Slippage and Wetting Transition of Water Flow in Superhydrophobic Micro-Channel

2008 ◽  
Author(s):  
Doyoung Byun ◽  
Jihoon Kim ◽  
Jongin Hong
Keyword(s):  
Particle Image ◽  
Slip Length ◽  
Vertical Wall ◽  
Wetting Transition ◽  
Micro Channel ◽  
Liquid Meniscus ◽  
Micro Particle Image Velocimetry ◽  
Image Velocimetry ◽  
Slippage Effect ◽  
Groove Structure

We investigate the slippage effect in a super-hydrophobic micro-channel. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (PIV). The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves. Also depending on the ratio of pitch to width of the groove structure, the water meniscus status can be either sustained between the valleys or collapsed to be wet. This Cassie to Wenzel transition is observed in the micro-channel. And we investigate the effects of grooves shape and the flow rate on the wetting transition.

Flow Characteristics of Pressure-Driven Water in Serpentine Micro-Channels

2006 ◽  
Author(s):  
Renqiang Xiong ◽  
J. N. Chung
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Flow Characteristics ◽  
Flow Structures ◽  
Micro Channel ◽  
Pressure Drops ◽  
Micro Particle Image Velocimetry ◽  
Image Velocimetry ◽  
Micro Channels ◽  
Shape And Size

Flow structures and pressure drops were investigated in rectangular serpentine micro-channels with miter bends which had hydraulic diameters of 0.209mm, 0.395mm and 0.549mm respectively. To evaluate the bend effect, the additional pressure drop due to the miter bend must be obtained. Three groups of micro-channels were fabricated to remove the inlet and outlet losses. A validated micro-particle image velocimetry (μPIV) system was used to achieve the flow structure in a serpentine micro-channel with hydraulic diameter of 0.173mm. The experimental results show the vortices around the outer and inner walls of the bend do not form when Re<100. Those vortices appear and continue to develop with the Re number when Re> 100-300, and the shape and size of the vortices almost remain constant when Re>1000. The bend loss coefficient Kb was observed to be related with the Re number when Re<100, with the Re number and channel size when Re>100. It almost keeps constant and changes in the range of ± 10% When Re is larger than some value in 1300-1500. And a size effect on Kb was also observed.

An experimental and numerical study of the resonant flow between a hull and a wall

2021 ◽  
Vol 930 ◽  
Author(s):  
I.A. Milne ◽  
O. Kimmoun ◽  
J.M.R. Graham ◽  
B. Molin
Keyword(s):  
Vortex Shedding ◽  
Particle Image ◽  
Numerical Study ◽  
Numerical Models ◽  
Vertical Wall ◽  
Liquefied Natural Gas ◽  
Narrow Gap ◽  
Image Velocimetry ◽  
High Degree ◽  
Wave Induced

The wave-induced resonant flow in a narrow gap between a stationary hull and a vertical wall is studied experimentally and numerically. Vortex shedding from the sharp bilge edge of the hull gives rise to a quadratically damped free surface response in the gap, where the damping coefficient is approximately independent of wave steepness and frequency. Particle image velocimetry and direct numerical simulations were used to characterise the shedding dynamics and explore the influence of discretisation in the measurements and computations. Secondary separation was identified as a particular feature which occurred at the hull bilge in these gap flows. This can result in the generation of a system with multiple vortical regions and asymmetries between the inflow and outflow. The shedding dynamics was found to exhibit a high degree of invariance to the amplitude in the gap and the spanwise position of the barge. The new measurements and the evaluation of numerical models of varying fidelity can assist in informing offshore operations such as the side by side offloading from floating liquefied natural gas facilities.

scholarly journals A Review of Planar PIV Systems and Image Processing Tools for Lab-On-Chip Microfluidics

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 3090 ◽  
Author(s):  
Fahrettin Ergin ◽  
Bo Watz ◽  
Nicolai Gade-Nielsen
Keyword(s):  
Image Processing ◽  
Particle Image Velocimetry ◽  
Particle Image ◽  
Relevant Information ◽  
Droplet Formation ◽  
Field Investigation ◽  
Cell Counting ◽  
Lab On Chip ◽  
Micro Particle Image Velocimetry ◽  
Image Velocimetry

