A Rankine Panel Method for Added Resistance of Ships in Waves

Author(s):  
Heinrich Söding ◽  
Vladimir Shigunov ◽  
Thomas E. Schellin ◽  
Ould el Moctar

A new Rankine panel method and an extended RANS solver were employed to predict added resistance in head waves at different Froude numbers of a Wigley hull, a large tanker, and a modern containership. The frequency domain panel method, using Rankine sources as basic flow potentials, accounts for the interaction of the linear periodic wave-induced flow with the nonlinear steady flow caused by the ship’s forward speed in calm water, including nonlinear free surface conditions and dynamic squat. Added resistance in waves is obtained by pressure integration method. The time domain RANS solver, based on a finite volume method, is extended to solve the nonlinear equations of the rigid body six-degrees-of-freedom ship motions. The favorable comparison of panel and RANS predictions demonstrated that the Rankine method is suitable to efficiently obtain reliable predictions of added resistance of ships in waves. Comparable model test predictions correlated less favorably although overall agreement was felt to be acceptable, considering the difficulties associated with procedures to obtain accurate measurements.

Author(s):  
Heinrich Söding ◽  
Vladimir Shigunov ◽  
Thomas E. Schellin ◽  
Ould el Moctar

A new Rankine panel method and an extended Reynolds-Averaged Navier–Stokes (RANS) solver were employed to predict added resistance in head waves at different Froude numbers of a Wigley hull, a large tanker, and a modern containership. The frequency domain panel method, using Rankine sources as basic flow potentials, accounts for the interaction of the linear periodic wave-induced flow with the nonlinear steady flow caused by the ship's forward speed in calm water, including nonlinear free surface conditions and dynamic squat. Added resistance in waves is obtained by the pressure integration method. The time domain RANS solver, based on a finite volume method, is extended to solve the nonlinear equations of the rigid body six-degrees-of-freedom ship motions. The favorable comparison of the panel and RANS predictions demonstrated that the Rankine method is suitable to efficiently obtain reliable predictions of added resistance of ships in waves. Comparable model test predictions correlated less favorably, although the overall agreement was felt to be acceptable, considering the difficulties associated with the procedures to obtain accurate measurements.


Author(s):  
LiXiang Guo ◽  
JiaWei Yu ◽  
JiaJun Chen ◽  
KaiJun Jiang ◽  
DaKui Feng

It is critical to be able to estimate a ship’s response to waves, since the added resistance and loss of speed may cause delays or course alterations, with consequent financial repercussions. Traditional methods for the study of ship motions are based on potential flow theory without viscous effects. Results of scaling model are used to predict full-scale of response to waves. Scale effect results in differences between the full-scale prediction and reality. The key objective of this study is to perform a fully nonlinear unsteady RANS simulation to predict the ship motions and added resistance of a full-scale KRISO Container Ship. The analyses are performed at design speeds in head waves, using in house computational fluid dynamics (CFD) to solve RANS equation coupled with two degrees of freedom (2DOF) solid body motion equations including heave and pitch. RANS equations are solved by finite difference method and PISO arithmetic. Computations have used structured grid with overset technology. Simulation results show that the total resistance coefficient in calm water at service speed is predicted by 4 .68% error compared to the related towing tank results. The ship motions demonstrated that the current in house CFD model predicts the heave and pitch transfer functions within a reasonable range of the EFD data, respectively.


1991 ◽  
Author(s):  
G. K. Kapsenberg

A new experimental technique is presented to test sailing yachts in waves. The method is suitable for the investigation of ship motions in all six degrees of freedom and added resistance for the close hauled condition. Measurements can be made both in regular waves and in irregular seas. The technique has been tried out on a model of a 12-Meter class yacht and showed a resistance increase for the yacht sailing to windward in a wind generated sea of 90% of the calm water resistance.


2020 ◽  
Vol 64 (01) ◽  
pp. 61-80
Author(s):  
Ping-Chen Wu ◽  
Md. Alfaz Hossain ◽  
Naoki Kawakami ◽  
Kento Tamaki ◽  
Htike Aung Kyaw ◽  
...  

