Presentation of a Numerical 3D Approach to Tackle Thermal Striping in a PWR Nuclear T-Junction

2003 ◽  
Author(s):  
Christophe Pe´niguel ◽  
Marc Sakiz ◽  
Sofiane Benhamadouche ◽  
Jean-Michel Stephan ◽  
Carine Vindeirinho
Keyword(s):  
Numerical Study ◽  
Heat Removal ◽  
Thermal Coupling ◽  
Thermal Fields ◽  
Eddy Simulation ◽  
System A ◽  
Large Eddy ◽  
Piping Systems ◽  
Thermal Striping ◽  
Residual Heat

This paper presents a numerical study to tackle thermal striping phenomena occuring in piping systems. It is here applied to the Residual Heat Removal (RHR) bypass system. A large Eddy Simulation (L.E.S.) approach is used to model the turbulent flow in a T-junction. The thermal coupling between the Finite Volume CFD Code_Saturne and the Finite Element thermal code Syrthes, gives access to the instantaneous field inside the fluid and the solid. By using the instantaneous solid thermal fields, mechanical computations (as presented in (Stephan et al 2002)) are performed to yield the instantaneous mechanical stresses seen by the pipework T-junction and elbow.

Numerical Study of Orifice Cavitation-Induced Instability and Pipe Vibration

2018 ◽  
Author(s):  
Wenjie Bai ◽  
Quan Duan ◽  
Arris S. Tijsseling
Keyword(s):  
Numerical Simulations ◽  
Numerical Study ◽  
Pressure Fluctuations ◽  
Eddy Simulation ◽  
Operation Conditions ◽  
Large Eddy ◽  
Strong Shear ◽  
Piping Systems ◽  
Variation Trends ◽  
Pipe Vibration

Different kinds of orifice are widely used as a resistance element to reduce pressure in various piping systems. However, due to strong shear and turbulence mechanisms around the orifice, it is susceptible to instabilities that generate pressure fluctuations and pipe vibrations. Especially when cavitation occurs, this effect can be very strong. The present work tries to characterize orifice-induced instability by means of numerical simulations and assess pipe vibration levels. Firstly, by taking an elongated orifice as an example, the fluctuating pressure around the orifice is obtained by a Large Eddy Simulation with a 2D unsteady model of cavitation. Secondly, the pipe vibration response is studied with experiment. The variation trends of pressure fluctuation and pipe vibration are analysed under different operation conditions. The results of the simulations can provide a good explanation for pipe vibration. A relationship between orifice cavitation-induced instability and vibration is established based on numerical simulations and experimental results.

NUMERICAL STUDY OF DETONATION PROPAGATION IN VISCOUS TURBULENT FLOW IN A DUCT

2020 ◽  
Author(s):  
V. A. SABELNIKOV ◽  
◽  
V. V. VLASENKO ◽  
S. BAKHNE ◽  
S. S. MOLEV ◽  
...  
Keyword(s):  
Complex Geometry ◽  
Numerical Study ◽  
Navier Stokes ◽  
Detonation Waves ◽  
Detonation Propagation ◽  
Eddy Simulation ◽  
Detonation Structure ◽  
Classical Studies ◽  
Large Eddy ◽  
Physical Effects

Gasdynamics of detonation waves was widely studied within last hundred years - analytically, experimentally, and numerically. The majority of classical studies of the XX century were concentrated on inviscid aspects of detonation structure and propagation. There was a widespread opinion that detonation is such a fast phenomenon that viscous e¨ects should have insigni¦cant in§uence on its propagation. When the era of calculations based on the Reynolds-averaged Navier- Stokes (RANS) and large eddy simulation approaches came into effect, researchers pounced on practical problems with complex geometry and with the interaction of many physical effects. There is only a limited number of works studying the in§uence of viscosity on detonation propagation in supersonic §ows in ducts (i. e., in the presence of boundary layers).

Numerical Study on Air-Reed Instruments With LES

2011 ◽  
Author(s):  
Kin’ya Takahashi ◽  
Masataka Miyamoto ◽  
Yasunori Ito ◽  
Toshiya Takami ◽  
Taizo Kobayashi ◽  
...  
Keyword(s):  
Numerical Study ◽  
Sound Field ◽  
Acoustic Analogy ◽  
Empirical Theory ◽  
Sound Sources ◽  
Aerodynamic Sound ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Semi Empirical ◽  
2D And 3D

The acoustic mechanisms of 2D and 3D edge tones and a 2D small air-reed instrument have been studied numerically with compressible Large Eddy Simulation (LES). Sound frequencies of the 2D and 3D edge tones obtained numerically change with the jet velocity well following Brown’s semi-empirical equation, while that of the 2D air-reed instrument behaves in a different manner and obeys the semi-empirical theory, so called Cremer-Ising-Coltman theory. We have also calculated aerodynamic sound sources for the 2D edge tone and the 2D air-reed instrument relying on Ligthhill’s acoustic analogy and have discussed similarities and differences between them. The sound source of the air-reed instrument is more localized around the open mouth compared with that of the edge tone due to the effect of the strong sound field excited in the resonator.

