The Effect of Isolated Air Mass and Fuel/Air Ratio on the Efficiency of Isolated Combustion and Diluted Expansion (ICADE) I. C. Engine Cycle

2008 ◽  
Author(s):  
Hayder Abed Dhahad ◽  
Kamal Ch. Khalil
Keyword(s):  
Internal Combustion Engine ◽  
Compression Ratio ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Otto Cycle ◽  
High Compression Ratio ◽  
Air Mass ◽  
Diesel Cycle ◽  
Unburned Hydrocarbons ◽  
Engine Cycle

The Isolated Combustion and Diluted Expansion (ICADE) internal combustion engine cycle combines the advantages of constant volume combustion of the Otto cycle with the high compression ratio of the Diesel cycle. In this work we studies the effect of Isolated air mass on the efficiency of the cycle, the analysis shown that the decrease of Isolated air mass will increase the efficiency of the cycle, the large dilution air mass will quenches all NOx forming reactions and reduce unburned hydrocarbons. Furthermore, the effect of Fuel / Air ratio on the efficiency studies the analysis shown that the increase of Fuel / Air ratio will increase efficiency of the cycle.

Performance study of the hypocycloid gear mechanism for internal combustion engine applications

2019 ◽  
pp. 146808741989358 ◽  
Author(s):  
Mostafa A ElBahloul ◽  
ELsayed S Aziz ◽  
Constantin Chassapis
Keyword(s):  
Internal Combustion Engine ◽  
Thermodynamic Model ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Combustion Engines ◽  
Otto Cycle ◽  
Engine Efficiency ◽  
Gear Mechanism ◽  
Crank Mechanism

Fuel conversion efficiency is one of the main concerns in the field of internal combustion engine systems. Although the Otto cycle delivers the maximum efficiency possible in theory, the kinematics of the slider–crank mechanism of the conventional internal combustion engines makes it difficult to reach this level of efficiency in practice. This study proposes using the unique hypocycloid gear mechanism instead of the conventional slider–crank mechanism for the internal combustion engines to increase engine efficiency and minimize frictional power losses. The hypocycloid gear mechanism engine’s kinematics provides the means for the piston-rod assembly to reciprocate in a straight-line motion along the cylinder axis besides achieving a nonlinear rate of piston movement. As a result, this characteristic allows for a true constant-volume combustion, which in turn would lead to higher work output. An in-cylinder gas volume change model of the hypocycloid gear mechanism engine was developed and incorporated into the thermodynamic model for the internal combustion engine cycle. The thermodynamic model of the hypocycloid gear mechanism engine was developed and simulated using MATLAB/Simulink software. A comparison between the conventional engine and the hypocycloid gear mechanism engine in terms of engine performance characteristics showed the enhancements achieved using hypocycloid gear mechanism for internal combustion engine applications. The hypocycloid gear mechanism engine analysis results indicated higher engine efficiency approaching that of the Otto cycle.

Effects of Compression Ratio on Performance and Emission of Internal Combustion Engine with Used Vegetable Oil Methyl Easter

2013 ◽  
Vol 768 ◽  
pp. 250-254
Author(s):  
N. Balakrishnan ◽  
K. Mayilsamy ◽  
N. Nedunchezhian
Keyword(s):  
Internal Combustion Engine ◽  
Vegetable Oil ◽  
Compression Ratio ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Maximum Pressure ◽  
Base Line ◽  
Promising Alternative ◽  
Performance And Emission ◽  
Used Vegetable Oil

Biomass derived vegetable oil is a promising alternative fuel for an internal combustion engine. Direct use of vegetable oil has inferior performance with higher emission due to its higher viscous in nature. This can be overcome by transesterification process with its byproduct which is called as used vegetable oil methyl ester. While blending this biodiesel with fossil diesel upto maximum of 30:70, will give the higher performance and lower emission than the fossil diesel alone. In this present study biodiesel in the form of B23 is used in a four stroke water cooled variable compression ratio engine without any modifications. The performance and emission characteristics are studied with different compression ratio and compared with a base line fossil diesel mode operation. This study reveals that the compression ratio of 18 is the optimum in the view of ignition delay, maximum pressure crank angle, exhaust gas temperature and Smoke emission.

scholarly journals Crude palm oil as a complementary fuel for power generation in Amazonia: diesel engine performance, emissions, and economic assessment

2019 ◽  
Vol 42 ◽  
pp. e43882
Author(s):  
Omar Seye ◽  
Rubem Cesar Rodrigues Souza ◽  
Ramon Eduardo Pereira Silva ◽  
Robson Leal da Silva
Keyword(s):  
Power Generation ◽  
Diesel Engine ◽  
Internal Combustion Engine ◽  
Palm Oil ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Nox Emissions ◽  
Crude Palm Oil ◽  
Diesel Cycle

This paper evaluates internal combustion engine performance parameters (Specific Fuel Consumption and engine torque) and pollutant emissions (O2, CO, and NOX), and also, provide an assessment of economic viability for operation in Amazonas state. Power supply to the communities in the Amazon region has as characteristics high costs for energy generation and low fare. Extractive activities include plenty of oily plant species, with potential use as biofuel for ICE (Diesel cycle) to obtain power generation together with pollutant emission reduction in comparison to fossil fuel. Experimental tests were carried out with five fuel blends (crude palm oil) and diesel, at constant angular speed (2,500 RPM – stationary regime), and four nominal engine loads (0%, 50%, 75%, and 100%) in a test bench dynamometer for an engine-driven generator for electrical-power, 4-Stroke internal combustion engine, Diesel cycle. Main conclusions are: a) SFC and torque are at the same order of magnitude for PO-00 (diesel) and PO-xx at BHP50/75/100%; b) O2 emissions show consistent decreasing behavior as BHP increases, compatible to a rich air-fuel ratio (λ > 1) and, at the same BHP condition, O2 (%) is slightly lower for higher PO-xx content; c) The CO emissions for PO-00 consistently decrease while the BHP increases, as for PO-xx those values present a non-linear behavior; at BHP75%-100_loads, CO emissions are higher for PO-20 and PO-25 in comparison to PO-00; d) The overall trend for NOX emissions is to increase, the higher the BHP; In general, NOx emissions are lower for PO-xx in comparison to PO-00, except for PO-10 which presents slightly higher values than PO-00 for all BHP range; e) Assessment on-trend costs indicates that using palm oil blends for Diesel engine-driven generators in the Amazon region is economically feasible, with an appropriate recommendation for a rated power higher than 800 kW.

The Measurement of Air Velocity in a Motored Internal Combustion Engine Using a Hot-Wire Anemometer

1970 ◽  
Vol 185 (1) ◽  
pp. 583-591 ◽  
Author(s):  
H. Hassan ◽  
J. C. Dent
Keyword(s):  
Fixed Point ◽  
Internal Combustion Engine ◽  
Constant Temperature ◽  
Compression Ratio ◽  
Engine Speed ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Hot Wire ◽  
Gas Velocity ◽  
Air Velocity

The application of the constant temperature hot-wire anemometer to the measurement of instantaneous gas velocity in the pre-chamber of a motored I.C. engine is shown to be possible. The correction of the anemometer output to allow for the operation of the wire at conditions greatly removed from those of a windtunnel calibration are discussed. The variation of gas velocity at a fixed point in the pre-chamber with variation of engine compression ratio and engine speed was studied.

Sign in / Sign up

Export Citation Format

Share Document