Ship motion responses and added resistance in waves have been predicted by a wide variety of computational tools. However, validation of the computational flow field still remains a challenge. In the previous study, the flow field around the Korea Research Institute for Ships and Ocean Engineering (KRISO) Very Large Crude-oil Carrier 2 tanker model with and without propeller condition and without rudder condition was measured by the authors, as well as the resistance and self-propulsion tests in waves. In this study, the KRISO container ship model appended with a rudder was used for the higher Froude number .26 and smaller block coefficient .65. The experiments were conducted in the Osaka University towing tank using a 3.2-m-long ship model for resistance and self-propulsion tests in waves. Viscous flow simulation was performed by using CFDShip-Iowa. The wave conditions proposed in Computational Fluid Dynamics (CFD) Workshop 2015 were considered, i.e., the wave-ship length ratio λ/L = .65, .85, 1.15, 1.37, 1.95, and calm water. The objective of this study was to validate CFD results by Experimental Fluid Dynamics (EFD) data for ship vertical motions, added resistance, and wake flow field. The detailed flow field for nominal wake and self-propulsion condition will be analyzed for λ/L = .65, 1.15, 1.37, and calm water. Furthermore, bilge vortex movement and boundary layer development on propeller plane, propeller thrust, and wake factor oscillation in waves will be studied.


2015 ◽  
Author(s):  
Hamid Sadat-Hosseini ◽  
Serge Toxopeus ◽  
Dong Hwan Kim ◽  
Teresa Castiglione ◽  
Yugo Sanada ◽  
...  

Experiments, CFD and PF studies are performed for the KCS containership advancing at Froude number 0.26 in calm water and regular waves. The validation studies are conducted for variable wavelength and wave headings with wave slope of H/λ=1/60. CFD computations are conducted using two solvers CFDShip-Iowa and STAR-CCM+. PF studies are conducted using FATIMA. For CFD computations, calm water and head wave simulations are performed by towing the ship fixed in surge, sway, roll and yaw, but free to heave and pitch. For variable wave heading simulations, the roll motion is also free. For PF, the ship model moves at a given speed and the oscillations around 6DOF motions are computed for variable wave heading while the surge motion for head waves is restrained by adding a very large surge damping. For calm water, computations showed E<4%D for the resistance,<8%D for the sinkage, and <40%D for the trim. In head waves with variable wavelength, the errors for first harmonic variables for CFD and PF computations were small, <5%DR for amplitudes and <4%2π for phases. The errors for zeroth harmonics of motions and added resistance were large. For the added resistance, the largest error was for the peak location at λ/L=1.15 where the data also show large scatter. For variable wave heading at λ/L=1.0, the errors for first harmonic amplitudes were <17%DR for CFD and <26%DR for PF. The comparison errors for first harmonic phases were E<24%2π. The errors for the zeroth harmonic of motions and added resistance were again large. PF studies for variable wave headings were also conducted for more wavelength condition, showing good predictions for the heave and pitch motions for all cases while the surge and roll motions and added resistance were often not well predicted. Local flow studies were conducted for λ/L=1.37 to investigate the free surface profile and wake field predicted by CFD. The results showed a significant fluctuation in the wake field which can affect the propeller/engine performance. Additionally it was found that the average propeller inflow to the propeller is significantly higher in waves.


Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave- pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.


2017 ◽  
Vol 159 (A4) ◽  
Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave-pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.


2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Chang-Wook Park ◽  
Jeonghwa Seo ◽  
Shin Hyung Rhee

A series of model tests of a caisson in wet towing were conducted in a towing tank to assess the stability and effective power requirement in calm water and head sea conditions. The scale ratio of the model was 1/30, and the model-length-based Froude number in the tests ranged from 0.061 to 0.122, which is equivalent to 2 and 4 knots in the full scale, respectively. During the towing of the model, tension on the towline and six-degrees-of-freedom (6DOF) motion of the model were measured. Under the calm water condition, the effects of towing speed, draft, and initial trim variation on the towing stability and effective power were investigated. Initial trim improved stability and reduced required towing power. In head seas, effective power and towing stability were changed with the wavelength. It increased as the wavelength became longer, but the added resistance in long waves also stabilized the model with reduced yaw motion.


Sign in / Sign up

Export Citation Format

Share Document