Large Eddy Simulation of Cross Flow in Pipe Junction

2018 ◽  
Author(s):  
Jiajun Chen ◽  
Yue Sun ◽  
Hang Zhang ◽  
Dakui Feng ◽  
Zhiguo Zhang
Keyword(s):  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cross Flow ◽  
Exciting Force ◽  
Navier Stokes ◽  
Pipe Network ◽  
Eddy Simulation ◽  
Large Eddy

Mixing in pipe junctions can play an important role in exciting force and distribution of flow in pipe network. This paper investigated the cross pipe junction and proposed an improved plan, Y-shaped pipe junction. The numerical study of a three-dimensional pipe junction was performed for calculation and improved understanding of flow feature in pipe. The filtered Navier–Stokes equations were used to perform the large-eddy simulation of the unsteady incompressible flow in pipe. From the analysis of these results, it clearly appears that the vortex strength and velocity non-uniformity of centerline, can be reduced by Y-shaped junction. The Y-shaped junction not only has better flow characteristic, but also reduces head loss and exciting force. The results of the three-dimensional improvement analysis of junction can be used in the design of pipe network for industry.

scholarly journals A Mixed-Fidelity Numerical Study for Fan–Distortion Interaction

2018 ◽  
Vol 140 (9) ◽  
Author(s):  
Yunfei Ma ◽  
Jiahuan Cui ◽  
Nagabhushana Rao Vadlamani ◽  
Paul Tucker
Keyword(s):  
Immersed Boundary Method ◽  
Numerical Study ◽  
Immersed Boundary ◽  
Fan Performance ◽  
Inlet Distortion ◽  
Eddy Simulation ◽  
Pressure Distributions ◽  
Large Eddy ◽  
Dynamics Method ◽  
Good Agreement

Inlet distortion often occurs under off-design conditions when a flow separates within an intake and this unsteady phenomenon can seriously impact fan performance. Fan–distortion interaction is a highly unsteady aerodynamic process into which high-fidelity simulations can provide detailed insights. However, due to limitations on the computational resource, the use of an eddy resolving method for a fully resolved fan calculation is currently infeasible within industry. To solve this problem, a mixed-fidelity computational fluid dynamics method is proposed. This method uses the large Eddy simulation (LES) approach to resolve the turbulence associated with separation and the immersed boundary method (IBM) with smeared geometry (IBMSG) to model the fan. The method is validated by providing comparisons against the experiment on the Darmstadt Rotor, which shows a good agreement in terms of total pressure distributions. A detailed investigation is then conducted for a subsonic rotor with an annular beam-generating inlet distortion. A number of studies are performed in order to investigate the fan's influence on the distortions. A comparison to the case without a fan shows that the fan has a significant effect in reducing distortions. Three fan locations are examined which reveal that the fan nearer to the inlet tends to have a higher pressure recovery. Three beams with different heights are also tested to generate various degrees of distortion. The results indicate that the fan can suppress the distortions and that the recovery effect is proportional to the degree of inlet distortion.

Very Large Eddy Simulation of Passive Drag Control for a D-Shaped Cylinder

2013 ◽  
Vol 135 (10) ◽  
Author(s):  
Xingsi Han ◽  
Siniša Krajnović
Keyword(s):  
Large Eddy Simulation ◽  
Flow Control ◽  
Control Problem ◽  
Bluff Body ◽  
Numerical Study ◽  
Numerical Results ◽  
Complex Flow ◽  
Local Disturbance ◽  
Eddy Simulation ◽  
Large Eddy

The numerical study reported here deals with the passive flow control around a two-dimensional D-shaped bluff body at a Reynolds number of Re=3.6×104. A small circular control cylinder located in the near wake behind the main bluff body is employed as a local disturbance of the shear layer and the wake. 3D simulations are carried out using a newly developed very large eddy simulation (VLES) method, based on the standard k − ε turbulence model. The aim of this study is to validate the performance of this method for the complex flow control problem. Numerical results are compared with available experimental data, including global flow parameters and velocity profiles. Good agreements are observed. Numerical results suggest that the bubble recirculation length is increased by about 36% by the local disturbance of the small cylinder, which compares well to the experimental observations in which the length is increased by about 38%. A drag reduction of about 18% is observed in the VLES simulation, which is quite close to the experimental value of 17.5%. It is found that the VLES method is able to predict the flow control problem quite well.

Sign in / Sign up

Export Citation Format

Share Document