Design and Structural Analysis of Mono Pile Foundation for Offshore Wind Turbines

2010 ◽  
Author(s):  
Jianhua Zhang ◽  
Zhenqing Wang ◽  
Liang Zhang ◽  
Ke Sun ◽  
Jun Hao
Keyword(s):  
Finite Element ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Pile Foundation ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Bohai Bay ◽  
Time Dynamic ◽  
Stress And Deformation

Offshore wind energy offers a huge potential for expansion of renewable energy in the world. However, placement of wind turbines in harsh offshore environments is an engineering challenge, which requires development of suitable foundation designs. This paper shows different foundation types which are decided by different cases of the seabed. The mono pile foundation for 1.5MW offshore wind turbine is designed for Bohai Bay in China considering the soil and seabed condition. A three dimensional (3D) finite element model of mono pile is established to analyze horizontal ultimate bearing capacity, stress and deformation under lateral loads. Through the modal analysis, the natural frequencies of the mono-pile are given. Results show that the designed mono pile can effectively preclude resonance with the wind turbine. Dynamic responses under wave and seismic loads are analyzed by transient analysis method. And at same time, dynamic amplification factors of stress and deformation are studied. The paper reaches the conclusion that the dynamic effect must be attached importance in the design. Moreover, based on the theory of stability, the simplified method to assess the ultimate buckling moment of the mono pile is put forward. Comparisons are also made with results calculated by codified rules of DNV and ABS and Finite Element Method. Besides, fatigue analysis is carried out according the codified rules of API. The numerical results demonstrate that the design of mono pile is reasonable and reliable. The research results can provide the reference for practical engineering in China.

scholarly journals Support condition monitoring of offshore wind turbines using model updating techniques

2019 ◽  
Vol 19 (4) ◽  
pp. 1017-1031 ◽  
Author(s):  
Ying Xu ◽  
George Nikitas ◽  
Tong Zhang ◽  
Qinghua Han ◽  
Marios Chryssanthopoulos ◽  
...  
Keyword(s):  
Finite Element ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Model Updating ◽  
Element Model ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Support Condition ◽  
Offshore Wind Turbines ◽  
Wind Turbine System

The offshore wind turbines are dynamically sensitive, whose fundamental frequency can be very close to the forcing frequencies activated by the environmental and turbine loads. Minor changes of support conditions may lead to the shift of natural frequencies, and this could be disastrous if resonance happens. To monitor the support conditions and thus to enhance the safety of offshore wind turbines, a model updating method is developed in this study. A hybrid sensing system was fabricated and set up in the laboratory to investigate the long-term dynamic behaviour of the offshore wind turbine system with monopile foundation in sandy deposits. A finite element model was constructed to simulate structural behaviours of the offshore wind turbine system. Distributed nonlinear springs and a roller boundary condition are used to model the soil–structure interaction properties. The finite element model and the test results were used to analyse the variation of the support condition of the monopile, through an finite element model updating process using estimation of distribution algorithms. The results show that the fundamental frequency of the test model increases after a period under cyclic loading, which is attributed to the compaction of the surrounding sand instead of local damage of the structure. The hybrid sensing system is reliable to detect both the acceleration and strain responses of the offshore wind turbine model and can be potentially applied to the remote monitoring of real offshore wind turbines. The estimation of distribution algorithm–based model updating technique is demonstrated to be successful for the support condition monitoring of the offshore wind turbine system, which is potentially useful for other model updating and condition monitoring applications.

Dynamic Responses of a Spar Type Floating Offshore Wind Turbine With Failed Moorings

2020 ◽  
Author(s):  
Yajun Ren ◽  
Vengatesan Venugopal
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Mooring System ◽  
Floating Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Platform Motions

Abstract The complex dynamic characteristics of Floating Offshore Wind Turbines (FOWTs) have raised wider consideration, as they are likely to experience harsher environments and higher instabilities than the bottom fixed offshore wind turbines. Safer design of a mooring system is critical for floating offshore wind turbine structures for station keeping. Failure of mooring lines may lead to further destruction, such as significant changes to the platform’s location and possible collisions with a neighbouring platform and eventually complete loss of the turbine structure may occur. The present study focuses on the dynamic responses of the National Renewable Energy Laboratory (NREL)’s OC3-Hywind spar type floating platform with a NREL offshore 5-MW baseline wind turbine under failed mooring conditions using the fully coupled numerical simulation tool FAST. The platform motions in surge, heave and pitch under multiple scenarios are calculated in time-domain. The results describing the FOWT motions in the form of response amplitude operators (RAOs) and spectral densities are presented and discussed in detail. The results indicate that the loss of the mooring system firstly leads to longdistance drift and changes in platform motions. The natural frequencies and the energy contents of the platform motion, the RAOs of the floating structures are affected by the mooring failure to different degrees.

