Study on the Flow Field and the Shielding Effect of a Hemisphere Artificial Reef and Other Alike Sub-Sea Structures

Author(s):  
Lin Zhao ◽  
Junwei Tan

Abstract A hemisphere artificial reef is designed and numerically simulated in this paper. Investigations of this structure subject to various flow fields with different hole ratios and different diameter are carried out. Besides, the effect of the hemisphere structure to the surrounding flow field is discussed. Further studies are carried out for an array of hemisphere structures of this kind. Comparing to the traditional artificial structures like the trapezoidal reefs and square reefs, the hemisphere reef can not only produce a qualified ascending flow field, but his internal shadowing effect is not negligible.This area then can provide a better ocean ecological environment and living environment to attach and promote the marine life.

2014 ◽  
Vol 641-642 ◽  
pp. 537-543
Author(s):  
Chen Wang ◽  
Yuan Xu Meng

Green space system planning is the most direct method to improve urban ecological environment from the perspective of planning. However, traditional way of green space system planning exposes its limitation of paying attention to only urban area, accompanied by the prominent appeal for the enhancement of urban ecological environment and living environment quality. Therefore, the study gives a preliminary discussion on the method of green spaces system planning based on GI theory by introducing the concept and characteristic of GI, and proposes urban-rural integrated green space environment formed by the organic combination of Hubs, Links, and Sites and an urban green space system able to keep the integrality and consecutiveness of natural ecological process, which offers reference for green space system planning of the new era.


Author(s):  
Yi Han ◽  
Feng Liu ◽  
Xin Ran

In the production process of large-diameter seamless steel pipes, the blank heating quality before roll piercing has an important effect on whether subsequently conforming piping is produced. Obtaining accurate pipe blank heating temperature fields is the basis for establishing and optimizing a seamless pipe heating schedule. In this paper, the thermal process in a regenerative heating furnace was studied using fluent software, and the distribution laws of the flow field in the furnace and of the temperature field around the pipe blanks were obtained and verified experimentally. The heating furnace for pipe blanks was analyzed from multiple perspectives, including overall flow field, flow fields at different cross sections, and overall temperature field. It was found that the changeover process of the regenerative heating furnace caused the temperature in the upper part of the furnace to fluctuate. Under the pipe blanks, the gas flow was relatively thin, and the flow velocity was relatively low, facilitating the formation of a viscous turbulent layer and thereby inhibiting heat exchange around the pipe blanks. The mutual interference between the gas flow from burners and the return gas from the furnace tail flue led to different flow velocity directions at different positions, and such interference was relatively evident in the middle part of the furnace. A temperature “layering” phenomenon occurred between the upper and lower parts of the pipe blanks. The study in this paper has some significant usefulness for in-depth exploration of the characteristics of regenerative heating furnaces for steel pipes.


2011 ◽  
Vol 368-373 ◽  
pp. 3602-3606
Author(s):  
Ze Xin Li ◽  
Min Chen

Underdeveloped rural areas have good but very vulnerable ecological environment, so the environment protection should be given priority in new rural construction. Based on the problems that rural areas have faced in ecological environment, some thoughts are given in this paper on ecological and environmental: ①To solve the conflicts between the development of rural economy and ecological environment protection, the development of eco-industry can be a key solution. ② For the point that people of underdeveloped areas live in scattered and small scale groups, which leads to difficulty in facility arrangements, some proposals are put forward on the construction of living environment in underdeveloped new rural areas.


2013 ◽  
Vol 291-294 ◽  
pp. 1981-1984
Author(s):  
Zhang Xia Guo ◽  
Yu Tian Pan ◽  
Yong Cun Wang ◽  
Hai Yan Zhang

Gunpowder was released in an instant when the pill fly out of the shell during the firing, and then formed a complicated flow fields about the muzzle when the gas expanded sharply. Using the 2 d axisymmetric Navier-Stokes equation combined with single equation turbulent model to conduct the numerical simulation of the process of gunpowder gass evacuating out of the shell without muzzle regardless of the pill’s movement. The numerical simulation result was identical with the experimental. Then simulated the evacuating process of gunpowder gass of an artillery with muzzle brake. The result showed complicated wave structure of the flow fields with the muzzle brake and analysed the influence of muzzle brake to the gass flow field distribution.


1979 ◽  
Vol 21 (1) ◽  
pp. 1-6 ◽  
Author(s):  
D. Adler ◽  
Y. Levy

A laser-Doppler technique is successfully applied to measure the flow field inside a closed, backswept impeller, through a rotating window. Results show that, in contrast to the flow in many radial-exit impellers, the flow in the backswept impeller is stable and attached. Further, comparison with an open impeller demonstrates the fundamental difference in the flow fields near the shroud.


2006 ◽  
Vol 4 (3) ◽  
pp. 365-368 ◽  
Author(s):  
Guo-Bin Jung ◽  
Ay Su ◽  
Cheng-Hsin Tu ◽  
Fang-Bor Weng ◽  
Shih-Hung Chan

The flow-field design of direct methanol fuel cells (DMFCs) is an important subject about DMFC performance. Flow fields play an important role in the ability to transport fuel and drive out the products (H2O,CO2). In general, most fuel cells utilize the same structure of flow field for both anode and cathode. The popular flow fields used for DMFCs are parallel and grid designs. Nevertheless, the characteristics of reactants and products are entirely different in anode and cathode of DMFCs. Therefore, the influences of flow fields design on cell performance were investigated based on the same logic with respect to the catalyst used for cathode and anode nonsymmetrically. To get a better and more stable performance of DMFCs, three flow fields (parallel, grid, and serpentine) utilized with different combinations were studied in this research. As a consequence, by using parallel flow field in the anode side and serpentine flow-field in the cathode, the highest power output was obtained.


