable rotational speeds. The design was to enhance the performance by delaying the aerodynamic stall near blade roots of the HAWT to be operated at low wind speeds. For the optimal design of canards, flow fields of the sample blades with and without canards were both simulated and compared with the experimental data. With the verification of our simulations, Taguchi analyses were performed to seek the optimum parameters of canards. This study revealed that the peak performance of the optimized canard system operated at 540 rpm might be improved by ∼35%.

scholarly journals Numerical Simulation of Aerodynamic Performance of Off-grid Small Vertical Axis Wind Turbine

2018 ◽  
Vol 53 ◽  
pp. 02004
Author(s):  
Qiuyun Mo ◽  
Jiabei Yin ◽  
Lin Chen ◽  
Weihao Liu ◽  
Li Jiang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Velocity Fields ◽  
Compact Model ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
Rotation Domain ◽  
Rng Turbulence Model

In this paper, a 2D off-grid small compact model of vertical axis wind turbine was established. The sliding grid technology, the RNG turbulence model and the Coupld algorithm was applied to simulate the unsteady value of the model's aerodynamic performance. Through the analysis on the flow field at difference moments, the rules about velocity fields, vortices distributions and the wind turbine's total torque were obtained. The results show that: the speed around wind turbine blades have obvious gradient, and the velocity distribution at different times show large differences in the computional domain. In the rotating domain vorticity is large. With away from the rotation domain, vorticity reduced quickly. In the process of rotating for vertical axis wind turbine, the wind turbine's total torque showed alternating positive and negative changes.

scholarly journals Numerical optimisation of a small-scale wind turbine through the use of surrogate modelling

2017 ◽  
Vol 28 (3) ◽  
pp. 79 ◽  
Author(s):  
Gareth Erfort ◽  
Theodor Willem Von Backström ◽  
Gerhard Venter
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbine ◽  
Surrogate Model ◽  
Turbine Blades ◽  
Small Scale ◽  
Final Solution ◽  
B Splines ◽  
Wind Speeds ◽  
Wide Range ◽  
Numerical Optimisation

Wind conditions in South Africa are suitable for small-scale wind turbines, with wind speeds below 7 m.s−1. This investigation is about a methodology to optimise a full wind turbine using a surrogate model. A previously optimised turbine was further optimised over a range of wind speeds in terms of a new parameterisation methodology for the aerodynamic profile of the turbine blades, using non-uniform rational B-splines to encompass a wide range of possible shapes. The optimisation process used a genetic algorithm to evaluate an input vector of 61 variables, which fully described the geometry, wind conditions and rotational speed of the turbine. The optimal performance was assessed according to a weighted coefficient of power, which rated the turbine blade’s ability to extract power from the available wind stream. This methodology was validated using XFOIL to assess the final solution. The results showed that the surrogate model was successful in providing an optimised solution and, with further refinement, could increase the coefficient of power obtained.

scholarly journals Double multiple stream tube theory coupled with dynamic stall and wake correction for aerodynamic investigation of vertical axis wind turbine

2020 ◽  
Vol 23 (4) ◽  
pp. 771-780
Author(s):  
Anh Ngoc VU ◽  
Ngoc Son Pham
Keyword(s):  
Wind Turbine ◽  
Shape Function ◽  
Vertical Axis ◽  
Transformation Method ◽  
Aerodynamic Performance ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Stream Tube ◽  
Aerodynamic Investigation

This study describes an effectively analytic methodology to investigate the aerodynamic performance of H vertical axis wind turbine (H-VAWT). An in-house code based on double multiple stream tube theory (DMST) coupled with dynamic stall and wake correction is implemented to estimate the power coefficient. Design optimization of airfoil shape is conducted to study the influences of the dynamic stall and turbulent wakes. Airfoil shape is universally investigated by using the Class/Shape function transformation method. The airfoil study shows that the upper curve tends to be less convex than the lower curve in order to extract more energy of the wind upstream and generate less drag of the blade downstream. The optimal results show that the power coefficient increases by 6.5% with the new airfoil shape.

Sign in / Sign up

Export Citation Format

Share Document