Analysis of Octagonal Pile Supporting Offshore Wind Turbines Under Wave Loads

2014 ◽  
Author(s):  
Serena Lim ◽  
Longbin Tao
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Computational Cost ◽  
Offshore Wind ◽  
Computational Time ◽  
Offshore Wind Turbine ◽  
Wave Loads ◽  
Element Method

Offshore wind energy development has gained considerable momentum around the world as wind is stronger and steadier offshore compared to land. This has led to a significant increase in production in recent years, especially offshore wind turbine embedded in shallow waters, such as the recent large scale offshore wind farms in the Northern Europe region. Being at the offshore waters, the wind turbines are subjected to harsh environment. The pile supporting the wind turbine must be reliable and able to withstand such sea condition. It is an important part of the design to study the structural behaviour of the piles under the wave loads. Due to the significant capital cost associated with the fabrication of the large circular cylinders, a new recommended innovative design to overcome such problem is to substitute the circular cylinder with a vertical monopile of octagonal cross-sectional shape. This paper describes the development of an efficient numerical model for structural analysis of wave interaction with octagonal pile using a modified semi analytical Scaled Boundary Finite Element Method (SBFEM). In contrast to the existing solutions obtained using the traditional methods such as the Finite Element Method (FEM) which typically suffer from high computational cost and the Boundary Element Method (BEM) which faces limitation from fundamental equations and problems with singularities. The most prominent advantage that SBFEM has over the FEM is in terms of the number of elements used for calculation and hence a reduction in computational time. When compared with BEM, the SBFEM does not suffer from computational stability problems.

scholarly journals Dynamic Response of Articulated Offshore Wind Turbines under Different Water Depths

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2784
Author(s):  
Pei Zhang ◽  
Shugeng Yang ◽  
Yan Li ◽  
Jiayang Gu ◽  
Zhiqiang Hu ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Responses ◽  
Wind Pressure ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Offshore Area ◽  
Offshore Wind Turbines ◽  
Water Depths

Focusing on the transitional depth offshore area from 50 m to 75 m, types of articulated foundations are proposed for supporting the NREL 5 MW offshore wind turbine. To investigate the dynamic behaviors under various water depths, three articulated foundations were adopted and numerical simulations were conducted in the time domain. An in-house code was chosen to simulate the dynamic response of the articulated offshore wind turbine. The aerodynamic load on rotating blades and the wind pressure load on tower are calculated based on the blade element momentum theory and the empirical formula, respectively. The hydrodynamic load is simulated by 3D potential flow theory. The motions of foundation, the aerodynamic performance of the wind turbine, and the loads on the articulated joint are documented and compared in different cases. According to the simulation, all three articulated offshore wind turbines show great dynamic performance and totally meet the requirement of power generation under the rated operational condition. Moreover, the comparison is based on time histories and spectra among these responses. The result shows that dynamic responses of the shallower one oscillate more severely compared to the other designs.

scholarly journals Improving the Strategy of Maintaining Offshore Wind Turbines through Petri Net Modelling

2021 ◽  
Vol 11 (2) ◽  
pp. 574
Author(s):  
Rundong Yan ◽  
Sarah Dunnett
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Petri Net ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Costs ◽  
Offshore Wind Turbines ◽  
Major Repair ◽  
Wind Turbine System ◽  
Periodic Maintenance

In order to improve the operation and maintenance (O&M) of offshore wind turbines, a new Petri net (PN)-based offshore wind turbine maintenance model is developed in this paper to simulate the O&M activities in an offshore wind farm. With the aid of the PN model developed, three new potential wind turbine maintenance strategies are studied. They are (1) carrying out periodic maintenance of the wind turbine components at different frequencies according to their specific reliability features; (2) conducting a full inspection of the entire wind turbine system following a major repair; and (3) equipping the wind turbine with a condition monitoring system (CMS) that has powerful fault detection capability. From the research results, it is found that periodic maintenance is essential, but in order to ensure that the turbine is operated economically, this maintenance needs to be carried out at an optimal frequency. Conducting a full inspection of the entire wind turbine system following a major repair enables efficient utilisation of the maintenance resources. If periodic maintenance is performed infrequently, this measure leads to less unexpected shutdowns, lower downtime, and lower maintenance costs. It has been shown that to install the wind turbine with a CMS is helpful to relieve the burden of periodic maintenance. Moreover, the higher the quality of the CMS, the more the downtime and maintenance costs can be reduced. However, the cost of the CMS needs to be considered, as a high cost may make the operation of the offshore wind turbine uneconomical.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

scholarly journals Physical Modelling of Offshore Wind Turbine Foundations for TRL (Technology Readiness Level) Studies