Image-based sensor systems are quite popular in micro-scale flow investigations due to their flexibility and scalability. The aim of this manuscript is to provide an overview of current technical possibilities for Particle Image Velocimetry (PIV) systems and related image processing tools used in microfluidics applications. In general, the PIV systems and related image processing tools can be used in a myriad of applications, including (but not limited to): Mixing of chemicals, droplet formation, drug delivery, cell counting, cell sorting, cell locomotion, object detection, and object tracking. The intention is to provide some application examples to demonstrate the use of image processing solutions to overcome certain challenges encountered in microfluidics. These solutions are often in the form of image pre- and post-processing techniques, and how to use these will be described briefly in order to extract the relevant information from the raw images. In particular, three main application areas are covered: Micro mixing, droplet formation, and flow around microscopic objects. For each application, a flow field investigation is performed using Micro-Particle Image Velocimetry (µPIV). Both two-component (2C) and three-component (3C) µPIV systems are used to generate the reported results, and a brief description of these systems are included. The results include detailed velocity, concentration and interface measurements for micromixers, phase-separated velocity measurements for the micro-droplet generator, and time-resolved (TR) position, velocity and flow fields around swimming objects. Recommendations on, which technique is more suitable in a given situation are also provided.

Characterization of Convection Patterns During the Solidification Process Using Particle Image Velocimetry

2003 ◽  
Author(s):  
C. Ghenai ◽  
R. K. Duggirala ◽  
C. X. Lin ◽  
M. A. Ebadian
Keyword(s):  
Particle Image Velocimetry ◽  
Temperature Distribution ◽  
Ammonium Chloride ◽  
Particle Image ◽  
Vertical Wall ◽  
Solidification Process ◽  
Convection Flow ◽  
Initial Concentration ◽  
Image Velocimetry ◽  
Convection Patterns

This experimental study focused mainly on the solidification of a binary mixture of ammonium chloride and water (NH4Cl-H2O) in a differentially heated cavity. One vertical wall is cooled at temperature TC, and the opposite vertical wall is kept at constant temperature TH = +20°C. The effect on the solidification process of the initial concentration of ammonium chloride and cooling conditions is examined. Particle image velocimetry (PIV) is used for the visualization of the dynamic field during the solidification process. The temperature distribution at discrete locations in the solution and on the vertical cooling wall was monitored using thermocouples. The convection flow patterns, the ice thickness, and the temperature distribution were obtained for various initial concentrations of ammonium chloride ranging from 0wt% to 20wt% (sub-eutectic and near-eutectic growth). The convection patterns obtained for different initial concentrations showed significant differences. The results showed that the process of solidification is slower with an increase in the initial concentration levels of the binary solution. The ice growth rate was almost double at the bottom of the cavity.

scholarly journals Experimental and Numerical Study of Blood Flow in μ-vessels: Influence of the Fahraeus–Lindqvist Effect

Fluids ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 143
Author(s):  
Yorgos G. Stergiou ◽  
Aggelos T. Keramydas ◽  
Antonios D. Anastasiou ◽  
Aikaterini A. Mouza ◽  
Spiros V. Paras
Keyword(s):  
Blood Flow ◽  
Axial Velocity ◽  
Particle Image ◽  
Numerical Study ◽  
Implantable Devices ◽  
Cfd Simulations ◽  
Micro Particle Image Velocimetry ◽  
Image Velocimetry ◽  
Computational Fluid Dynamics Cfd ◽  
Cell Free Layer

The study of hemodynamics is particularly important in medicine and biomedical engineering as it is crucial for the design of new implantable devices and for understanding the mechanism of various diseases related to blood flow. In this study, we experimentally identify the cell free layer (CFL) width, which is the result of the Fahraeus–Lindqvist effect, as well as the axial velocity distribution of blood flow in microvessels. The CFL extent was determined using microscopic photography, while the blood velocity was measured by micro-particle image velocimetry (μ-PIV). Based on the experimental results, we formulated a correlation for the prediction of the CFL width in small caliber (D < 300 μm) vessels as a function of a modified Reynolds number (Re∞) and the hematocrit (Hct). This correlation along with the lateral distribution of blood viscosity were used as input to a “two-regions” computational model. The reliability of the code was checked by comparing the experimentally obtained axial velocity profiles with those calculated by the computational fluid dynamics (CFD) simulations. We propose a methodology for calculating the friction loses during blood flow in μ-vessels, where the Fahraeus–Lindqvist effect plays a prominent role, and show that the pressure drop may be overestimated by 80% to 150% if the CFL is neglected.

Sign in / Sign up

Export Citation Format

Share Document