scholarly journals Effect of Concentrator, Blade Diameter and Blade Number on the Savonius Wind Turbine Performance

2017 ◽  
Vol 5 (2) ◽  
Author(s):  
Ida Bagus Alit ◽  
Rudy Sutanto ◽  
I Made Mara ◽  
Mirmanto Mirmanto
Keyword(s):  
Wind Turbine ◽  
Concentration Ratio ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Wind Speeds ◽  
Vertical Axis Wind Turbines ◽  
Negative Moment ◽  
Low Efficiency ◽  
Low Wind Speeds

Savonius turbine is a type of vertical-axis wind turbines. The turbine has a potential to be developed as it has a simple construction and is suitable for low wind speeds. However, the turbine is still rarely used because of the low efficiency of the turbine compared to other turbines. The low efficiency of the turbine is due to the negative moment. Some efforts have been done to reduce the negative moment such as by adding a wind concentrator. The wind concentrator can steer the incoming wind toward the turbine blades that generate positive moments, consequently, the generated power increases. The aim of this research is to determine the effect of the number and diameter of the Savonius blade wind turbine with an additional concentrator. The concentrator had a concentration ratio of 6:1 and it was tested at the lower wind speeds of 2-5 m/s. The result shows that adding a wind concentrator can increase the rotational speed of the rotor, power coefficient, and the turbine power. The Savonius turbine with two blades has the best performance compared to the three and four blades. The Savonius blade wind turbine with the rotor diameter of 12 cm is the best Savonius turbine for the concentration ratio of 6:1.

scholarly journals Investigations on the Effect of Radius Rotor in Combined Darrieus-Savonius Wind Turbine

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Kaprawi Sahim ◽  
Dyos Santoso ◽  
Dewi Puspitasari
Keyword(s):  
Wind Turbine ◽  
Wind Tunnel Test ◽  
Vertical Axis ◽  
Radius Ratio ◽  
Small Scale ◽  
Wind Speeds ◽  
Vertical Axis Wind Turbines ◽  
Savonius Wind Turbine ◽  
Darrieus Rotor ◽  
Low Wind Speeds

Renewable sources of energy, abundant in availability, are needed to be exploited with adaptable technology. For wind energy, the wind turbine is very well adapted to generate electricity. Among the different typologies, small scale Vertical Axis Wind Turbines (VAWT) present the greatest potential for off-grid power generation at low wind speeds. The combined Darrieus-Savonius wind turbine is intended to enhance the performance of the Darrieus rotor in low speed. In combined turbine, the Savonius buckets are always attached at the rotor shaft and the Darrieus blades are installed far from the shaft which have arm attaching to the shaft. A simple combined turbine offers two rotors on the same shaft. The combined turbine that consists of two Darrieus and Savonius blades was tested in wind tunnel test section with constant wind velocity and its performance was assessed in terms of power and torque coefficients. The study gives the effect of the radius ratio between Savonius and Darrieus rotor on the performance of the turbine. The results show that there is a significant influence on the turbine performance if the radius ratio was changed.

scholarly journals Potential of Shrouded Micro Wind Turbine

2017 ◽  
Vol 7 (2 (S)) ◽  
pp. 340
Author(s):  
Kishor Sontakke ◽  
Samir Deshmukh ◽  
Sandip Patil
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Renewable Energy Sources ◽  
Turbine Blades ◽  
Weather Conditions ◽  
Power Coefficient ◽  
Solar Panels ◽  
Wind Speeds ◽  
Low Wind Speeds

The growing demand for electrical energy for industrial and domestic use, coupled with the limited amount of available fossil fuel reserves and its negative effects on the environment, have made it necessary to seek alternative and renewable energy sources. The use of renewable energy is promoted worldwide to be less dependent on conventional fuels and nuclear energy. Therefore research in the field is motivated to increase efficiency of renewable energy systems. This study aimed to study potential of micro wind turbine and velocity profile through shroud for low wind speeds. Although there is a greater inclination to use solar panels because of the local weather conditions, there are some practical implications that have place the use of solar panels in certain areas to an end. The biggest problem is panel stealing. Also, in some parts of the country the weather is more appropriate to apply wind turbines. Thus, this study paying attention on the design of a new concept to improve wind turbines to be appropriate for the low wind speeds in India. The concept involves the implementation of a concentrator and diffuser to a wind turbine, to increase the power coefficient. Although the wind turbine was not tested for starting speeds, the realization of the shroud should contribute to improved starting of the wind turbine at lower wind speeds. The configuration were not manufactured, but simulated with the use of a program to obtain the power production of the wind turbine over a range of wind speeds. These values were compared to measured results of an open wind turbine developed. The most important topic at hand when dealing with a shrouded wind turbine is to find out if the overall diameter or the blade diameter of the turbine should be the point of reference. As the wind turbine is situated in a shroud that has a larger diameter than the turbine blades, some researchers believe that the overall diameter should be used to calculate the efficiency. The benefits of shrouded wind turbines are discussed.