2021 ◽  
Vol 9 (6) ◽  
pp. 589
Author(s):  
Subhamoy Bhattacharya ◽  
Domenico Lombardi ◽  
Sadra Amani ◽  
Muhammad Aleem ◽  
Ganga Prakhya ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Prior Experience ◽  
Physical Modelling ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Foundation Design ◽  
Offshore Wind Turbines ◽  
Sea Bed ◽  
Geological Conditions

Offshore wind turbines are a complex, dynamically sensitive structure due to their irregular mass and stiffness distribution, and complexity of the loading conditions they need to withstand. There are other challenges in particular locations such as typhoons, hurricanes, earthquakes, sea-bed currents, and tsunami. Because offshore wind turbines have stringent Serviceability Limit State (SLS) requirements and need to be installed in variable and often complex ground conditions, their foundation design is challenging. Foundation design must be robust due to the enormous cost of retrofitting in a challenging environment should any problem occur during the design lifetime. Traditionally, engineers use conventional types of foundation systems, such as shallow gravity-based foundations (GBF), suction caissons, or slender piles or monopiles, based on prior experience with designing such foundations for the oil and gas industry. For offshore wind turbines, however, new types of foundations are being considered for which neither prior experience nor guidelines exist. One of the major challenges is to develop a method to de-risk the life cycle of offshore wind turbines in diverse metocean and geological conditions. The paper, therefore, has the following aims: (a) provide an overview of the complexities and the common SLS performance requirements for offshore wind turbine; (b) discuss the use of physical modelling for verification and validation of innovative design concepts, taking into account all possible angles to de-risk the project; and (c) provide examples of applications in scaled model tests.

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

Coupled Dynamic Analysis for Multi-Unit Floating Offshore Wind Turbine in Maximum Operational and Survival Conditions

2015 ◽  
Author(s):  
H. K. Jang ◽  
H. C. Kim ◽  
M. H. Kim ◽  
K. H. Kim
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Random Waves ◽  
Mooring Lines ◽  
Floating Offshore Wind Turbine ◽  
Coupled Dynamic Analysis ◽  
Floating Offshore Wind Turbines

Numerical tools for a single floating offshore wind turbine (FOWT) have been developed by a number of researchers, while the investigation of multi-unit floating offshore wind turbines (MUFOWT) has rarely been performed. Recently, a numerical simulator was developed by TAMU to analyze the coupled dynamics of MUFOWT including multi-rotor-floater-mooring coupled effects. In the present study, the behavior of MUFOWT in time domain is described through the comparison of two load cases in maximum operational and survival conditions. A semi-submersible floater with four 2MW wind turbines, moored by eight mooring lines is selected as an example. The combination of irregular random waves, steady currents and dynamic turbulent winds are applied as environmental loads. As a result, the global motion and kinetic responses of the system are assessed in time domain. Kane’s dynamic theory is employed to formulate the global coupled dynamic equation of the whole system. The coupling terms are carefully considered to address the interactions among multiple turbines. This newly developed tool will be helpful in the future to evaluate the performance of MUFOWT under diverse environmental scenarios. In the present study, the aerodynamic interactions among multiple turbines including wake/array effect are not considered due to the complexity and uncertainty.

Study on the Dynamic Response for Floating Foundation of Offshore Wind Turbine

2011 ◽  
Author(s):  
Yougang Tang ◽  
Jun Hu ◽  
Liqin Liu
Keyword(s):  
Wind Turbine ◽  
Wind Farm ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wave Load ◽  
Mooring Lines ◽  
Floating Foundation ◽  
Wind Turbine System ◽  
Sea Area

The wind resources for ocean power generation are mostly distributed in sea areas with the distance of 5–50km from coastline, whose water depth are generally over 20m. To improve ocean power output and economic benefit of offshore wind farm, it is necessary to choose floating foundation for offshore wind turbine. According to the basic data of a 600kW wind turbine with a horizontal shaft, the tower, semi-submersible foundation and mooring system are designed in the 60-meter-deep sea area. Precise finite element models of the floating wind turbine system are established, including mooring lines, floating foundation, tower and wind turbine. Dynamic responses for the floating foundation of offshore wind turbine are investigated under wave load in frequency domain.

Sign in / Sign up

Export Citation Format

Share Document