2021 ◽  
Author(s):  
Rishabh Prakash Sharma ◽  
Max P. Cooper ◽  
Anthony J.C. Ladd ◽  
Piotr Szymczak

<p>Dissolution of porous rocks by reactive fluids is a highly nonlinear process resulting in a variety of dissolution patterns, the character of which depends on physical conditions such as flow rate and reactivity of the fluid. Long, finger-like dissolution channels, “wormholes”, are the main subject of interest in the literature, however, the underlying dynamics of their growth remains unclear. </p><p>While analyzing the tomography data on wormhole growth.  one open question is to define the exact position of the tip of the wormhole. Near the tip the wormhole gradually thins out and the proper resolution of its features is hindered by the finite spatial resolution of the tomographs. In particular, we often observe in the near-tip region several disconnected regions of porosity growth, which - as we hypothesized - are connected by the dissolution channels at subpixel scale. In this study, we show how these features can be better resolved by using numerically calculated flow fields in the reconstructed pore-space. </p><p>We used 70 micrometers, 16-bit grayscale X-ray computed microtomography (XCMT) time series scans of limestone cores, 14mm in diameter and 25mm in length. Scans were performed during the entire dissolution experiment with an interval of 8 minutes. These scans were further processed using a 3-phase segmentation proposed by Luquot et al.[1], in which grayscale voxels are converted to macro-porosity, micro-porosity and grain phases from their grayscale values. The macro-porous phase is assigned a porosity of 1, while the grain phase is assigned 0. Micro-porous regions are assigned an intermediate value determined by linear interpolation between pore and grain threshold using grayscale values. An OpenFOAM based, Darcy-Brinkman solver, porousFoam, is then used to calculate the flow field in this extracted porosity field. </p><p>Porosity contours reconstructed from the tomographs show some disconnected porosity growth near the tip region which later become part of the wormhole in subsequent scans. We have used a novel approach by including the micro-porosity phase in pore-space to calculate the flow-fields in the near-tip region. The calculated flow fields clearly show an extended region of focused flow in front of the wormhole tip, which is a manifestation of the presence of a wormhole at the subpixel scale. These results show that micro-porosity plays an important role in dissolution and 3-phase segmentation combined with the flow field calculations is able to capture the sub-resolved dissolution channels. </p><p> </p><p> [1] Luquot, L., Rodriguez, O., and Gouze, P.: Experimental characterization of porosity structure and transport property changes in limestone undergoing different dissolution regimes, Transport Porous Med., 101, 507–532, 2014</p>


2004 ◽  
Vol 47 (1) ◽  
pp. 113-120 ◽  
Author(s):  
Patricia Teresa Monteiro Cunningham ◽  
Andreia de Carvalho Saul

The aim of this work was to study the spatial partition dynamics of fish at artificial structures. Holed structured concrete blocks were used to construct eight identical artificial structures and disposed between 3m-6m depths. Installation was made in two steps during 1996 (May/June and November/December) and daily observations were carried out during 30 consecutive days SCUBA diving. The artificial reef areas were used in discriminated ways by the fish community and was most probably influenced by several factor, mainly biotic. The results of the Krustal-Wallis test led to the refutation of the hypothesis that the artificial structure spaces were shared and randomly used by fish.


Author(s):  
Bing Wei ◽  
Li Zhang

The energy consumption of AC (air conditioning) systems in large buildings is normally higher than the energy consumption in smaller buildings, and its indoor air flow field is also more complex than that in small building. To study the air flow mode and the indoor air flow fields in large spaces is of great significance to the energy conservation of AC systems and thermal comfort of the occupants. This paper presents an example using a large building that uses stratified air conditioning delivered through the linear slot sidewall diffusers and perforated sidewall diffusers. Using CFD simulation methods, three air flow field situations were simulated: (1) total air volume supplied from linear slot diffusers located in the middle of a side wall, (2) 50% flow through the linear slot diffusers the remainder supplied through the perforated sidewall diffusers, (3) 30% of the volume supplied with linear slot diffusers, 70% supplied through the perforated sidewall diffusers. The simulated results show that the third airflow mode is the optimal one for the three modes, which is good for achieving energy conservation and a comfortable building thermal environment in buildings with large spacial areas.


1997 ◽  
Vol 337 ◽  
pp. 49-66 ◽  
Author(s):  
Q. CHEN ◽  
E. RAMÉ ◽  
S. GAROFF

The dynamics of a spreading liquid body are dictated by the interface shape and flow field very near the moving contact line. The interface shape and flow field have been described by asymptotic models in the limit of small capillary number, Ca. Previous work established the validity and limitations of these models of the interface shape (Chen et al. 1995). Here, we study the flow field near the moving contact line. Using videomicroscopy, particle image velocimetry, and digital image analysis, we simultaneously make quantitative measurements of both the interface shape and flow field from 30 μm to a few hundred microns from the contact line. We compare our data to the modulated-wedge solution for the velocity field near a moving contact line (Cox 1986). The measured flow fields demonstrate quantitative agreement with predictions for Ca[les ]0.1, but deviations of ∼5% of the spreading velocity at Ca≈0.4. We observe that the interface shapes and flow fields become geometry independent near the contact line. Our experimental technique provides a way of measuring the interface shape and velocity field to be used as boundary conditions for numerical calculations of the macroscopic spreading dynamics.


Sign in / Sign up

Export Citation Format

Share Document