scholarly journals Analysis of the suitability of using the selected wind turbine blades for wind power appliances based on numerical analyses

2018 ◽  
Vol 46 ◽  
pp. 00006
Author(s):  
Krzysztof Pytel ◽  
Szymon Szpin ◽  
Wiktor Hudy ◽  
Małgorzata Piaskowska–Silarska ◽  
Stanisław Gumuła
Keyword(s):  
Wind Turbine ◽  
Wind Power ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Numerical Analyses ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Air Stream

The aim of this study was a comparative analysis of the suitability of the use of airfoil for wind power. Based on numerical analyses and analytical methods, information on the power factor was obtained. The analyses were carried out for the wind turbine blades and rotors of a vertical axis wind turbine. The tests were performed for the constructed profile and compared with the profile DU 06-W-200 used in the construction of a wind turbine rotors. A vertical axis wind turbine model equipped with designed blade profiles was prepared. The main predicted purpose of the device is to supply electricity to the household. The blade profile models were prepared and then a numerical analysis was performed using the CFD application. The obtained results for given wind speeds and types of profiles were compared with each other. The conducted research allowed to determine the sense of applying the unaudited profile based on the determined value of wind turbine power coefficient. Studies have shown that the accurate preparation of the optimal rotor blade with respect to flow of air stream strongly influences the characteristics of the wind turbine.

Aerodynamic Performance Evaluation of a Novel Savonius-Style Wind Turbine Under an Oriented Jet

2014 ◽  
Author(s):  
Sukanta Roy ◽  
Prasenjit Mukherjee ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Small Scale ◽  
Practical Applications ◽  
Wind Speeds ◽  
Energy Applications

The Savonius-style wind turbine, a class of vertical axis wind turbines, can be a viable option for small scale off-grid electricity generation in the context of renewable energy applications. A better self-starting capability at low wind speeds is one of the major advantages of this turbine. However, as reported in open literature, the power coefficient of the conventional design is found to be inferior as compared to its counterparts. In this regard, a new blade design has been developed. In the present investigation, the aerodynamic performance of this newly designed turbine is assessed under an oriented jet. This is affected by installing deflectors upstream of the turbine blades. The intention of this study is to maximize the utilization of wind energy at the exhaust systems of several practical applications. Experiments are carried out in a low speed wind tunnel at a wind speed of 6.2 m/s. The gradual loads applied to the turbine, and the corresponding rotational speeds are recorded. Power and torque coefficients are calculated at various mechanical loads. Further, all the estimated data are corrected by a suitable correction factor to account for the wind tunnel blockage effects. The results obtained are compared with the experimental data of modified Bach and conventional designs. The results have shown a significant improvement in the performance of newly designed Savonius-style wind turbine under the concentrated and oriented jet.

scholarly journals Canard optimization for enhancing the performance of small horizontal axis wind turbine at low wind speeds

2020 ◽  
Vol 37 ◽  
pp. 63-71
Author(s):  
Yui-Chuin Shiah ◽  
Chia Hsiang Chang ◽  
Yu-Jen Chen ◽  
Ankam Vinod Kumar Reddy
Keyword(s):  
Wind Turbine ◽  
Urban Areas ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Peak Performance ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Optimum Parameters ◽  
Low Wind Speeds

ABSTRACT Generally, the environmental wind speeds in urban areas are relatively low due to clustered buildings. At low wind speeds, an aerodynamic stall occurs near the blade roots of a horizontal axis wind turbine (HAWT), leading to decay of the power coefficient. The research targets to design canards with optimal parameters for a small-scale HAWT system operated at variable rotational speeds. The design was to enhance the performance by delaying the aerodynamic stall near blade roots of the HAWT to be operated at low wind speeds. For the optimal design of canards, flow fields of the sample blades with and without canards were both simulated and compared with the experimental data. With the verification of our simulations, Taguchi analyses were performed to seek the optimum parameters of canards. This study revealed that the peak performance of the optimized canard system operated at 540 rpm might be improved by ∼35%.

A Performance Comparison of Three Micro-Sized Blade Rotor Designs for Malaysia Wind Speed Condition

2015 ◽  
Vol 785 ◽  
pp. 310-314 ◽  
Author(s):  
Norzanah Rosmin ◽  
N.A. Rahman ◽  
A.H. Mustaamal
Keyword(s):  
Electrical Power ◽  
Vertical Axis ◽  
Performance Comparison ◽  
Power Coefficient ◽  
Small Scale ◽  
Experimental Setup ◽  
Wind Speeds ◽  
Vertical Axis Wind Turbines ◽  
Speed Up ◽  
Electrical Generation

Vertical-Axis Wind Turbines (VAWTs) are known as the most suitable wind turbine for small-scale electrical generation. There are many types of VAWTs and each of it has different performances and efficiency. In this work, three types of VAWT systems (Savo-B2, Savo-B4 and Giro-B3) were designed, constructed and tested to investigate the amount of electrical power that could be generated under several constant wind speeds. The blade rotors were designed and built using 2 mm thickness of aluminum plate. The tip speed ratios, power coefficients, blade rotations for each blade rotor and the simplicity of the proposed designs were studied via an experimental setup. The experimental work demonstrates that Savo-B2 provides the highest power coefficient which is up to 0.32. Meanwhile, Giro-B3 offers the fastest rotational blade speed, up to 20.53 rad/s, among the three designs.

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

scholarly journals Analysis of the Patent of a Protective Cover for Vertical-Axis Wind Turbines (VAWTs): Simulations of Wind Flow

2020 ◽  
Vol 12 (18) ◽  
pp. 7818
Author(s):  
Jose Alberto Moleón Baca ◽  
Antonio Jesús Expósito González ◽  
Candido Gutiérrez Montes
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
High Speed ◽  
Experimental Tests ◽  
Weather Conditions ◽  
Vertical Axis ◽  
Good Alternative ◽  
Wind Speeds ◽  
Vertical Axis Wind Turbines

This paper presents a numerical and experimental analysis of the patent of a device to be used in vertical-axis wind turbines (VAWTs) under extreme wind conditions. The device consists of two hemispheres interconnected by a set of conveniently implemented variable section ducts through which the wind circulates to the blades. Furthermore, the design of the cross-section of the ducts allows the control of the wind speed inside the device. These ducts are intended to work as diffusers or nozzles, depending on the needs of the installation site. Simulations were performed for the case of high-speed external wind, for which the ducts act as diffusers to reduce wind speed and maintain a well-functioning internal turbine. Four different patent designs were analyzed, focusing on turbine performance and generated power. The results indicate that the patent allows the generation of electric power for a greater range of wind speeds than with a normal wind turbine. The results support that this patent may be a good alternative for wind power generation in geographic areas with extreme weather conditions or with maintained or strong gusty wind. Experimental tests were carried out on the movement of the blades using the available model. Finally, the power curve of the model of this wind turbine was obtained.

scholarly journals Numerical Investigations of the Effects of the Rotating Shaft and Optimization of Urban Vertical Axis Wind Turbines

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1870 ◽  
Author(s):  
Lidong Zhang ◽  
Kaiqi Zhu ◽  
Junwei Zhong ◽  
Ling Zhang ◽  
Tieliu Jiang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Suction Side ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Physical Parameters ◽  
Rotating Shaft ◽  
Vertical Axis Wind Turbines ◽  
Negative Effect

The central shaft is an important and indispensable part of a small scale urban vertical axis wind turbines (VAWTs). Normally, it is often operated at the same angular velocity as the wind turbine. The shedding vortices released by the rotating shaft have a negative effect on the blades passing the wake of the wind shaft. The objective of this study is to explore the influence of the wake of rotating shaft on the performance of the VAWT under different operational and physical parameters. The results show that when the ratio of the shaft diameter to the wind turbine diameter (α) is 9%, the power loss of the wind turbine in one revolution increases from 0% to 25% relative to that of no-shaft wind turbine (this is a numerical experiment for which the shaft of the VAWT is removed in order to study the interactions between the shaft and blade). When the downstream blades pass through the wake of the shaft, the pressure gradient of the suction side and pressure side is changed, and an adverse effect is also exerted on the lift generation in the blades. In addition, α = 5% is a critical value for the rotating shaft wind turbine (the lift-drag ratio trend of the shaft changes differently). In order to figure out the impacts of four factors; namely, tip speed ratios (TSRs), α, turbulence intensity (TI), and the relative surface roughness value (ks/ds) on the performance of a VAWT system, the Taguchi method is employed in this study. The influence strength order of these factors is featured by TSRs > ks/ds > α > TI. Furthermore, within the range we have analyzed in this study, the optimal power coefficient (Cp) occurred under the condition of TSR = 4, α = 5%, ks/ds = 1 × 10−2, and TI = 8%.

Sign in / Sign up

Export Citation Format

Share Document